Not A Glock 20 10mm Polymer 80 - Part IV
Vložit
- čas přidán 6. 08. 2020
- Hey all, I appreciate the likes and subscribes! Keep them coming so I can keep making videos! This channel is 100% self-funded right now, so it's all for the likes and subscribes! And kicks and giggles.
Where are Part I and II? - You Tube, in its obfuscating, prejudicial way removed them. "Your content was removed due to a violation of our Community Guidelines. " The guidelines referenced: support.google.com/youtube/an... - You'll note these videos did not in any way violate those policies, but they have a sneaky "Please note this is not a complete list." Oh, OK. If you don't list the rules, you can make them up as you go, right? They rejected my appeals with no clarification given. You can find Part I & II on my Rumble channel: rumble.com/c/SevenStarTactical
Reduced power Glock Spring set - www.ndzperformance.com/NDZ-RP...
The American Suppressor Association. You should join, because cans not bans. Also, they are having another give away for members! I like suppressors, and so do my ears! And my wife, she likes them too. - americansuppressorassociation...
#Polymer80 #Glock #10mm - Zábava
you need to adjust your rails on the frame p80 are notorious for that. and 17lb spring before you wreck your build. also a polish on slide and rails would help as well
I would say you need a stronger spring than a weaker one. And a good ol feed ramp polish would probably clear that right up. But I’m no expert. I’m new to the Glock building.
I went to the 24 pound recoil spring and it fixed my feeding issues do to having an rmr on the slide
22 pound spring in mine, it runs like a top
If your striker issue was slowing down the slide lock up (that partialy cocks the striker), you might actually need the 17lb spring for the weak ammo.
15lb didn't have enough juice to chamber when you slingshot it so half of the video I was saying "go back to 17 just to see what happens".
I'd try polishing the feed ramp and chamber.
Your barrel has to float a little bit and its so tight it wont let the barrel angle up to feed
Awesome stuff!
@@SevenStarTactical
Thanks to you bringing awesome content like this out - I'm glad 10mm is coming back with a vengeance!
Its that tight ass barrel fitment
Overall, would you recommend the P80 frame in combination with an OEM stock Glock 20 slide assembly?
@SevenStar Tactical Thanks for the input. 👍🏽
Polish feed ramp and try the 20lb spring
This is similar to my current build
I would say a heavier spring since it seems to have issues going into battery. Maybe the weight of the red dot is making a difference? Maybe take it off and see if it changes anything.
20 lb spring
So I'm having the same failure with the same frequency. I'm gonna have to try some hot 🔥 stuff I liked the reliability you had with the underwood. My local store hardly have any 10mm so I jumped on some Barnes hp but they are only traveling at 1150 at 180gn
At this point I shoot 100% reloads that are 200 gr hard cast bullets loaded to 1200+ fps. Haven't had any issues. I guess at some point I should buy a box of weak factory ammo and see if it works now. 🤣
I don't remember if you've already tried In your past videos but if you haven't you need to sand / polish that feed ramp . Get that shit so polished you can see yourself .