ebike Tips. Programming the 24v, 36v, 48v, KT-LCD3 on-board controller computer
Vložit
- čas přidán 14. 08. 2017
- E-Bike Tips. Programming the 24v, 36v, 48v, KT-LCD3 on-board controller computer
Rear Hub Ebike Conversion Kits augustineebikes.com/hub-conve...
Front Hub Conversion Kits
Mid Drive Ebike Conversion Kits augustineebikes.com/1middrive...
Lithium Ebike Batteries augustineebikes.com/ebike-bat...
Great Bikes to Convert augustineebikes.com/affordabl...
Fast E-Bikes augustineebikes.com/3000w-ebikes
Fat Tire E-Bikes augustineebikes.com/1fat-tire...
E-Bike Controllers augustineebikes.com/ebike-con...
Thanks for watching our videos. We hope to provide you engaging and relevant information on the growing e-Bike market and it's latest trends and technologies. When you have a moment come DISCOVER our curated high quality E-Bikes product line up Visit us @ augustineebikes.com.
Check out a just a few of our ebike blog pages.
Check out bikes for under $500 augustineebikes.com/mountain-...
Rear Hub Ebike Conversion Kits augustineebikes.com/hub-conve...
Front Hub Conversion Kits
Mid Drive Ebike Conversion Kits augustineebikes.com/1middrive...
Lithium Ebike Batteries augustineebikes.com/ebike-bat...
Great Bikes to Convert augustineebikes.com/affordabl...
Fast E-Bikes augustineebikes.com/3000w-ebikes
Fat Tire E-Bikes augustineebikes.com/1fat-tire...
E-Bike Controllers augustineebikes.com/ebike-con...
QuietKat Electric Off Road Trike
amzn.to/2f3Caov
All Weather Electric Mobility Scooter
amzn.to/2fhkQcS
E-Bike Controllers augustineebikes.com/ebike-con...
This video contains affiliate links: We part of the amazon affiliate program and thank you for your support.
E-Bike. The #KT-LCD3 is a powerful E-bike computer that determines and controls over 20 important functions on your ebike. The KT LCD3 is connected directly to your controller box and controls these functions, just to name a few
Trip speed as well as maximum speed
handlebar functions
power-assist startup
Power assist ratio
km vs mph
Cruise function
Battery capacity indicator
Real-time battery voltage
Motor power and temperature
Brake display
Turn on backlighting and lights
Environment temperature display
deFault code display
User parameter settings
supply voltage identification
and more.
To turn on the KT-LCD display, first turn on your battery then press the middle function button for 3 seconds. This brings up the first of 3 information displays about showing information about your ebike, such as battery levels, trip distance, temperature, cruise function, lights, brakes, motor temperature, error codes and more. To scroll through the 3 displays, press the middle function button briefly and it will change from display to display.
To control the general project settings hold down the up and down arrow keys for 3 seconds. This will bring you to your first settings. Here you can control maximum speed, wheel size, (very important), mph vs km, and temperature settings. To change the settings use the up and down arrow keys, when your selection appear press the middle function button It will save your settings and allow you to scroll to the next settings. When you are done making your selections hold down the up and down arrow keys for 3 seconds. This will bring you to the Parameter settings menu, where you will see a blinking P1 at the bottom of your screen.
P1 controls your motor characteristic parameters. You will want to check with your manufacturer for the correct settings for your motor.
Press the middle button to scroll to P2.
P2 controls wheel speed pulse signal. Again if you don't know consult your manufacturer.
P3 Sets your pedal assist function. The settings are 0 through 5. When set to 0 the
throttle is dependent on the PAS Gear Ratio. When set to 5 the throttle
will provide the most power.
P4 Sets the Throttle Start-Up Setting. This is an important one. When set to 1 the throttle will only activate the motor after the motor has been activated via pedaling.
When set to 0 the throttle activate the motor when triggered
P 5 is your Power Monitoring Setting. Again this is important. If the setting isn't correct you won't be able to determine how much you have left in your battery. There are settings for 24v, 36v and 48v. If you don't know the correct settings, set this to 0 for real-time voltage mode.
When done with these 5 settings press the up and down arrow keys to move to the C Parameter settings.
