Car Parts Getting WORSE! Unboxing Junk!
Vložit
- čas přidán 11. 09. 2024
- The A/C compressor clutch melted and fell apart on this Toyota Van. The repair takes 3.4 hours to complete, after installing a replacement compressor the system did not work. Using a scan tool to manually actuate the clutch, the produced pressures were erratic and incorrect. Junk parts strike again! The whole job has to be done again, time for a new Denso unit!
Support the Channel with a Like and Subscribe and visit www.RainmanRay... for RRR Coffee! And MORE!
Become a Channel Member here on CZcams or visit Patreon at / rainmanraysrepairs to donate and support the channel!
Visit our Second Channel on CZcams, RainmanRay Off Duty / rainmanrayoutoftheshop
Check out our Ray's Auto Clinic Merch HERE: EVERYTHING is a HAMMER! www.RainmanRay...
Wife Unit unveils our custom tumblers and mugs • New Custom Insulated T... also found at www.RainmanRay...
Support the Channel with a Like and Subscribe!
Become a Channel Member here on CZcams or visit Patreon at / rainmanraysrepairs to donate and support the channel!
Visit our Second Channel on CZcams, RainmanRay Off Duty / rainmanrayoutoftheshop
Take a look at my Affiliated Brands and Product Recommendations below:
Interested in Banks Power Performance Products? Visit Banks Power HERE!
**** www.bankspower... *********
Take care of your car or truck with premium synthetic Amsoil Engine Oil and fluids!
Do you perform your own maintenance? Get premium synthetic Amsoil products HERE! ************************ www.amsoil.com... *************************
When it comes to Synthetics, Amsoil is the best in the business! Amsoil backs up their claim with numerous performance testing methods and results can be found at www.amsoil.com...
Visit www.RainmanRaysRepairs.com To have your vehicle serviced at Ray's Auto Clinic in Bradenton Florida where we proudly use Amsoil premium synthetics and other top tier automotive products!
Tool Picks Found on Amazon:
Walnut Blaster Used in this video: amzn.to/3xSdwzq Walnut Sand DE-Carbon Cleaner HTS558 Walnut Blaster
Mountain 5-Piece Metric Double Box Universal Spline Reversible Ratcheting Wrench Set; 8 mm - 18mm, 90 Tooth Design, Long, Flexible, Reversible; MTNRM6 amzn.to/3OJTRp2
As an Amazon Associate I earn from qualifying purchases.
Also, I personally use or have used the products featured in my links and only recommended them if I feel they are of good quality.
#mechanic #repair #autorepair #restoration #wifeunit #brakecleanmafia
ABOUT OUR CHANNEL
Our channel is about general automotive repair and maintenance . We cover a large variety of automotive services and repairs in a privately owned independent shop.
Check out our channel here:
/ @rainmanraysrepairs
and the Off Duty Channel here: RainmanRay Off Duty / rainmanrayoutoftheshop
Don’t forget to subscribe and share!
”Intro Music by Karl Casey @ White Bat Audio”
Thanks to Jesse for making the intro and graphic for us to enjoy!!
This customer should just pay you to do their oil changes and not go to the dealer at all.
My uncle once brought his car to my brother, a master mechanic, with air conditioning issues. After looking at it, my brother told him the job would be a complete system replacement because the compressor had shed many metal fragments from the inside when it gave up. My uncle was unhappy with the estimate and took his car to another shop for a second opinion. The other shop said compressor replacement and recharge system only. Of course, that price was much more appealing, so he had the other shop do the job.
Not even a week later, the brand-new compressor seized up and quit too, because it was full of the metal shavings from the previous compressor. Oopsy! And for some reason, my uncle was angry with my brother.
Moral of the story? When a family member and a master mechanic tells you what the job is, believe them.
True as can be IF the compressor itself fails. In this vans case though, it only looked like the clutch failed, which means you don't have to replace everything. Ray really should have taken off the old clutch after removing the compressor and checked that the compressor piston hadn't locked/blown up before just dropping in the new one.
On older cars (like 1980's) you could just use a pressured chemical mix to flush out the system to get all the metal shavings out, but nowadays the ac condenser units have such narrow passages that it may not work to get it all out, plus you still had to replace all the little filters and evaporators.
If I were your brother, I would never give car advice to that uncle ever again. "Go take it to that shop that did such a good job with your A/C compressor!" 🤣
@@LiveFreeOrDieDH My uncle is no longer with us. From the day of that event until he died, my uncle never took his car to my brother again. Sadly, some people are incapable of admitting they are wrong.
My days as a Pepsi service tech working on fountain units I learned the hard way using pocket screwdriver taking the small o rings off. Bought a dental pick to use on the orings. Saved my finger tips.
Yeah, I use plastic dental picks too.
Same, it only took one nice placed stabby stab to look for alternatives. My goto pick it the one with the U-hook on one side & the V on the other.
They make oring pliers
Do the parts rebuilders reimburse for labor? What a PITA!
