Thank the Gods! Someone finally created the perfect 2020 Rav 4 fuse replacement video and.........elaborated on all aspects of the replacement! PERFECT VIDEO!!!
Your explanation is perfect and exactly what I needed! I was beating my head into a brick wall with running a remote wire to my powered subwoofer. You are a scholar and a gentleman!
Does the amperage of the fuse for my accessory (raptor lights) need to match the amperage of the fuse for the slot I'm tapping into? ie. top slot of the pig tail has a 10 amp fuse for the accessory, and the bottom slot has the 7.5 amp fuse from the USB2 slot.
I Have the Rav4 Hybrid XSE 23, I installed my grill lights and tapped into the USB fuse.. BUT my issue is, I don't want to always have it on when I have the car on, I want to be able to turn it on/off like I do with the fog or headlamps... How can I do that??
I want to tap LED lights at the bottom of driver's and passenger's front that turn off when you close the doors on RAV4 2019 Limited. Which fuse I can use? Thank you
Is is necessary to make adding accessories safer for the wire. What you use it for will vary based on the accessory you want to add. I cannot offer much help for adding aftermarket fog lights
Hi There, appreciate all the detailed clarification. it is understood that once we need to plug the pigtail into an existing fuse slot with fuse installed, we need to unplug the existing fuse and then put it on the bottom fuse slot of pigtail with the add-on-fuse on the top fuse slot of pigtail. following the principle, is it correct when I plug the pigtail into an unoccupied fuse slot (without fuse in it), then I just only add the aftermarket add-on-fuse on the top fuse slot of pigtail while leaving the bottom fuse slot of pigtail intact ? Please advise and many thanks ahead.
Hi there, I want to add the raptor light on my RAV4, so I trying to use the usb1 so the fuse tap is going in other direction because In front of its block from tap in? So in this case is there and proper way to put in the fuse ?
Hi, thanks for all the videos. Do you know which fuse is for the head lights or frog lights? I want to attach my raptors lights to one of those fuses. Thanks
Hi. I do not think you can tap into a head lamp or fog light through the fuse. The power is always on and it is controlled by a switch/relay so you need to go to the relay. (This is not easy). You can read the underside of the fuse box cover and it will say "FOG FR" where you will see fuse AND relay. For head lamp, look for "H-LP". The proper way is to add your own switch panel. You can tap into "USB" but that will turn on when the car is on (no control to turn off unless car is off).
I want to add some aftermarket interrior lights but I don't want the on during the day so I was thinking to hook it up when the headlights are on. Is this possible? I have the LE model
Do i have to install the 7.5 fuse that you removed in the add a fuse slot? So there will be two fuse the add a fuse? One us the original fuse that you removed and the other one us the after market that come with?
@@Rav4Gen5 Hi there, following the principle, is it correct if I plug the pigtail to unoccupied fuse slot without fuse, then I just only add the aftermarket fuse on the top fuse slot of the pigtail while leaving the bottom fuse slot of pigtail intact ?
@@Rav4Gen5 sorry I was referring to my raptor lights. I reached out to the company and they are sending me a new set. I had a problem with the wire that connects to the raptor light.
@@Rav4Gen5 I have a 2021 R4P XSE and there are no USB fuses in the engine bay fuse box. I have yet to find a suitable alternative for an accessory fuse tap. Any recommendations?
Thank the Gods! Someone finally created the perfect 2020 Rav 4 fuse replacement video and.........elaborated on all aspects of the replacement! PERFECT VIDEO!!!
Your explanation is perfect and exactly what I needed! I was beating my head into a brick wall with running a remote wire to my powered subwoofer. You are a scholar and a gentleman!
@Rav4Gen5 Really great Video. I havent seen any video on the Rav4 Fuse box on CZcams. Kudos!!
Thank You!
Great explanation!
Especially the importance of the direction regarding installation of the ad-on fuse.
Thank you!
Great video! Thanks!
You make it look easy!
Thank you so much for this video! Very well done.
Does the amperage of the fuse for my accessory (raptor lights) need to match the amperage of the fuse for the slot I'm tapping into?
ie. top slot of the pig tail has a 10 amp fuse for the accessory, and the bottom slot has the 7.5 amp fuse from the USB2 slot.
Which of the fuses is for the front low beam headlights
I Have the Rav4 Hybrid XSE 23, I installed my grill lights and tapped into the USB fuse.. BUT my issue is, I don't want to always have it on when I have the car on, I want to be able to turn it on/off like I do with the fog or headlamps... How can I do that??
