Introduction to the PMXU83BT Great Audio Mixer with a Small Price Tag.
Vložit
- čas přidán 10. 09. 2024
- This Video is now part of our New www.amazon.com/shop/expertisland Your Fun electronic haberdashery Store Now On Amazon.com
The Pyle PMXU83BT with built-in Bluetooth wireless streaming receiver works with all of today's latest devices - Smartphones, Tablets, Laptops, Computers...
You Can Now Purchase From expert island or from our amazon affiliate
links Below
amazon expert island Showroom
www.amazon.com/shop/expertisland
In The USA
Amazon.com amzn.to/2HIMBMS
In Canada
amazon.ca amzn.to/35QBVUo
expertisland.com bit.ly/PMXU83BT
Features
DJ & Studio Console Mixer System
Multi 8-Channel Audio Source Mixing
Built-in Bluetooth Wireless Receiver
FX (Analog Effects) & 16 Bit DSP processor
Direct-to-Computer Connect & Sound Record Ability
LCD Digital Display & Front Panel Control Center
Rotary Adjustment Knobs & LED Indicator Lights
MP3 Digital Audio File Compatibility
USB Interface: MP3 Flash Drive Reader/Computer Connection
Connect & Stream Audio from External Devices
(2) 1/4’’ (L/R) MAIN Outputs
(4) XLR/14’’ Combo Audio LINE/Microphone Inputs
(2) Pair RCA (L/R) Inputs
(2) Pair 1/4’’ Mono + Stereo Inputs
1/4’’ Send + Return Inputs
1/4’’ Headphone Jack
Stereo Level Fader/Slider
Output Signal Level Indication
BUS Audio Control Sound Routing
PAD Channel Source Input Switch
Independent Channel Input Audio Configuration
Gain High Mid Low FX/Send Level Base + Tone Adjustment
+48V Phantom Power Control
Power ON/OFF Switch
Used for Professional Studio Applications & On-Stage Performances
What’s in the Box:
Bluetooth Studio Mixer
Power Adapter Cable 4-Pin
Wireless Bluetooth Connectivity:
Hassle-Free Audio Streaming Ability
Works with All of Today’s Latest Devices
(Smartphones Tablets Laptops Computers etc.)
Bluetooth Network Name: ‘KT-08UP’
Bluetooth Version: 4.0
Wireless Range: 15’+ ft.
Technical Specs:
Input Mixer Channels: 8-Ch. (+ FX/Headphones)
Mic Input: Sensitivity/Impedance: 1.5mV/750 Ohm
Input Frequency Response: 20Hz-20kHz +/-3dB
Input Distortion: 0.03% 1kHz/150mV Input
Channel GAIN Adjustment: +20/+64 (-6/+38)
HIGH Gain: +/-15 dB 12kHz Frequency Shelving
MID Gain: +/-15 dB 2.5kHz Frequency Shelving
LOW Gain: +/-15 dB 80kHz Frequency Shelving
HIGH/MID/LOW Adjustment: -15/+15dB
Stereo Output Level Meter: 5-Segment (+6 +3 0 -3 -10dB)
PAD Input Channel Adjustment: 26dB
Peak CLIP Level: 3dB
Phantom Power Voltage: +48V
Power Supply: 100/240V (+/-15V DC Power Adapter)
Digital Audio File Compatibility File-Types: MP3 WAV
Dimensions (L x W x H): 9.3’’ x 10.8’’ x 2.6’’
Comes with 1 year CANADIAN serviced manufacturer warranty
expert island is a Canadian authorized PYLE retailer, buy with confidence
I bought this unit but can't get it to work! Hoping it's something I'm doing wrong. Trying to play my keyboard through it to my Elliott amp head to my Elliott speakers.
how do it compare to Pyle PMX466? how does Pyle PMX466 compensates de lost of the [CTRL OUT] and [SEND & RETURN] Socket?
[CTRL OUT] Output to Connect the monitor room to monitor.
[SEND & RETURN] Socket: When using the [SEND] output socket separately, can be connected with power amp lier, act as the monitoring signal. When using the [RETURN] input socket separately, can be connected with the audio source. When using two sockets together, can connect with the external audio processor
Great video thank you so much very detailed I’m definitely buying one of these truck driver from Southern California.🚛
great review. But I would’ve liked to have heard an explanation as to why the master meters weren’t registering your voice.
if I remember Right The channel levels set the set the audio level on the digital output to the computer. so your main level can be used for the speakers in the room.
On windows 11 the USB function does not work well. It only labels it a generic usb and when using audacity it will not record the stereo mix of the board and only records one mic input probably due to not having drivers. I am trying the line in by using the tape/CD in since you said it can be an RCA tape out. It does not send any signal to my PC while its connected to the Line in, so I think that part isn't actually true. Really sucks because I love having everything running through one board, but it just does not have an easy way to record it all unless i lose my control room or main out slots but now i have to go buy other cables. If the USB actually worked I'd say this is a 10/10 buy.
Great video. The versatility of this mixer is awesome. Just one question regarding the effects. Is it just one effect that is adjust 16 times with the DSP or is it multiple effects like reverb, hall reverb, chorus, vocal echo etc? Thanks
Great video! I want to connect MAIN OUT to my receiver CD input RCA connector. Do I just simply need a pair of 1/4" to RCA connector L/R cables?
Can you tell me why mine keep disconnecting from my macbook pro via USB?
Great video, is the headphone output coming from the level of the overall channel or just from the gain?
Will this record mode send signal through USB cable to OBS as streaming?
I plugged in an XLR cable to Line 1, and no matter what the settings were, it sounded nothing like a voice. Just scratchy robotic signal pitch. Not sure what the problem is.