Dealership don't troubleshoot what parts is actually needs to be replaced, they just replace everything. That is why I don't like to take my vehicle to the dealership. The free changes are only to get you in for be able to up sell you for additional service.
I just bought a new Toyota Corolla and I will not be taking it for the free oil changes, because I am not going to do the 10,000 mile intervals for the oil changes. So I have to special order the 0w-8 oil for it, so I can have it changed at 5,000 miles.
I agree, Lexus recommends 10,000 mile oil changes, which is crazy, I use Mobil One and chg. every 5000 miles...
My brother bought a new corolla, he got the toyocare service program…..they want to change the oil at 10,000… he changes at 5000. So he pays 120.00 for the extra oil change at the dealer, why i have no idea. They claim it would void warranty…………but i call shenanigans on that…
I put over 300K on a eover bored 327. Drydene oil and Filter every 3K miles per rebuilder's advice, oil is your best friend.
Funny thing about those "free" oil changes with Toyota cars is that you paid about $2000 for a lifetime maintenance contract. Had you had no intention of using it, you should have had them cancel the contract and save you some money.
All my Fords have 10k mile oil changes. At 10k. They get 5W20 synthetic blend & Motorcraft filter. Both of my 2014s have 200k trouble free miles. None have any engine issues, or sludge.
When a manufacturer & oil company say their engine is safe for 10k mile oil changes, they mean it. Changing it early is not a flex. Just means you like to flush money away.
Like you have said, “just because it’s new, doesn’t mean it’s good”. How frustrating.
I believe it was a remanufactured compressor.
Also, "Dorman" parts are NOT known for STELLAR quality! I would have opted for a GENUINE Toyota "certified" replacement. There is TOO MUCH labor involved to take a chance on "generic" parts quality.
@@TheOzthewizDorman doesn't make compressors and neither does Toyota.
It wasnt a new compressor. It was remanufactured junk
A friend of mine used to have her oil changes done at a local dealer. Every time she did, they presented her with a list of things that needed her attention (and money), usually costing somewhere in the 500-600 dollar range. Each time, the list was different, and when she had me check out their suggestions, most of them were very minor cures - gasket, seal, new hose, etc. Once they told her the rear brakes had to be replaced - pads, calipers, rotors, of course. Funny thing - I had replaced the pads and rotors just a few weeks earlier, and the calipers had no signs of distress - no leaks, no binding, okay to continue. They simply thought that because of its mileage it must be ready for brakes - they never looked at them. Deailers maintenance writers are prone to do that, and sadly, mostly to women, who they think are not knowledgeable enough to question them.
That's why women buy new cars.
@@shadetreemech290 It's not a "women" thing, it's an uneducated vehicle owner thing.
Though the prevalence of male salespeople taking advantage of female buyers lends some power to your comment.
How to you expect to pay all the dead weight on two legs,the taxes,the insurance, the inventory of parts, and service equipment,the office staff,and the vehicle inventory loans from the bank if YOU DON'T screw so many people over every single day?
How many of you don't know what the nut is for even a small dealership? It's ridiculous,believe me- I did the books
Damned few vehicle repair shops are honest,because you will bankrupt your self trying
What do you think that scanner from Snap ON cost? ALL scanners and all service data has to be paid for every year.THOUSANDS of Dollars
Think HARD before you think about opening your own shop,you are going to work WAY more than 40 hours with vacations and benefits paid by you
Just watching you find all the connections and parts that have to be removed before you can access the actual defective part convinces me why these repairs are so expensive.
When it comes to AC compressors for Toyota/Lexus vehicles, I never stray from my time-tested 3-letter mantra: "OEM".
That's any vehicle. Reman compressors only exist to get a vehicle working to sell it or get a no warranty repair done. Always OE on compressors.
@@cup_and_cone The owners will be doing the repair again in a year or so....my older lex had one of these black chinesium compressors. leaked from main seal and around high/low pressure plate. So got it a Denso OEM!!
Just went through this on my daughter's car. 2 "rebuilt" NAPA compressors after the stock unit locked up and broke the belt. Finally spent the money on a brand new unit. Evaced everything and replaced valves just to be on the safe side.
I've had NAPA compressor clutch crack and fall off so I don't buy anything from NAPA, JUNK.
NAPA buys the same junk as Autozone, Advance, Oreilly, etc. They're all aftermarket and rebuilt part providers. No one should be surprised this stuff is junk.
Last week I did a new compressor on a gmc Kodiak. It lasted to the end of the street when the customer drove it off my lot.
NAPA sells 3 grades of compressors based on your budget and how long you plan on keeping your vehicle. "Rebuilt" like you bought is the least expensive because the rebuilder just replaced the components of a failed compressor and that's it so it has a 1 year warranty The next level up is "Remanufactured", these are compressors that have had a complete replacement of all of the internals, electronics and clutch assembly replaced and comes with a 3 year warranty. New is also available and comes with a lifetime warranty. I have learned long ago the difference in price for a "rebuilt" isn't worth it when for a little bit more you can buy a "remanufactured" and have not had any issues. So to say NAPA parts are junk is not accurate in my opinion is inaccurate. We use NAPA almost exclusively and the reason for that is we very rarely have comebacks due to faulty parts, unlike Ray we don't Love our job so much we "don't" like doing it twice.