I want to tap LED lights at the bottom of driver's and passenger's front that turn off when you close the doors on RAV4 2019 Limited. Which fuse I can use?
Thank you
Is this actually needed to add stuff like LED fog lights and accessories or is it just as an added bonus to make things easier in the long term?
Is is necessary to make adding accessories safer for the wire. What you use it for will vary based on the accessory you want to add. I cannot offer much help for adding aftermarket fog lights
How to make 12V socket which is near gear shift to have permanent supply ?
Which fuse should I use if I want my raptor light only on when I turn the fog lights on
Thank you
How about the empty spot, are they safe to connect?
Hi There, appreciate all the detailed clarification. it is understood that once we need to plug the pigtail into an existing fuse slot with fuse installed, we need to unplug the existing fuse and then put it on the bottom fuse slot of pigtail with the add-on-fuse on the top fuse slot of pigtail.
following the principle, is it correct when I plug the pigtail into an unoccupied fuse slot (without fuse in it), then I just only add the aftermarket add-on-fuse on the top fuse slot of pigtail while leaving the bottom fuse slot of pigtail intact ? Please advise and many thanks ahead.
that it correct.
Can you connect the after market raptor lights to the day lights on a rav4 2019 premium? Thanks
Hi there, I want to add the raptor light on my RAV4, so I trying to use the usb1 so the fuse tap is going in other direction because In front of its block from tap in? So in this case is there and proper way to put in the fuse ?
Which one is the fuse for headlight
I noticed in my LE model that there’s no power ran to my USB ports. The only ones that power off with the car are the group of 6 red 10amps
I have the same problem with my 2021 le. Did you figure out the reason ?
Usb 1 its a dummy use Usb 2 instead(accesory) turns on when car is on
Hi, thanks for all the videos. Do you know which fuse is for the head lights or frog lights? I want to attach my raptors lights to one of those fuses. Thanks
Hi. I do not think you can tap into a head lamp or fog light through the fuse. The power is always on and it is controlled by a switch/relay so you need to go to the relay. (This is not easy). You can read the underside of the fuse box cover and it will say "FOG FR" where you will see fuse AND relay. For head lamp, look for "H-LP". The proper way is to add your own switch panel. You can tap into "USB" but that will turn on when the car is on (no control to turn off unless car is off).
@@Rav4Gen5 thank you
I want to add some aftermarket interrior lights but I don't want the on during the day so I was thinking to hook it up when the headlights are on. Is this possible? I have the LE model
I think you need to connect to the relay for that, not the fuse. I'll have to double check.
Do i have to install the 7.5 fuse that you removed in the add a fuse slot? So there will be two fuse the add a fuse? One us the original fuse that you removed and the other one us the after market that come with?
Yes. The original fuse is to continue the circuit that was previously there for Toyota. There will be two fuses in the end.
@@Rav4Gen5 Hi there, following the principle, is it correct if I plug the pigtail to unoccupied fuse slot without fuse, then I just only add the aftermarket fuse on the top fuse slot of the pigtail while leaving the bottom fuse slot of pigtail intact ?
The front USB port on my rav4 is not working, and neither are my turn lights, do you know what the fuse labels for them are?
There are fuses labeled usb. Check those.
2:43 - You are wrong. Power is not going up to the wire from right leg.
one of my lights isn't turning on and I think it has to do with this one wire. Any thoughts?
I think all interior lights are connected to one fuse in the cabin fuse box "DOME". Which light does not work and which wire are you referring to?
@@Rav4Gen5 sorry I was referring to my raptor lights. I reached out to the company and they are sending me a new set. I had a problem with the wire that connects to the raptor light.
I will like to know what fuse I need to go on toa Rav4 2021 xle because I do not have ubs fuse
Email me a picture of your fuse cover. You should have USB fuse slots. I would be surprised.
Don't no how to sent the pic
@@Rav4Gen5 I have a 2021 R4P XSE and there are no USB fuses in the engine bay fuse box. I have yet to find a suitable alternative for an accessory fuse tap. Any recommendations?
Where can I buy those exact add a fuse??
See description
Where you got the fuse box that is bolted down?
Hey. Mine came with my switch panel. You can find them on Amazon. It is not bolted down though. Double sided tape. amzn.to/30pULzo
@@Rav4Gen5 hi sir it seems that the link is not the fuse box with switch panel.
Sorry, I thought he meant the fuse. Check out this video for that. czcams.com/video/_d8n3eDgyTo/video.html