C1 is your Throttle Start-Up Setting. Check your manual for your preferred settings - Jak na to + styl
So basically, don't change anything unless you have a manual. Very informative!
you can find good manuals online as PDF's, just search 'KT controller parameters manual'
Exactly
Cheers mate! You helped fix my battery problem. The battery was full, but the monitor was reading an empty. It did show the bars and they was draining, but overtime, it was draining just too fast. I was able to see the temperature for the controller as well! So i'm set and able to read it!
Bellissimo video con spiegazioni chiare ben dettagliate che mi hanno permesso di configurare il mio LCD 3. Grazie complimenti.
English plz
what you are missing is the fact, that when you press up and down 10 seconds after turning display on, it will bring you to maximum speed settings. If you press it for example 1 minute after turning on display - it will not bring you to those settings, but will allow you to reset distance since the last reset.
Hi
I hope you can help.
I have got 48v 1000w ebike with throttle battery display. I have purchase a lcd screen to connect but there is no connection to conection. I try to weld to the same wire colour but can't use throttle anymore.
My question is Can i use anther lcd or just have to use throttle power signal display?
hello thanks for the video, a question this screen serves for a golden motor brand engine, this motor has to connect screen and pedaling sensor is 36v will this screen work?
Great descriptions and a levelheaded approach to programming.. Helped a lot with my new controller. Do you happen to have a wiring diagram for a 1200w Risunmotor controller? KT36/48VPRL-SLSO2G They dont send a wiring diagram with their controller. I am an electrical contr. and just need the ID of the terminals. thanks much
Hi sorry please could you help me my bike is 36v 250w motor in regards to the VOL setting is this setting to indicate how much battery is left or isit voltage control to the motor? My default value on setting 1 is not 31.5 but 10 please could you explain what VOL is
Hi this was of great help thanks ! dont suppose you could recomend some decent mudguards for my fat tyre bike please ? as im struggling to find some .; thanks !!!
hi i have a 2000w motor 60v battery and would like to know if all i would have to do is upgrade the lcd to increase the 72 kph restriction?
Hi
I changed the old damaged BLDC controller with the new one (KT-48ZWSRL)
I also had the 6 wires for the Hall sensor, didn’t connect the white one.
If I go in „walk“ mode (long press of down button) the motor is rotating but if I use throttle nothing is happening.
Some advice?
I have NCM Milano with Das Kit controller in U.K. if I sop in high gear starting is near impossible as there is no throttle (UK law). In walk mode the power is maximum but speed is limited to 3 mph. Is it possible to reprogrammed to a higher speed so that I can get started and change down gear?
Thank you very helpful
I have a 1500W motor Ebike .And I really need a 48v that will get up to 72V .The one I had for it is a SW900 LCD E-zBike display but I have tried to order this two times and they never send me the right one.So do you know just who I can order this one I really need or just one that will do the 48v Up to 72V that only my 1500W motor will work with?????
Hi buddy I really appreciate your videos on all e-bike rides and information. Do you think you can do a video on the display screen for the kristall rx20 electric folding bike please I want to know how to use the settings on the screen please
Thanks for this video! You nailed my dellema right from the start of this video! P5 is factory set on my kit to 48v and today had to pedal home literally dying lol when the power cut off with 3 bars showing! !! I'll try the 15v like you mentioned Big Thanks! !
Jay Klepacs Hey , Did that work for you ? Setting it to 15Volts
What about if I forgot the password mate any idea to unlock
Alexandre Costa
Hi, really nice video. I have a question, i buyed a 36v 500w Hub motor, and the controller doesn´t have a connection to a LCD panel so i can control the level of the power of the motor. Do you know a solution to have it incorporated somewhere?
The reason, is that the PAS always goes to full power on the motor, and sometimes i don´t need that, i need just a smooth assistance of the motor.
Hey Alexandre,
You would have to buy a new controller that comes with an LCD or LED that will work with your 500w motor. The good news is that if you match the voltage and the wattage for your motor, there are plenty of great options under $60 that will really help you out and allow for PAS. Let us know what you come up with. Cheers!
