Video není dostupné.
Omlouváme se.
#83 Cub Cadet ZForce SX Deck Removal, Clean, Grease & Install
Vložit
- čas přidán 14. 08. 2024
- How I remove the deck on a Cub Cadet Z-Force SX. Cleaned out the spindles and greased for winter storage. Scraped the under side of the deck of the hardened grass material that the water hook up and pressure washer couldn't get to. Then re-installed the deck for storage.
**I am not a professional and this is for entertainment purposes only. I followed the user manual as I understood it.
Probably could have figured it out on my own, but now I don't have to! Great video. Thanks!
Thanks for sharing this, very informative and helpful!
You're welcome 😁
It still amazes me to see a steering wheel on a zero turn.
Actually a pretty darned good idea.
Since decent technology with it too. The transmission knows to adjust the rear drive for the sharp turns.
Thanks for the video man. Super helpful.
Glad it helped
Good afternoon Dave.
We have snow here at present.
Got 2 inches a week ago. Lost almost all of it throughout the week.
Got another inch last night and this morning. Supposed to be in the 50’s by Thursday according to the top weather guessers.
Currently showing here too Gary. We are supposed to get 4-6 inches. Got the front blower on now though.
Good info, i have a “60 SZ and a bastard of a time lining up the pins of the hight adj arms, already spend an entire Aft wiggling , muscling, swearing and lots of Coffee, ( maybe I’ll try a Brew?)still no success.
This is what led me to your video, you make the reinstall pretty easy.Be going back to it and try again after supper.
If it doesn’t work this time , I’ll commit Hara Kiri, or slit my throat, LOL.
Thanks for the Video
Oh geez don't do that! Once you find your wiggle room and the right spot it'll be so much easier. Takes a little bit of time and yes some muscle at times as well