I remembered when you could sit on the fender inside the engine to work on it. Or so, those were the days
Still can. Full size Silverado 1500 with the V6 or the small (4.8) V8.
Excuse you Ray?? You're the one inside the TV sir!! Lmaoooo
Jokes aside, I enjoy your channel bud. Keep up the good work and being an honest person.
Give it a decade or two, and we will have Smell-avision and Feel-avision 😂
In Soviet Russia, the TV is inside you!
But please try using both hands. get a head mounted camera please.
Ray, you caused me to buy that stubby impact gun last week. thanks, buddy, you saved this arthritic old man a lot of pain.
I find all the battery pack Electric(tron) guns facinating as we DID not have this type of thing, 'Back in the Day'
I have the same “problem”. Almost every time I watch I see another tool or set that I just GOTTA HAVE. And I can’t even do this kind of work anymore due to spinal damage.
It is amazing that any repairs can be accomplished when you can't see what you are working on and have to contort yourself to reach endless fasteners, sensors, etc. Not only does this work require experience, skill, and integrity, patience is a clear asset as well. Nicely done.
Auto techs need to "see" what were doing in our mind, since there's no way to actually see it with our eyes. Work by feel and the image in our head.
Eric O gets his best pats from the junkyard
Dave and I had a similar discussion on junkyard parts, in 10 years we will have to go full mad max to fix anything
@@RainmanRaysRepairs "Witness corporate greed!!!" (suited CFO huffs silver spraypaint)
He does like Wilbert's.
@@RainmanRaysRepairs while it sounds impossible....most of the parts today are made in the " aether " they do NOT come out of a Factory ......
that is reality .... Can you except the truth ? probably not......but it is the Truth...... Jay Fox
@@RainmanRaysRepairs junk yard parts are often times more $$ that after market or even new . sometimes though you need unobtanium and the yard and the $ have to happen
I am always amazed at your knowledge of what needs to be done to reach the problem that you also have the knowledge to repair.
Yayy it’s Ray..sadly with more junk parts. Not shocking everything is coming in broken.
Post flu world. Just pump out stuff to make up the lost money, who cares if it’s crap.
junk parts cause Ray rant.
Mechanic and retirement job at NAPA. We moved alot of parts (300k a month) mostly wholesale. Not a big rebuilt person. For ac compressors,alternators, and starters, I only buy new. Some shops return parts as new but try to bs us with used parts in the box hoping we won't check . We check everything returned now.
Yep, that's what a reliable parts supplier does.
I had a 14 Sienna that the compressor died on, and I was quoted 3k for the repair. It was essentially the same issue as the one you've got, except not as bad, it happened at 160k miles. The compressor alone was 700 dollars, although I spring for the Denso. The real issue with A/C work is that most people can DiY stuff but trying to evacuate, vacuum, change parts, and recharge is outside of most peoples ability just from an equipment standpoint. I was lucky and knew a guy that had a machine which meant I was just on the hook for the compressor and refrigerant, and it still cost me about 1k. I can remember changing the compressor on my first car way back when and it was only a couple hundred dollars for compressor and parts as well as refrigerant. The average American is rapidly being engineered and priced out of repairing things for themselves. I also found it easier to remove passenger tire and splash guard. Was way easier than trying to do it from the top.
That was my thought exactly, why not remove tire and go through Fender Well.
Lucky Honda made me paid $980 for the compressor only all total cost $1800 in Honda Civic EX 2002 with 14k yeah dead A/C compressor at 14k . and I have to go 4 times at Honda couldn't find the A/C leak I have to tell them their job they have all tools I did found the leak on the top Aluminium pipe and they lost my red battery cap on the two Honda cars I wonder if they replaced all bolts in the process seem missing bolts each time you go to the dealer something obviously will be missing after a job in your engine
I hate dealer I always will they are so fake. got to find an independent Honda Mechanic from now. I bought a new Subaru i'm nervous to bring it for repair later on at the Subaru dealer I don't trust them.
System self-evacuates when you disconnect a line. Vac pumps are cheap, as are a set of manifold guages. Anyone motivated enough will get it done, except for the evaporator. Either it leaks slow enough you charge it once a year or so, or it just doesn't get fixed at all. 99% of people aren't pulling the dash, or paying to have it done.
@@GrandPrix46 True enough about the self-evacuation...though arguably that's already a _leak,_ so there's that...also, most people aren't gonna do that because the refrigerant is petty nasty/toxic to breathe _and_ it's illegal on the federal level (here in the US, anyway, not sure about other countries) to intentionally evacuate it into the air instead of a recovery tank, so there's an element of "I may be crazy enough to fight the Batman, but the IRS?! Nooooo, thank you!" to it, too.