My battery says that the cut off voltage is 36v , however my motor cuts off when the battery reaches about 46v. Any ideas as to what the problem is ?
hello I have a question, the display does not show the battery status, the battery is full, the engine works only on the display, no bar
Is there a way to increase the LCD timeout settings? I believe the current default is 5 minutes. Wipes out your trip statistics if you have to stop for longer than 5 minutes. Thanks!
no there is no way to change timeout settings, the best way you can calculate your total distance for a single trip is to write it down every time you stop then add them together for your total
Hello.... First thanks for videos very helpfull..
I have a 12000w e-bike with the ukc1 display... Im going to install the app to use with the Bluetooth.... I saw that is as different driving modes as boost and others that i dont remenber the names... I like to understand that because sometimes when i brake she gives a jump forward... Can you give a litlle hellp?? Thanks a lot
I got a csc 48v 1500watt can you please tell me what my p1 and p2 should be ? To go fast as possible
Good job.
Anyone know what parameter settings I should use if I use it with a Bafang BBS02B 750w mid drive 48 volt? Originally used the KT-LCD3 with rear hub 1000w.
Hey hey I would like to thank you for your assistance on how to program my LCD display I just reprogram and now I'm doing every bit of 45 miles to Highway thank you I was only doing 15 miles per hour big difference thank you for your assistance
Does the KT LCD-5 have the same functions as the KT LCD-3 and do you program it the same way?
Good question. I have only tested the KT LCD-3. I would be curious what features the 5 has
hello, i have yose power 36v 350w kit and theyre batery 36V10.4Ah E-bike Pedelec Li-ion battery downtube Bottle Lithium battery. i want to know the setting for my bike but i cant find it anywhere, would u be able to help me ??
Hi pal, thanks for the video it was just what I was looking for, but could not find anywhere. I was messing about with my LCD and upset the factory settings, and was unable to find instructions on how to reset my computer, until I found your video. I am delighted with myself after seeing your video I reset my computer on my Zipper Z6 36V e-bike. I think in the US its called the Archer e-bike! You are a scholar and a gentleman.
From John in Ireland... 13th July 2022.. (I have a question, my bike has just walk assist at 6 mph, can this be changed to full power on my thumb drive?)
Thanks in advance.
Can you damage the motor by inputting wrong tire size on display?
What is the voltage input of display, doest it work with 5vdc ?
What would the P5 setting be for a Battery48V 14Ah Li-ion battery with Panasonic cells? I have the sondors fold x and the kt lcd3. I have been trying to set it up, i set the P5 setting to 15 and it didnt show any battery so i set it back to 0. Also the spedometer doesnt work anyone know why?
Hi I would love you to do a tutorial on the M5 lcd
Hey, thx for the vid. I got a problem on my ebike. The LCD is showing an error message '06 info'. Also, the temperature symbol is loading... Doyou know what it means?
Gaspard COTTIN about the the temperature you need to check the sensor, also the error 6 sometimes depend of the sensor. Try to disconnect the Throttle or other stuff one be one and check if you have other error.
Hi can you change a fat tire ebike 36v 10amp 5oow the controller for that ebike is 36/48v to a 48v motor thank you
I think , your video is an awesome video that's exactly what I'm looking for someone to explain it to me from the very beginning . because that's exactly who I am a beginner. but you keep saying referr to manual on the motor is that what you're referring to??
Hi can you run a 48v battery off this screen because I've tried it and both of the screens I had of burnout they still turn on but they won't work the machine and it's only a 36v kit what I've been told there 36 to 48 V screens football full of burnt out
Hi i just brought a new A20 there is some issues with the lcd diplay when i turn on and starting to throttle automatically lcd go off
i have a cheep ebike its my first i started to try and fugure out the setting now the battery runs out in like 30 min i cant find anything that said reset or factory setting can you help
This is critical for making a purchasing decision.
(05:05) If the motor manufacturer doesn't respond to inquiries (almost ALL of them will NOT respond to user emails) but you know the electrical specifications of the motor (watts, amps, etc), are the P1 settings obvious and we can still program the unit? OR...does it require knowing proprietary manufacturer codes to set for given motor electrical specification values and we're out of luck when manufacturers don't respond?
(e.g. for 750W motor enter "3", for 1000W motor enter "5" and so on).
