Hand Cranked Air Raid Siren
Vložit
- čas přidán 2. 04. 2021
- A video about how an air raid siren works and how to make one without electronics.
If You ever wondered how an air raid siren works than watch this video. Plus I also show how to make one Yourself to annoy Your relatives, friends or neighbors or just for widening Your knowledge.
STL files: github.com/AudasWasTaken/Air-...
If something is not clear You can always reach me on discord: / discord
If You wanna help me create more content chack out my Patreon: www.patreon.com/user?u=75474450
Site which i referred: sites.google.com/site/gabebat...
Catch me on twitter: / audas30821741
Enjoy and have a great day!!!
Music:
Divider by Chris Zabriskie is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/...
Source: chriszabriskie.com/divider/
Artist: chriszabriskie.com/
Body and attitude - DJ FREEDEM - Věda a technologie
This is too good editing for a below 60 sub channel, I've subbed and probably will be watching more
Thank You! It means a lot to me!
325!
Pretty great video! But, I'd just like to correct some misinformation.
Usually, most electromechanical sirens' chopper(s) spin at 2850-3450 RPM, since they usually have 7-16 ports, they don't need a higher RPM to get loud. For example, let's use the Federal Signal 2T22 as an example, it is a dual Rotor siren with one of the chopper assemblies having 10 ports and the other having 12 at 3450 RPM, this gives it the classic air raid siren sound effect you hear in Hollywood movies. If your were to take a 5/6 port siren (Such as a 1000T or GP3) and give it 6900 RPM, it would sound almost identical to a 2T22. In fact, the only sirens that have high RPM motors are often smaller sirens (Such as the model 2 and GP3) and some vehicles sirens, as well as Thunderbolt sirens. (Depending on the chopper level)
If you'd like, i could give you some tips of how to improve the loudness of the siren you 3D printed.
1: Make horns or a shroud for it, this will make it louder by having it push against more air.
2: Make the chopper design more efficient. You already made it a directional chopper, so that is good. Make a sort of cone like structure surrounding the middle of the chopper to direct air outwards, and put triangles on the ends of the Vanes.
3: Make it larger or increase the RPM, but you could make it louder by having it have 12 ports instead of 6, and reduce the RPM to around 3000-3500 to have a similar pitch but more power, which you can then use that power to make it bigger.
Thank You! I was pretty new to sirens, but the working concept of it amazed me. And I was sad that mine was not as loud as I imagined, so I realy appreciate Your tips! And in the future I will definetely improve my siren with given tips. Again thank You very much, because I always like to learn new things!
No problem! I'm glad to help out.
Bruh, looks large to learn...
The siren that was on the website (with the set of 4 and 5 ports) is a federal signal "Model 2T", 2 horsepower, vertical air raid siren.
Thanks! I didn't know that!
Pls make the Chrysler air raid siren
I made a bigger version of that it was louder than that
The issue is your siren is made of what is essentially plastic thus you yourself will have to use your energy to spin it up, if you look at any cheap ish hand crank air raid siren a lot of them barely use any energy to get it going because of the way they’re designed and the fact the rotor is machined out of metal instead of plastic!
0:00No that is an ATI siren
Awesome!
Thank You! You are awesome for watching this video!
@@Audas101 no problem!
hehe siren go vreEEEEEEEEEEE
Just like DIO did, if you catch my drift :D
Chain drive would be more efficient. Less friction loss
That might be true but at the moment it was my first time making gears
cool
You are cool for watching this video!
the siren in your intro is a ATI TORNADO SIREN
@@t2cm2a7most sirens were from the Cold War, and possibly world war 2 however in the states a lot of them were reused as tornado sirens.
Just a common afternoon in 40's london
DUDE
This is identical to the guts of an open source .Stl air raid siren i got from thingiverse. Unfortunately, tolerances were poor, and resistance meant u broke the first cog trying to spin the final one. Too much resistance.
Hey! Well I can assure You that I have designed this air raid siren myself. I was interested in air raid sirens myself so I learned basics about them and designed this little siren. And I realy like that people react and comment on how to improve my siren!
I think the stator is not corrected so it needs the chains
Nnnnnnnnn
The sound is a carter
What is a carter? Please tell more!
Or call the castle castlelings
I’m young still a smart of sirens
And the image of the siren is a aci warning sirens and is not air raid
And in galena park whe use Whelen wps sirens and there a lot of sirens of air raid
DUDE
the siren in your intro is a ATI TORNADO SIREN