The issue is that if just the clutch fails, you only really need to replace the compressor (or just the clutch), but if the compressor fails, it shreds bits of metal throughout the system and if you don't replace the condenser, all the other little filters and evaporator and flush all the lines before putting all those new parts in, your new compressor will fail within a year, usually within a month, because the metal shavings will tear up the new one.
As a old guy watching power tools make a repair a lot easier,in my days it was wrenching and when ratchets and sockets appeared it was a big good thing, battery operated tools zip off parts so easy, anyway great watching you Ray ; you do make things look easy , knowledge and liking what you do is key .😊
Retired mechanic here from 🇭🇲 love watching your segments, cars are way different as are your workings tool and well everything, I find it really interesting.
As someone who has never owned a car that has even had a ODB connector I find it interesting to see how much it influences the work on cars. It's also sort of jarring to hear things such as a carburetor being hard to adjust or that using a stroboscope light to adjust the timing. These are things I learned to do as a kid. They were natural to me and things like fuel injection and electronic ignition timing is strange and hard to work with. To me even electric fuel pumps feels weird. The cars I used to work with had mechanical fuel pumps. There were nothing electric to them.
But to be honest I have seen some things that tells me that the reliability has actually increased compared to cars of say thirty years past. Back then there were a lot more common to see someone at the shoulder of the road with a car that just gave up on them. ON a longer drive you would almost always see a few stuck at the side of the road waiting for help.
Another things is looking at parking lots. thirty or forty years back there were always patches of oil slicks at a parking lot. Cars leaked oil. If it didn't leak then it was out of oil. This has changed a lot. Both the dimension precision in manufacturing and the materials used has improved a lot. There's nothing to argue about that.
But we've also bought a new set of problems with the technical improvements. Modern electronics is pretty rugged if designed to be so. And yet we have systems that are so complex and rely on so many sensors that it getts hard to make sense of what is happening at times. And if the sensors and all wires are working there is the software that can do strange things. It's not very common but it's also way beyond what any technician can be supposed to solve without just replacing the controller.
Yes I'm mystifying the computer systems in modern cars, but they are largely black boxes with little to no real access to the software in them. And as a computer tech that makes them feel dangerous to me.
Old cars were really simple. Everything was so simple to understand. It was mechanical links and normal electrical switches.
Yes.
In the Olden Days we would have replaced just the clutch. The compressor itself is probably ok. We also would rebuild alternators, generators, starters, steering gears, master cylinders, etc. rather than change out complete assemblies.
But, hey! That was then, this is now. The parts for rebuilding these assemblies probably can't be obtained by the independent mechanic these days.
Yeah,what happened to the days when a shifter and a screwdriver could keep your car runnung.
Hi Rainman, yea, 2 months ago I put a $120 fuel pump in a daughter’s 2001 Tahoe. She called the next day. No joy. I went to her site, banged on the tank and vroooom. I removed the $120 pump and installed a $300 pump. No problems since. Secondly, 3 weeks ago I replaced coils and an ignition control module in another daughter’s car, Saturn Ion. Brand name parts. It ran worse than prior to the new parts. After research I went to a junk yard and found an oem icm. On the back side it said Made In USA. Yup, that worked. This is nuts. Dave in Omaha
Haha I went through that with a blazer many years back! Saved $100 and had to do the job 3 times because the AutoZone pump failed twice. Learned the hard way
really sucks Ray. I'm a long way from a mechanic, but I've had more than my share of defective "new" parts. Fuel pumps, altenators and even bent struts out of the box. Of course I didn't realize they were bent until after I installed 'em.
Lots of folks on here warn about using aftermarket parts (especially Chinese) in Toyotas, in particular O2 sensors and cat converters. So, we can add AC compressors to the list.
So, you waste 3.4 hours on the job that you can't ethically charge the customer for. Does the parts supplier reimburse you for the lost time? I really doubt that they do.
Today I began replacing my 08 5.4. 3 valve in my elongated expedition with a new generation coyote.
Wish me patience and luck 🙏
Sounds like a real project. Will it bolt up to the 6R80? Do you have to change the wiring and computer?
As soon as you extracted the old compressor and I saw the green label and black paint I knew it was a rebuilt replacement. When I saw the new one in your hand, also painted black with the green label, I shook my head. I learned my lesson years ago, NO REBUILT COMPRESSORS! I try to get Denso when I can, even though they seem to be scarce these days. Even the China clones are better than rebuilt.
ive had nothing but good experiences with random compressors for under 200$
Agree, no aftermarket or rebuilt. Genuine or Original Equipment ONLY. It's simply not worth the hassle.
I have also had bad experiences with rebuilt compressors. I also stick with Denso compressors. Denson is what the original manufacturer uses on their vehicles. I have GM vehicles and Denso is who makes their compressors. I had to replace my compressor a year ago on my 2004 Suburban and wanted a NEW Original GM Part and it was a Acdelco part made by Denso but really expensive since it had the Acdelco label on it. So I just bought the Original Denso part without Acdelco label on it where it was more affordable and does the same job with the same liability of an oem part because it is an oem part just labeled different from the actual company who makes it. To today, it works flawlessly. I live in AZ where we use our A/C almost all the time.