If it requires entering codes, rather than actual specification data, is there documentation anywhere that translates motor electrical specifications to the required codes?
have a problem with this display when I turn on this screen appears with 4 0000 and I cannot make it work because I do not know the code can you help me please?
I have a KT-LCD display and I have a 48V battery that is suppose to show up to 58.8V but the battery only shows 53.6V fully charged and it cuts out at 33.6V. The P5 on the settings was set at 12, and I understand that is suppose to be for a 36V battery system. It is really suppose to be set at 15, for a 48V Battery system or "0". Are you suppose to change the C10 setting to "Yes" to make changes on the display?
Did you find any answers? This depends a bit on your battery chemistry and if your batteries are working as they should. I have blown 2 cells in my lipo packs due to 1st time a bad balance connector and 2nd time vibrations and rubbing on the bike. After this the cells can go dead short so the other cells do not see them just as if there was only a straight wire there. Then if you charge without balancing or without checking you are getting a balance voltage on all of the cells you can be overcharging the other cells as the blown battery cell is no longer there to absorb it's share of the voltage. Then you end up with a battery pack that is 3.6V lower for each blown cell also you will be damaging the pack and risking a fire each time you try to charge.
This can confuse the controller.
your battery is 48v means 13sX3.7. So the max voltage you can get is around 13sx4.2=54.6. You lcd shows it correctly
48v battery should not show 58v in any case. 54v is the maximum
a 48v battery maxes out at around 54v, a 52v battery maxes out at 58v
Hi I have a gogobest gf600 I need the parameter settings for it ihad an error code so I switched it off and back on it cleared the error but my settings have all changed I need the parameter settings to reinstall
How do you factory reset the display? Just go to C10 and y and that factory resets everything?
Informative video thanks - Is there any way of changing the wattage that is applied with each PAS level - if that makes sense - for example my PAS level 1 applies 50-120w of power, PAS2 120-220w, PAS3 220-350w, PAS4 350-420w and PAS5 420-520w - my motor was a 350w but it failed, I now I have a 250w and I am a bit concerned that PAS5 will decrease it life span as the other one failed after 14 months.
No, there isn't.
Yes,you can mix the C5 and C4 to lower the power respectively
Hallo I have Et. Cycle F720 from Germany.it has a Das Kit c7. but with my Das kit C7 I cannot change the settings (especially I cannot change the speed settings for my throttle) . if I buy Das kit c6BBT or Das kit c7BBT will it work with my ebike. Please let me know.
I have 48v battery going to bump up to 52 volt battery will my lcd display handle it
I have a KT-LCD7. Throttle works at zero but the pas and cruise I can't find. I did EVERYTHING in the directions. My milage is set at zero and won't change while riding.
Hey I have an issue with my bike the lcd and everything works the throttle is not responding , all wires look fine not sure what to do! I have videos to show what I mean
Help!My KT_LCD5 (with 48v 1000watt motor), top line (TM) flashes and I can't reset. Used to work, but now can't change at all. How do I reset to default?
Turn off Battery. Disconnect from the controller, wait 5 minutes and reconnect. It should go back to factory defaults.
hi
I have a damage to my kt3 lcd screen
I have put a new one on but it only works with the throttle with no paddle assist
could you help me please
ivan
Little late to the party but I'll try anyway. I currently have a 36v battery running on the KT-22a - 36v/48v- 500/750W. My question is what will happen if I upgrade to a 48v battery? Simple math pushes the Watts to 1056 will the controller limit the Watts?
The controller will use the same current. Why are you trying to limit the Watts? To protect your motor? You can restrict the Current output of the controller using the C5 parameter, which will restrict the Watts in a similar fashion. Setting C5 to 10 will divide the Max Current by 1.10. Setting to 8 will divide by 1.15, 7 by 1.2, 6 by 1.25, 5 by 1.33, 4 by 1.5 and 3 by 2.0.
Meu display travou , ele fica mostrando 555 você consegue mexer nesses números ,mais não vai pra outras funções , o que devo fazer para destravar ou desbloquear?
How do you turn on the lights on the bike?
Amazing.. Please can do on DX-D (with one "M" button display). Ancheer ebike
No info on how to factory reset the thing. I have 555 screen flashing and no option to go anywhere from there or to leave the page.
I might have missed it ... did you say how to clear the trip odometer?
