Changing the mower blades on Kubota z125s Zero Turn. Mower blades : www.thepartsbi... I know the jack stands isn't the safest way just the quickest since i don't have a zero turn jack
The Bolts on my Mower are really tight, any advice on how to get them lose? I'm worried that the whole Mower falls off the stand when I push it strongly.
If you have a big enough wrench or breaker bar with socket. I have hit it with a hammer while applying some pressure if you don’t have an impact. It acts like an impact
Hey, is it possible to get a video of how the lights mount to the unit? Mine didn’t come with them, and I have been thinking of getting a set, but can’t figure out how they mount. Thanks
@@benjammin4456 thanks, the idiot that owned mine before me sharpened the blades like a knife instead of going with the natural shape of the blade. Now they are rounded heavily. I dont have an impact so I'm trying to figure out how to hold the blades in place while using a ratchet. Bahaya is hell
G L I have a harbor freight breaker bar and pipe just for that. Once you take them off they won’t be as bad next time. First time I used a spare chunk of wood(2x4 or firewood type ) kinda lodged under the blade really held it in place.
@@benjammin4456 awesome, thanks man. Oh, you thought jack stands were sketchy, I'm using a raised deck and some cinder blocks. Hahaha. As long as you're not yanking more than the supports can handle, you're good.
@@benjammin4456 I need to invest an impact. I wedged a breaker bar on top. Was able to get 2 of them off but one gave a me trouble, the damn top nut came off, not the blade. 🤦🏻♂️
SERIOUS lust envy issues on your toolbox!!!! Very VERY nice!!!!
Highly envious of the tools. 🤤
Love your socket organization.
This video helps a lot… thank you!
The Bolts on my Mower are really tight, any advice on how to get them lose? I'm worried that the whole Mower falls off the stand when I push it strongly.
If you have a big enough wrench or breaker bar with socket. I have hit it with a hammer while applying some pressure if you don’t have an impact. It acts like an impact
Hey, is it possible to get a video of how the lights mount to the unit?
Mine didn’t come with them, and I have been thinking of getting a set, but can’t figure out how they mount.
Thanks
Yeah I can try to get that this weekend
What's the part number for those mulching blades?
G L www.thepartsbiz.com/3-Pack-G6-Gator-Blades-for-54-Kommander-ZG125_p_34909.html. Got them at the following link cheapest I could find at the time
@@benjammin4456 thanks, the idiot that owned mine before me sharpened the blades like a knife instead of going with the natural shape of the blade. Now they are rounded heavily. I dont have an impact so I'm trying to figure out how to hold the blades in place while using a ratchet. Bahaya is hell
G L I have a harbor freight breaker bar and pipe just for that. Once you take them off they won’t be as bad next time. First time I used a spare chunk of wood(2x4 or firewood type ) kinda lodged under the blade really held it in place.
@@benjammin4456 awesome, thanks man. Oh, you thought jack stands were sketchy, I'm using a raised deck and some cinder blocks. Hahaha. As long as you're not yanking more than the supports can handle, you're good.
G L haha whatever it takes to get it done. Good luck and stay safe.
When I try to loosen my bolts on mine all the blades turn?
Jam a piece of wood or stick between the blades and the deck to Keep them from turning while loosening and tightening.
@@benjammin4456 I need to invest an impact. I wedged a breaker bar on top. Was able to get 2 of them off but one gave a me trouble, the damn top nut came off, not the blade. 🤦🏻♂️
@@benjammin4456 Any tips on why my lights are not turning on anymore??
@@JoeThePro24 fuses under the seat would be a first place to start. Could be the switch if you pop it out and check the voltage.
@@JoeThePro24 harbor freights battery one is pretty good for the money.
You a mute ? Don’t speak English ?