Yes Denso is in the Toyota group of companies on paper they own 25% of Denso. Denso is always the first choice but if customer has a budget UAC makes great brand new compressors
UAC makes great brand new compressors if someone has a budget
Way back in 1986, I was home on leave in NC from the Navy. I had a '79 Ford Mustang I'd bought brand new. It didn't have cruise control on it from the factory, so I took it to an area Sears Automotive to have an aftermarket cruise control put on it. This was in the latter part of October, when it was already past A/C season in NC and where I was stationed.
The cruise control actually worked quite well. But come the next summer, for some reason, my A/C wouldn't turn on. As in, the compressor wouldn't do anything. Plenty of freon in the system, but no voltage to the compressor clutch when I turned it on.
Long story short, I ended up getting the wiring diagrams at the base library, did some looking under the dash, and found out that the Sears mechanic that had installed the cruise control, instead of splicing into the wire, had completely cut the power wire to the compressor clutch, and connected it to the cruise control instead.
Sears got me automatically.
@@orasmiller1273Sears, was at one time, Tha largest retailer in the world...!
How frustrating! Nothing like having to do a job twice, especially when it had nothing to do with your work. Two hours of your life you can’t get back! Your attitude is great though Ray. You’re an inspiration. If it were me there would be so many bad words spewed the video would not be able to be shown. Keep up the good work and patience!
Worse, its 2 hours of shop time that is basically "Time Theft" due to faulty parts supplied. (Pretty sure if this happened to a LAWYER(Faulty Paperwork) he/she would bill someone for it anyways? Hmmm can you BILL the parts supplier for 'Shop time' when its due to faulty parts? Theres a thought?)
@@Streamer687 Some parts stores give an extra discount for factory failed so as not to lose the regular customer - one account was closed when two gas tanks in a row leaked & almost another after a rebuilt head failed till 20% was discounted on the second head
@@Streamer687no need to be so melodramatic. All Ray has to do is call the manager of his parts supplier & get a discount arranged for the replacement part or submit his labor claim.
Ray. Thanks for not only being an honest mechanic (most probably are when allowed) but also teaching us how to properly do things. You sir, are awesome. Semper Fi.
Dealerships don't have mechanics. They have parts changers. Their computer tells them what part to change
Indeed. N real mechanics but novice ones or you can hire them from the street and change parts to.😁😁😁😁
Their quota tells them what part to change!
That was the whole point of putting larger computer systems in vehicles. No need for mechanics who can tell you what's wrong just by hearing it idle.
"Load the parts cannons!"
- "Loaded!"
"FIRE"
Flat rate.
I forgot about the title, and once you plugged the new compressor up and located the thermo fans I'm thinking "wouldn't it make sense to charge it and verify that compressor is working correctly before you button everything up?" And then after you button everything up, charge it, and jump back in the cab it's "uh-oh"
Remember Ray, "just because it's new, doesn't mean it's good"
I learned that little gem from you 😂
Its always best practice to prove refrigerant condition using a refrigerant diagnostic sight glass in instances like this. The previous shop quoted for an entire system replacement possibly due to contamination of refrigerant due to compressor failure. The reaaon your getting an error code is most likely swarf has entered the vdc solenoid which uses a pwm signal to control the swashplate.
If you were to open the failed compressor and observe grey aluminium paste mixed with oil this would prove this failure.
You can also use a picoscope to determine if solenoid itself is just at fault which can be replaced alone without compressor change.
Also always measure oil quantity in compressor matches specified volume before compressor installation.
There's a hole in that pulley you can put a screw driver/whatever in that will hold it in place. Easy to access through the wheelwell.
You would think the owner might come to the realization that "free" oil changes are very expensive. My new 2016 Highlander came with "free" service, I opted to get oil changes elsewhere at 5,000 mile intervals vs. Toyota's recommended 10,000 miles. After retirement, I now do them myself.
I went to Toyota dealership wanted an oil change between their free oil changes at 10k oil changes and said I was wasting my money. I said change the oil anyway
BMW dealer told me the same and their interval is 12k miles. Absolutely ridiculous.
I got a bad Denso compressor last year. Installed it and it was SUPER noisy. Had to pull it all back apart and swap it out.
Happens, but you chances are WAY better with OE parts.
Next time I drive to south Florida,I’ll get an appointment with Ray to check out my car and get an oil change at least with Amsoil.
I'm 47yrs old. $73,000 biweekly and I'm retired, this video have inspired me greatly in many ways that I remember my past of how I struggled with many things in life to be where I am today!!!!❤️
I'm inspired.
Please spill some sugar about the biweekly returns, I would be really glad
All thanks to Christina Ann Tucker
After I raised up to 325k trading with her I bought a new House and a car here in the states 🇺🇸🇺🇸 also paid for my daughter's surgery (Joey). Glory to God.shalom.
