Video není dostupné.
Omlouváme se.
You Wouldn't Believe the Amount of PDGA Approved Equipment 4-5-24
Vložit
- čas přidán 12. 08. 2024
- PDGA Approved Equipment update to 4-4-24.
Justin covers the approved Discs from manufactures; Discmania, Compound Discs, Forge Discs, Sacred Discs, Elevation Disc Golf, Independent Discs Sweden AB, ProtoFlyte, DGA, Clash Discs, and Finuline. He also covers the equipment that was approved from the manufacturers; RPM Discs, Disc Golf Aotearoa, Giant Industry, Doomsday Discs, and Let It Fly.
Chapters
----------------
00:00 - Introduction
00:31 - MD4 New
01:18 - Barb
02:14 - Nail
03:11 - Seed
03:49 - Nimbus (retooled)
05:24 - Soul
05:54 - CNC+ & CNC-
07:02 - Surf and Sonar
07:47 - Millet, Barley, Almond, & Guava Tone Variant
09:15 - Line Tamer
09:57 - RPM Helix II
11:12 - Hiaaro Port
12:34 - Bunker
13:35 - Falcon and Falcon One
14:56 - Outro and The End
#PDGAApproved @PDGAmedia @DiscmaniaGolfDiscs @SacredDiscs @protoflyte780@rpmdiscs @independentdiscs3685@dgadiscgolf @clashdiscs @DoomsdayDiscs
Compound Disc Golf Gave us some updated Flight Numbers for their disc the Barb: 01:18 (4,3,0,3)
The Line Tamer has some flight numbers now too, thanks to @Wingnutlenny! - 09:15 (6/4/0/2)
What are you all most excited about getting a hold of eventually?
Good Stuff!!! 😊
Thanks! 😁
Excited to see protoflytes in person
We are too. If you get a hold of one, let us know what you think!
You should put the names of the discs above the image!
Will do Amigo.
And flight numbers if they're available! @@DiscGolfShow
Drew Gibson likes the RPM baskets.
Oh nice, did he talk about it on a podcast or one of his CZcams vids? Love to see what he says about em'.
It makes me wonder if they are going to try to sell 3D printed discs, or are they just trying to get approved before going to injection molding? Weights are going to change a lot from standard printing TPU, and I can only assume they will eventually rip at the layer lines...
That's a super good question. I was assuming that these were just for prototypes too. I've never thrown a 3d printed disc but ripping from layer lines does seem like it could be a possible issue. What happens if a 3d printed disc hits a tree or something hard?
I just received my ProtoFlyte CNC cut disc yesterday, the original. I would say it feels like a DX Destroyer. It is very domey and feels great in the hand. I was told it was a 13 speed but I haven't verified that. Actually the one I got I wont throw, since I had the manufactures sign it. Also, its cut, so there is no parting line to hint stability. My guess is this will take some damage hitting trees and rocks.
Very cool! The CNC precision is a super interesting concept. I wonder if this leads to SUPER consistent discs. If you get another and throw it let us know how it flys! Thanks for sharing!
Line Tamer is a super OS, flexible midrange. Flat as a board and very bendy so far. Sharp edged and a “thumb track” of sorts. Numbers would be something like 5/4/1/3, maybe 6/4/1/3. I’ll ask tomorrow.
Source: throw with the creator most days. He throws the beat up proto in the PDGA approval pics 😂
Oh that would be awesome if you could find out. I'll post the numbers in the pinned comment.
That proto has been thoroughly tested for sure! Which is a good think in my opinion. Test the crap out of em' I say.
So I was a bit off, but we all know how flight numbers are kinda subjective. He’s had a 980 rated player throw it and that guy has labeled it 6/4/0/2 but with a true “two” fade. Not like an Envy or something that just gently pushes a bit. Dead straight and then bites hard is the verdict. I personally think it’s got a bit of positive turn but I’m nowhere near 980 rated or 500 feet so my opinion is not the one that’s important 😂.
@@Wingnutlenny Thank you so much for following up and providing you own experiences with the disc!
This is only ment as constructive criticism, and I know it's nit picking a little. But YOUR intro text is wrong. It should be "YOU'RE listening to" (not with capital letters though 😅)
LOL, OMG how have I missed that for so many videos? I'm usually a stickler about that too. See what I get for editing these things late at night?! Thanks so much!
@@DiscGolfShow I think you should just leave it now. Double down haha
@@LoyalDW lol... yeah pretend that we WANT it that way lol...