Rx-135 Power Increase [Porting] | How To Control Cylinder Heating |
Vložit
- čas přidán 22. 07. 2023
- If the piston is tightened and bored into the cylinder kit, the cylinder will burn better due to frictio. When boring a normal piston, the clearance should be 20 microns in case of Godsey's piston and 25 microns in case of Artn's piston. Otherwise the engine will stall while driving.
So people who are replacing the old piston with a new one should be careful.
Thank you ! and Dont forgot to SUBSCRIBE .
- Team en los 90 motorcycle garage
Connect with us : 9995730746 - Auta a dopravní prostředky
Well explained 🔥
❤
Namal sheyar cheyaathe varuna allkaraaa namallee snehikaaneee analle video Saport cheyannee
Brokiii 2 k sub indaalloo eniitum enthaa atreem sub video kannaatheeee... Karanam enthanu parayam njan oru CZcamser anu athukondu parayaaa orikaalum shear cheyarruth. Namalle ishtapedunavar nalle video kannumm illaagil oraalum indaavillaaataaa
🔥🔥🔥🔥🔥
Carb tuning needed after porting?
❤❤
Milage
💨💨💨💨💨
Hai❤️
35-40 micrones best ayrikkum.
Noise Kuduthal Varan Chance Ind Athumalla Compression Kittanum Padyirikkum
@@enlos90MotorcycleGarage 👍
@@TRIVANDRUMBASEDKERALITE piston ബോക്സിലെ size - piston size(measurement) is the correct clearance.
Topent karunutooii
??
100പോകുന്നുണ്ടോ?
Yes