I really need assistance
How do I reach her???
There is her line!!!! under this comment!!!!👍🏻👍🏻👍🏻🔁
The 1980's seemed when dealerships started phasing out the top mechanics, but today's world is just crazy, I had some body work done at the dealership and I knew more then they did on the parts and how to find schematics what was needed.
Dealers have always had problems keeping good trained mechanics. They always seemed to leave and start their own garages to make a lot more money and have independence over their work. I guess that's pretty much what drove Ray to have his own place.
After seeing all the death-struggle procedures to get to the AC compressors on your channel, I was pleased to find there are access holes through the structure to unbolt the compressor on my Tacoma.
depends on what you're working on, some are hell to get at, some are easy
We just got the tail end of Ernesto up here in Newfoundland Canada. We didn’t get much wind, but it brought some heavy rain and humidity. I was painting a room yesterday and had to turn on a dehumidifier to get it to dry. It was 94%. Gross.
Glad you guys are getting a heat break.
Did Ernesto stop the Oak Island crew from finding another potential clue? That's all they ever find.
@@clbcl5 different province, not sure how they were affected. But yes very likely. Standard discovery/history channel BS.
It is 8% here. But it is a desert.
Good to see another Newfie following Ray. How's life on the rock these days? Sorry that you're suffering with the humidity. Wasn't much better over here in Toronto until yesterday. We're currently at 55%
@@proudcanadian5713 hey brother. The rock is pretty much same old, same old. Humidity is down today for the most part.
Yeah, you guys had your own issues with the floods and tornadoes in the last little bit too. Glad it’s subsiding.
That compressor is still in better shape than the one that I pulled from our 02 Grand Caravan 😂 It had started making noise, and I discovered it had lost a third of it's bearings! That was a miserable job after returning from a long weekend camping trip with no AC!
Sanden unit? They had a warranty enhancement going for a while. Sure it has long ended now.
Fwd are a pita
Nice to hear and see a non electron ratchet being used to together with with the rymthnic thump of knuckles on hard surface in restricted spaces.... memories 😂
Working on equipment related to oilfield operations we constantly changed orings to the tune of ordering quantities of 1000 at a time of various sizes. We were required to use brass removal tools. The orings were mounted on stainless steel. The thought was if you looked at the groove under a microscope you could see scratches. Take it we were dealing with up to 30,000 psi.
Again you have proven that even Master Technicians can be defeated by either faulty parts or gremlins in the system. It is no reflection of you diagnostic or skill set...sometimes poop happens that is out of our control. I am sure it is very humbling for you to post these types of videos, but that is what makes you a step above the rest. You could have just uploaded a perfect repair and none of us viewers would have noticed. Instead you uploaded a repair video gone wrong. That is what makes me, for one, and I feel you viewers, respect you and your honesty. Keep on rocking Ray!!! All of us have one of those days!!!
Agreed - new parts stink. I remember changing only the clutch when the compressor was still good. Saved sucking and recharging as well as the cost of a complete compressor. That was when the compressor was on top of the engine.
Thanks.
I discovered long ago. It was actually cheaper and more convenient to buy factory parts. With my tiny cash only wholesale accounts
Replacing Toyota ac compressors should replace break dancing (brake dancing?) as an Olympic sport.
Just move to Australia and Identify as a woman, you too can be an olympic break dancer.
I'd rather replace a Toyota compressor than a Nissan (well, Datsun) alternator. Damn built-in voltage regulator!
Raygun?
It seems like it's hard to find honest mechanics nowadays. love watching your vids and how you save ppl from the bad apples.
In Florida it is darn near impossible.
Why do customers return to a place that has tried to cheat them in the past, regardless if they get a "free" oil change or not? smh.
Haven't seen a Clutch Blown up like that before Thanks for Sharing Raymond That is crazy 16:00 @Rainman Ray's Repairs
Yes, Ray, everything we buy anymore is pretty much junk. I used to get years out of incandescent bulbs in my cars and home, and now I am lucky to get more than a week or two. I do believe it's all intentional.
Call capitalism GREED will get worst if Trump is elected who knows
@DanielField2023 Sorry, no. It's called globalism, and Trump has nothing to do with it.
@@DanielField2023 get rid of your lobbies
@@DanielField2023you are as stup.d as the day is long. With your brain being wired as it is why are you watching this channel?
I love it when you show the original damaged part failure. It’s the “thars your problem”.
I had a Dodge/Chrysler mini van I let my niece/nephew in law drive. It developed a “belt whine”.
Nephew in law sprayed “belt grip” when I wasn’t around. Whine remained, but reduced. Then the one winter night in AK, crossing an area with spotty cell service it threw the belt. Towed it to me.
I pulled/cut the belt, water pump was toast. New belt, new WP, new coolant. Fire it up. Went for test drive, WP working held temp but still a whine.
It was an idler.
Went to get a temp sensor a couple weeks back. They handed me the $100 part, I opened the new box on a bad part. This was a part sent from the "warehouse" that was a returned item. Nobody looked at the return part. The part was oily and well used. The counter 0erson still tried to send it with me.
