watch and learn how to replace governor spring on generator. bad/broken spring could cause low speed and current of the generator. #fnaguitarplayer9. kindly subscribe
Bro, you're a life saver... I just fixed my gen rn with this help.. Omo saved me from being stranded this night You have a new subscriber Keep it up.🤝🏻♥️
What could be the reason for the voltmeter power fluctuations? It produces a low current for a while, then a high current later. It continues for a while before it stabilizes.
Hello mate i have a very similar generator, the spring broke on mine but the generator still runs at good RPM and the electricity coming out is fine. I'm worried i might be over running it since it doesn't lower the RPM when there is less Power requirement because from the sound of it its running at 100%. Should i go out and get replacement spring?
You put the spring in a different hole on the governor arm. ( I know, that hole you put it in looked like it had more wear, so was probably the original location.)
Great information. Your camera work needs attention. A lot of shaking, wandering around and I couldn't see the volt meter needle in your video, all blurry.
@@jaywealthmechanics9285 You have a great camera. You might need someone else to do the shooting while you do the talking and pointing. Or maybe you can make a camera stand. Be patient. After the take, look at your video and see if it is what you want it. If not, try again. Keep it up and soon you will be making beautiful videos. It ain't easy. To see some great photographers look at SV Delos, they are amazing (great underwater stuff). Itchyboots (does it all while riding a motorbike) is amazing. But your instructional videos just need a steady hand and maybe a little storyboard scene planning. Good luck.
🙋♂️😂انا احب اتعلم كل شي وعندي خبره لا باس بها المهندس قام في عمل موقت جز بسيط جدآ من المشكله عندما يتعلق الامر في ميزن القوه لا يعمل او لا يادي عمله بشكل الصحيح يكون هنك قطع متهالكه داخل المحرك يجب استبدالها بقطع جديده مثل بلوف لراس الموالد وتغيير شنابر البستم للموالد وافحص عمود الكرنك من التاكل وااليد المتحركه للبستم يتم الفحص نظرين بعد فك المكينه ان وجد فيهم تاكل يجب استبدالهم بقطع جديد ه افضل هذا عامل ميزان القوه للموالد دون ذالك مستحيل يعمل الموالد بشكل المطلوب
Hi bro , my generator 2200w is vibrating with sound of high and low as shown in the video but the current is still 220 and I cleaned the carburetor with cleaner but making the high and low sound , what can be done to it ?
My generator voltage is high to the maximum and I have try and reduce it with the regulator spring but it doesn’t reduce still very high, please what can I do ?
@@nworaanyika8863 my guess, it's probably not getting enough fuel, service the carburetor or adjust the fuel supply screw on the carburetor as a temporary solution
This thing just happened to my Generator today, thanks so much for sharing your knowledge
I will fix it myself
Ok you’re welcome
This helped a lot, thank you very much!!!.
You're welcome 😊
Thanks bro... Mehn bro .. u just saved a life here o bro.. this spring so ahhh mehn... U too much.. I ll promote your channel surely
Thanks 🤗🤗. I will be very grateful 🙏
Bro, you're a life saver... I just fixed my gen rn with this help..
Omo saved me from being stranded this night
You have a new subscriber
Keep it up.🤝🏻♥️
Thanks 🤗🤗.
Thank a lot! Bro
you are welcome sir
Great video
Thanks
👍
🥇
thank you for explain. Could you tell me how to change oil sensor.
I will only show you. I can’t tell you. If I tell you.. you won’t understand.
Top
💯❤️
What could be the reason for the voltmeter power fluctuations? It produces a low current for a while, then a high current later. It continues for a while before it stabilizes.
What size of generator
Hello mate i have a very similar generator, the spring broke on mine but the generator still runs at good RPM and the electricity coming out is fine.
I'm worried i might be over running it since it doesn't lower the RPM when there is less Power requirement because from the sound of it its running at 100%.
Should i go out and get replacement spring?
Yes go and get the spring.. because the generator might not power some of your home appliances, if is not there.
You put the spring in a different hole on the governor arm. ( I know, that hole you put it in looked like it had more wear, so was probably the original location.)
Yeah that is the exact location it should be
Thanks
Welcome
👍👍👍👍💖
🤗
thanks bro! one question please: can a deformed spring (not elastic enough) cause the generator to stall under load ?
Yes. The springs need to be changed every few years, as they will cause running issues when they lose strength, get rusted out or deformed.
Sensing some angry mechanics in the backround 😁😁😁😁😁
Smile 😄
We gonna, we gonna.
9ja people eh 😅
Smile 😃
What's the name of that smaller spring ?
Throttle spring
Great information. Your camera work needs attention. A lot of shaking, wandering around and I couldn't see the volt meter needle in your video, all blurry.
Ohh sorry for that. I will do similar video soon. I don’t have good camera
@@jaywealthmechanics9285 You have a great camera. You might need someone else to do the shooting while you do the talking and pointing. Or maybe you can make a camera stand. Be patient. After the take, look at your video and see if it is what you want it. If not, try again. Keep it up and soon you will be making beautiful videos. It ain't easy. To see some great photographers look at SV Delos, they are amazing (great underwater stuff). Itchyboots (does it all while riding a motorbike) is amazing. But your instructional videos just need a steady hand and maybe a little storyboard scene planning. Good luck.
🙋♂️😂انا احب اتعلم كل شي وعندي خبره لا باس بها المهندس قام في عمل موقت جز بسيط جدآ من المشكله عندما يتعلق الامر في ميزن القوه لا يعمل او لا يادي عمله بشكل الصحيح يكون هنك قطع متهالكه داخل المحرك يجب استبدالها بقطع جديده مثل بلوف لراس الموالد وتغيير شنابر البستم للموالد وافحص عمود الكرنك من التاكل وااليد المتحركه للبستم يتم الفحص نظرين بعد فك المكينه ان وجد فيهم تاكل يجب استبدالهم بقطع جديد ه افضل هذا عامل ميزان القوه للموالد دون ذالك مستحيل يعمل الموالد بشكل المطلوب
Bro like how much is generator carburetor? It's a citizen 3.8kva gen
#4500 sumec firman
@@jaywealthmechanics9285 thanks brother
Il mio generatore abbassa di voltaggio quando collego l'utensile una pompa sommersa scende a 100V cosa devo fare?
Hi bro , my generator 2200w is vibrating with sound of high and low as shown in the video but the current is still 220 and I cleaned the carburetor with cleaner but making the high and low sound , what can be done to it ?
Buy a new carburetor.
My own is to high. I reduced that knob.but no changes
Did you you reduce it from the carburetor
@@jaywealthmechanics9285 No
How do i fix the throttle spring?😢
Remove the carburetor and replace it.
My generator voltage is high to the maximum and I have try and reduce it with the regulator spring but it doesn’t reduce still very high, please what can I do ?
Watch this video to set the governor race. czcams.com/video/jHJfPBGTZT4/video.html
@@jaywealthmechanics9285 but my generator is a bit smaller than this , the spring are different
@@melissavee2621 how many kva?
Please whats the name of the other spring there
Throttle spring
@@jaywealthmechanics9285 thanks.. My generator turns on and then turns off by itself. Please what is the possible problem
@@nworaanyika8863 my guess, it's probably not getting enough fuel, service the carburetor or adjust the fuel supply screw on the carburetor as a temporary solution
How 🤔 started always gavener
☺️☺️
Pls the current from my gen is not stable
Firstly what type/size of generator are you using
pls cheng avr
why did you put new spring in a different hole?