Does this thing has multi output or is only stereo? My daw will see each channel or only 1 and record the whole mix together?
Just bought one of these... the mics work great .. so the xlr to speakers are fine... but I went to just put the usb in from my laptop. and the music is not playing from the speakers. Am I doing something wrong?
Push the button that says USB - 7/8
How would you have 8 wireless mics set up on this though if 5/6 and 7/8 are joined almost in stereo?
I would want a bigger mixer only the first 4 channels are setup for Microphones, most mixers today have a combination of Mic and line inputs. like a 12ch mixer might have 6 Mic/line plus 6 more line input set in stereo, but there are some mixers that have all channel as mics/Line. here is a link to help amzn.to/4ceuqYu PMXU128BT
I would like to use my Bluetooth headphones. Can you recommend a blue tooth Transmitter that might work. I tried a cheap one but couldn't get a signal to my blue tooth ear buds.
When I try to connect the mixer to a PC running Windows 11, I get a message from Windows that the device has malfunctioned and no connection is possible. "PC" is lit on the mixer but no signal is transferring to the computer. There doesn't seem to be a driver available anywhere online. Any help would be greatly appreciated!
You figure it out yet??
@@wiillthebarbertv9415 been looking into this myself - have you tried setting it with up with bluetooth already or no? will keep you posted. engineering grad scouring the web on this exact mixer so maybe i can help us both lol
@@mackgolia249 I was going to buy this mixer but I figured out a simple solution, I bought a used mixer with good mic pre amps etc, for phone calls, I can use a 10.00 Bluetooth interface from Walmart, run the 8th inch to quarter inch adapter to the mixer, works great
I need to know how to hook this to a computer (iMac). Where is that step? Where is your audio coming from? The computer?
Does the usb cable produce noise? I don’t see the ferrite filter !
Will the control out accept a stereo trs cable or are all of them mono
I connected this to a couple of Harbinger 100W speakers and the output volume is super low - going to return this. Not for me.
I would like to see a video on the PYLE PYD1964b.5 mixer to resolve 2 specific things I read in Amazon reviews but believe they are user error. The first being Bluetooth connectivity & the 2nd a hum when gain level is set above a 3.
Do you know if either of these 2 things are an issue with the PYD1964b.4?
Thanks!
Miguel ive been playing with this alil you have to press the usb /7/8 for sound from bluetooth
can you please do a video on how to turn off/toggle the direct monitoring for the mic inputs? it's really bothering me that I can't use my studio mic while hooked up to my studio speakers
and for some reason, the audio inputs are going into the same output in the windows audio settings as the phones output
also, both the L and R Main outputs only go through the left speakers, and the computer audio only plays when I have the 7/8UBS button pushed down, but then it also plays back the computer audio as a mic input
the stereo audio output also affects the mic volume in the windows audio settings, I think this is the wrong interface for me, either that or everything is just cross-wired. i don't know, and I don't care. I'm just gonna return this since I don't have time to wait for a response on how to fix this
Can I connect a wireless mic and run it through a controller ?
Hello friend, can i pan channels with this?
does it only record in mono?
Expert MAn
Do you ever review an hk audio speaker ???
If possible get a hk polar 10 or 12 to review !
Thank you
Tris mixer or the Behringher QX1220usb?
can I record two separate tracks individually like the focusrite on the pyle? For example, if I want to hear only what's played in channel 1. If the answer is no, will a sound recording software allow me to accomplish the above with the pyle mixer? If the answer is no, will a sound recording software allow me to accomplish the above with the pyle mixer?
There is no panning on this mixer.
Hey I see that you seem pretty knowledgeable on these pyle mixers, one I’ve been using recently stopped allowing me to change its mode into pc, the only things the display says when I cycle modes is bt and no. Just wondering if you know anything about it
I'm thinking USB Cable or USB Port on the mixer. try an MP3 on a USB stick. also make sure the power switch in the back is on ( the fx display should be showing you a number.) if you plug in the usb cable it will power up the digital display on top but not turn on the mixer.
Does this support asio4all inputs in daw?
Can you review the Behringer 1800xp 3000watt subwoofer
And what is the rms, cant find it
will it work with sony sound forge to record?
When I plug in my switcher I only hear the speakers from the right or left (whichever the output 1/4 cable is plugged into) how can I output in both right and left equally?
So you just go to each channel to what ever type effects you have and then repeat. Then go to another track to change that effect? I'm asking, do you have the ability to change the effect type for each channel or just the intensity of said effect?
No. The effects are global, as they are on all compact mixers like this. You can only affect how much of each channel you are sending to the effect.
Does it have a toe thumb line in
Can I connect my Alto professional bluetooth to the mixer to send music to my speakers ?
Yes you can. Just put the mixer in Bluetooth mode.
what type of usb cable?
Hey man great vid. When I plug USB in on my pc it sets the volume up incrementally until 100. But thats not the real issue. I use obs to capture audio from the mixer but sound is terrible. Any ideas?
Use audacity
@@isaacjh2178 turned out to be a faulty unit.
@@isaacjh2178Audacity does not recognize the Mixer in it's full capacity. It only recognizes it as 1 mic input, no matter MME, direct sound, whatever. The USB has NO DRIVERS and is only recognized by the PC as a generic unit. This causes audacity to only see it as one mic input and not as a stereo mix from the main out, nor any of the channels on it.
Have no Reverb?
First to comment 🤣yay
thanks for watching & being a subscribe
Nice but not useful for how to operate and troubleshoot when it does not work
Why do you always start your fx at 2?