For sensors, water pumps, fuel pumps, hard to replace parts, etc......always use OEM factory parts.
I was in parts for 25 years or so. One day I discovered I could mute the phone and still listen to the people on the line. They got to talking about scamming a jobber of ours by keeping a new cam shaft and returning the old one. I prompting called our jobbers and explained the situation. They were very pleased, the jobber, to have that information. It didn't end well for the customer.
I had to pay for a new radiator because the tech smashed the plastic when removing the fan on my 528i... oh but it was "leaking" strange because it never leaked on me, it needed the thermostat replaced. never went back to that shop!, sadly they specialized on Eur cars... but NOT MINE!!!
Why a new denso compressor isn’t being installed is really the question. Those rebuilt units that are all spray painted black are the biggest pieces of junk you can install in anyone’s car
Good old dealerships are just Stealerships not diagnosing anything Just say it needs everything to make the most money 1:00 @Rainman Ray's Repair
Kudos for taking good care of your customer, Ray... especially while working in that heat. I don't think I could handle working in those temps all day!!
Yup. New compressor is more better. I replaced mine with a brand new AC Delco ( only 100.00 more) it's lasted 5 years and still works like new. A little noisy but only at start up. A rebuilt would have only lasted at best 2 years. Good work Ray. I still suggest a piece of cardboard over the radiator though
G'day Ray. As an old fart that has been playing mechanic for 55 yrs I watch a lot of mechanics on u tube and have noticed one main thing. Years ago a component would not have a label left on it because it had been in service for so long the label had disintergrated due to age. It seems nowdays the labels appear that they are no more than 3 years old. That prooves it. Cheap crap at expensive prices to make profit for the big companies. Screw the consumer.
So hard to get what you payed for these days, after spending 3k over three years at three different shops my ac still didn't work and none of them accepting any responsibility,I ended up buying All the AC gear and doing it myself,new parts gassed up still working great 4years later.they Will never get another red cent from me or my friends.
Ray! It's too hot in sw florida. Put a few minisplits in your shop and close those doors. Your workers will love you
Never seen a condenser tampon before...you learn something new every video. Thanks Ray
I think you may be right about there being two issues. I hope you update us on this!
I just had a similar problem with a 2013 Mazda 3. They replaced the Compressor, serviced the system and it worked GREAT -- for 2.5 weeks. Then as I was driving home on the highway, the vehicle had a shudder in the steering wheel and the A/C stopped blowing cold air. When I turned A/C off, the shudder disappeared. Took it back to my guys and yep they had to put another compressor in it. I felt sorry for them because it's not THEIR fault. What the heck has happened to Quality Control in manufacturing nowadays?
It's just control No quality these days.
Ray if you just install an oem Denso compressor you may be one step ahead ,that thermal expansion valve may be clogged like you said. (Ray have a better day tomorrow)
I was wondering if the clutch busted because the compressor piston locked up and shredded itself. He should have checked the old compressor to see, because that would mean several other parts would need to be replaced after flushing all the lines out to remove metal bits. IMO, Ray was slacking.
@@ColeSlothIf the system was contaminated there would be metal on the desiccant filter he replaced.
Great video as ways Raymond Things happen We tend to get crappy parts 98 percent more then good parts I'm sure you will get it fixed 42:00 @Rainman Ray's Repairs
You do a great job at filming your work. It adds time to your task I am sure
Can you make a video of you installing the new new compressor just so we can see if that fixes the problem. It would be awesome. Thank you.
The A/C Compressor started leaking PAG oil/refrigerant (but still working good - not for long) in my 2016 KИ Forte.
The dealership replaced it with a "new" Compressor for free - a rebuilt unit from South Korea.
That was 3 years ago; the rebuilt Compressor is still working flawlessly. 🙂👍🤞
DENSO First Time Fit® A/C compressors are manufactured and tested to the strictest OE standards for unparalleled performance
Stayed tuned! Part 2 in the making!
Usually when I see this. The expansion valve/metering valve has debris in it. Or clogged condenser or evap coil too.
This summer the dealer told me my rear brakes needed replaced because they were worn down. 45 days later I go to get my annual inspection and have them check the rear brakes to estimate how much it would cost to replace them. The mechanic comes back and tells me my brakes have plenty of pad and that they were just fine. So which one is lying to me. Dealers are so dishonest these days just to make a buck and again there is that one honest one. Ray must have been on duty that day. ❤
I'd always be suspicious of "rear brakes worn" diagnosis. They don't do much, should take a long time to wear out.
As someone who drives 50k a year, I learned a decade ago that when you own a Toyota or Honda you always need to use oem parts because aftermarket stuff will die 3-4 times before the rest of the car dies lol
Hey Ray we're not inside the TV...we're inside the go pro...get your borescope... we're here!🙃
I understand completely-Ry. Where does this junk come from? Is there NO quality control/check off's. I'm working on a little tractor now-have replaced three plastic-foreign made fuel pumps-got one to finally work for 30 minutes. Going to get a kit and try to rebuild the old metal body one. What a waste!!