Directly from the manual: After power on for 5 seconds, hold up and down arrows at the same time, single trip riding time (TM) and single trip distance (DST) flash, hold power button shortly, the content of both is cleared. If failed holding the power button within 5 seconds, it will automatically return the display interface after 5 seconds, original content is preserved.
My pedal assist inexplicably stopped working in a schwinn e bike. I have the manual and says almost nothing about using the lcd panel.
LCD81F how do you put the speed on every pass, like pass 1 it use 20% batt, pas 2 40% pas 3 60% pass 4 80% 5 100% ??? i can not find it anymoreq, i can not get into that mode again, can you help me ?
On the display I see this : motor position sensor fault ! what is mean ?
Necesito saber como arreglo mi bicicleta eléctrica pedego? En el display d la pantalla me sale error 16. Y no me acelera. Podría alguien ayudarme
🚨 *Very nice channel*
If I had a manual to check I wouldn't need to find the info on CZcams So while I don't expect you to explain stuff like sine wave settings there are others that you just skipped over so I don't even know what questions to ask about my battery or motors or controller if I had the opportunity . You just read the manual
I am not sure what LCD unit I need. I have a 20" front-wheel-drive 36V 750W motor & powered by a 36V 20ah ion-lithium battery ( I am new to this so can you please help me)
typically KTLCD3 and KTLCD8 work the same on KT controllers, LCD8 is better though, it has a full color display and is able to show you all the settings at once
Hi mr.why my display ebike go off after same second ?
How do you reboot a KT-LCD1????
i got an g51 screen and controller but the seller told me they only match with geard ebike motors and not intended for scooters ... why is that plz help
Cyclamatic Power Plus CX1
How to get more speed for this bike
My Ebike 48v so can i put battery 60v? My controller on board write 48v/60v so it can burn motor and controller? Pls help me Thank you for your answer me. Thanks advanced.
60v is the limit your controller can handle BUT do not buy a 60v battery as you will burn your controller, buy a 52v battery, a 52v battery at full charge is about 58v
Is anyone active in here anymore! I need help with my bike. I have a 1700w bike with a 17.5ah 48v battery and bought a spare battery that is 17ah 48v. When I place my spare battery in it dies in power 5 setting or above 1300w. Is this battery sag my guy told me the controller or original battery is set to 40amp and most batteries only handle 30amp what settings can I change I tried C5 to 8 and C12 to 2 but still happens. Not sure if I’ve damaged battery but I have no issues until I use thumb throttle and get peak power
Hi. I have the KT60SVPRK-SLS02G controller.
I am trying to find out how to modify the settings. Specifically if i can change the low cut off voltage to suit my lipo battery pack.
Also i would like to know if the auto voltage detection works well and if there are any tricks when connecting. I want to be able to use two different battery configurations with the controller. 16s lipo (nominal 3.7V max 4.2V) i then want to be able to make the same battery pack into an 8s 2P (or just 8s: no P:). This way i can use the bike for either high speed on the road or low speed high power for climbing off road mountains.
Ps. can this controller charge the battery via regen?
On the controller it says it is a 60V (i'm guessing nominal which is around 16s lipo) 45A low voltage cut is 50V. Display is the KT-LCD6
I think there is an auto voltage detect for lower voltage batteries but if not i would like to be able to change the setup for different voltages.
Thought this was going to show where your settings should go on different battery sizes
Please help me, my throttel not run , im buy new throttel but not run again how to fix my problm ?
Did you have istruction about display? Unfortunately on my disply it s hapen this:
When is on ask me the pin but i don t have, someone says me it impossible and i ve to buy another display
You can suggest me where can i find instruction
if it is asking for a pin the LCD may have a password enabled, unfortunately there is no easy way to bypass the password without buying a new LCD, you can try to unlock it but its easiest to just get a new one
My LCD screen has never come on what can i do?
How do I reduce the voltage from 48v to 30v Brainpower Motor Controller
Hi can i use 48v battery for 36v hub motor?
The battery will drive the motor, no problem. The problem is your controller. Make sure your controller can handle the extra voltage. Many times controllers are designed to handle more power, but some of the cheaper ones will burn out. So check your specs
How do u reboot it ?
how do i reset to fsctory default
Hi
At my Bike the Motor Start workin After 1 or 2 Meter . Give it a setting to Make it start instandly if i Start pedeling?