Welcoming back!
Oh for the days that you could replace the clutch pak on the compressor . Well as they have modularize equipment , it is probably cheaper to replace the whole unit now. Stay safe, have fun .
Speaking of crappy parts. I replaced an O2 sensor on a 1998 Fiat Brava. The car ran great for a few months and then the misfires started drinking petrol. Check all the usual suspects no error codes. It turned out the non oem O2 sensor went bad, a oem Bosch from the scrapyard and all the problems disappeared straight way. Lesson learned
Had problems with flow sensors on 2 aftermarket compressors last month. Put a magnet on the sensors and they "woke up". Pulled the junk compressors and replace with Toyota oem units.
Ouch! When stuff like that happens it hurts! Do want to see the temp o meter blowing cold on that one when it's done tho!
working in that heat would be a tough thing to get used to.
It's 9°c here in Northern Ireland apparently it's global boiling 😮😮😮
The "warmers" thought they could do the "boiled frog" move on us........but it didnt work !!!!!!!!!! LOL
Just had the exact same problem with a Suburban the other day. Both pressures were too high after a fairly recent compressor replacement, but the charge weight was spot on. Customer declined repair, so I can't give a confirmed kill on that, Since everything looked great on data, and all the voltages I could reach with it running looked good, I concluded it was an internal compressor problem. May never know, but, yeah, parts seem to be getting worse.
Always enjoy seeing you being a good person & saving people from people who use what is wrong & Use itas a way to cash in!!! You sir are a good person & should sleep well at night because of that !!!!
bad compressor ? ... my impression is that components are not being tested like they used to be. it happens in business too - introducing programs and processes that they have not tested in real terms - back in my day when I faced this I would use the term "there is a reason this was stopped in the past, but no one can recall so we are going to do it again and cross our fingers that reason is no longer a factor". I am very curious on how this ends up as that was a ton of work to have to redo - frustrating for sure.
I just had to replace my compressor two months ago and went through three different compressors before finally getting one that worked. The first one the clutch was out of alignment so it burnt up within 10 minutes, the second one the clutch just stop working altogether about 30 minutes in and finally the third one is hanging in there. Parts are just completely awful these days. Especially when you're paying $1,000+ just for the compressor, that is completely unacceptable.
Times I've seen the pressures act like that was because the orifice tube or expansion valve were plugged with debris.
The shop I worked at (recently retired), we would only use NEW compressors, or none at all. Had WAY too many problems with "rebuilt" compressors.
Bill that short video of Billy and Molly at the end is what got me watching your channel. Pretty cool to see the 55' coming full circle. Will be sharp!
Very interesting problem; can't wait to see the solution.
I live in Australia, and I had the AC compressor replaced in my 2014 Subaru Forester 2.5 last year; the total was $1406.45 Aussie dollars ($946.70 US dollars)
I believe you when you said it was blowing hot. Right now it’s 72 outside with about 40% humidity here in Olmsted Falls,OH
Dave as in member of the Rainman mechanic family. He was playing some chill music in one video.
Find a long pair of hemostats. They are great for removing things from holes.
I hope you can provide an update on this repair later on.
I purchased four new brake calipers for my 2007 Honda Civic Si from O'Reilly's Auto Parts. Upon installation and subsequent bleeding of the brake lines, the seals and pistons of the calipers failed, resulting in brake fluid leakage. I returned the defective calipers and obtained replacements, only to encounter the same issue. After experiencing this problem three times, I decided to purchase genuine Honda calipers, which functioned properly.
It would be nice to know if a another new compressor finally fixed the problem or if it was something else.
Parts are terrible now. Had to have ac compressor installed in my sons car at college. Local shop had to go through 3 compressors before found one that worked.
Check and see if there is a strainer in the liquid line before the expansion valve. It could be plugged up.
Literally had to do this on my sisters truck tonight. The screen was clogged like packed full of debris.
Why are you using a reman compressor here? This compressor looks like a reman 4 seasons compressor, commonly refered to the 4 seasons black compressor of death. I would have just went with an OEM denso compressor here. I know there is quite a price difference here between the reman comressor and the oem denso compressor. Great work!
I really wish there was a tool that could depress the tab and separate electrical connections. with the various style, probably 4-5 different ones, but could be small enough to operate one handed.
Should have used an OEM part, learned my lesson over the years. As a shadetree I got tired of doing things twice, in business you have lost money on the job. My friend has a top notch garage and in some cases depending on the labor he'll refuse service if the customer wants cheap, fuel pumps come to mind.
In the early '80s I had a '70 Volvo. Its mechanical fuel pump died at 125k. Picked up a new one at my favorite parts store. That one broke after 12 miles. Took it back and got another one. It broke after 4 miles. Got a third one (still no charge) and went to the dealer for a "real" one. Replaced the third one a year later because I was tired of carrying a replacement part in the trunk.