Set the P4 setting to 0
AUGUSTINE EBIKE STORE 2018 ok will try it later ty
I can't get into my event setting I think my manufacturer designed it only has basic speed wheel size etc
i'm supersized they don't have a security setting. go in the store you set a password and the bike goes in major re gen mode cant be ridden . major battery charge till a pass word is entered.
Don't EVER put a password on your LCD. If you forget the password, your LCD is now complete junk. There is NO WAY to reset your password on these LCD's.
Anyone using a omt-3 Any tips or help?
I have a weird issue where my temperature is - 31 F when it's actually 91 F outside... Any ideas why?
I have never had that problem. Clearly the internal sensor is not working. It is not something you can program.
Mabe in c centigrade like in Europe. Look to change temperature displey settings Fahrenheit or centigrade.
Top
What's the point of "check your manual" what manual are you talking about?
many kits dont come with manuals unfortunate, thankfully the people that do have manuals have created PDF's that you can find with a simple google search, just look for KTLCD3 Parameters Manual and you should get PDF's as your first and second result
Ciao volevo sapere me xche nn mi funziona la velocità quando cammino con la bici nn mi fa vedere la velocità
My display stops showing mph when I'm coasting. Is this correct, or might it be defective? Seems to me it is essential to know your downhill speed. Also, this might be the reason that my mileage is wrong, I go further than it indicates even though I have the correct wheel diameter setting.
IT should show your speed at all times. The motor/wheel is connected to your controller and your controller is connected to your LCD. It is important to program the correct wheel size, but that will have no bearing on that issue. I have checked the Kt-LCD3 against my Garmin GPS computer and the difference in mileage has never been off more than 2/10th of a mile. Maybe something is wrong with your LCD. If you decide to replace it, think about upgrading to the SW-900. The Kt-LCD3 was introduced as a 24v/36v controller while the SW-900 was introduced for 48v. Good Luck.
Thank you so much for taking the time to share your expertise with me. It is greatly appreciated.
Your wheel speed sensor magnet is probably misaligned.
I have the same problem when coasting , I was wondering if there something in the parameters settings to correct this.
When I fitted my new lcd display and controller I followed the parameters settings that the supplier sent but I could not get the motor to run. I went into a pedalec forum and was recommended to set no2 in p parameters to either 5 6 7, which worked perfectly.
Does it works with 52v battry as well?
It doesn't have a setting for 52v, but you can run a 52v battery with this, however you may not get a fully accurate reading of your batteries capacity.
hello, i bought an lcd 7 to replace my broken up old one
It works in general but when i pedal my bike it won’t even turn the motor on, it’s weird because my walk function works
Did you get it to work having same problem.
@@colton167 hey, I changed the internals off the old broken one into the new and it worked, this is due to both monitors having different configurations, they are the same, but the new one was not configured to my bike
Check your manual ...brilliant !...
How do keep it in full throttle mode with out having to leave it in the settings menu display on all the time???
When I peddle my bike back wheel locks up, Confused
I would have to know more about your bike to answer that question
hi would this kit be ok for 52v,thanks
Yes
Ok if I have a 36v with 750w motor what ah on the battery do I need?
The AHs determines your range. The higher the AH the greater your range.
for a 36v kit you need a 36v battery, the batteries AH will determine your range
My system shutdowns even when charge of 2 points exista Mine is a 36v battery and p5 is set to 15 and sstill it happens
p5 at 15 is for 48v batteries not 36v
Do this display fit to any controller I mean does all the 48v 1500w controller take lcd display?
all KT displays are compatible with all KT controllers, you have to make sure the connectors are the same though, some displays/controllers have the normal SW connectors while others have the WP connectors
How do you turn on the headlamp?
Pressing the up buttom for a few when u have the display on then i have to turn on
How do I get it open to get water out of it
Screws on back
Where do you buy your ebike parts from. It seems that EVERYTHING I order gets individually shipped from China and I have to wait over a month for each component. Does anyone in the US store these parts?
Greg, it may or may not be the parts you're after, but I sell controllers, LCD screens, etc and am located in the US. :)
Lunacycles