NanLite Forza 60 and 60B Accessories: A Deeper Look
Vložit
- čas přidán 7. 07. 2024
- In this video, Barry Garcia takes us through the various accessories available for the Nanlite Forza 60 and Nanlite Forza 60B.
0:00 - Intro
0:09 - Nanlite Forza 60 Softbox
2:16 - Nanlite Forza 60 Lantern (18in)
4:42 - Nanlite FL-11 Fresnel Lens for Forza 60
5:54 - Nanlite Forza 60 Bowens Mount Adapter
6:32 - Nanlite Forza 60/60B Projector Mount with 19° Lens
10:32 - Portable Power Solutions and Forza 60/60B Handgrips
10:47 - Battery Grip (NP batteries)
12:17 - Nanlite Forza 60 Remote Controls (RC-1 and WS-RC-1)
Full list of accessories for the Nanlite Forza 60 and Forza 60B:
nanliteus.com/products/nanlit...
nanliteus.com/products/nanlit...
nanliteus.com/products/nanlit...
nanliteus.com/products/nanlit...
nanliteus.com/products/nanlit...
nanliteus.com/products/nanlit...
nanliteus.com/products/bh-fz60-v
nanliteus.com/products/nanlit...
For everything Nanlite:
nanliteus.com - Jak na to + styl
Terrific video Barry...
This guy is very good at explaining !!! Amazing video
Thanks! we like him too.
Nice lights 👍
BARRY! I think we met a couple of weeks ago at PPR in Atlanta. I was asking about the Forza 150B. Well, I ended up buying it and man-o-man what a fantastic light. I've used it on three videos so far for my CZcams channel and it's absolutely incredible. The light output (and quality of light) from this tiny fixture is amazing. I'm headed back to PPR next week to get a 60b - maybe I can get them to sponsor a video or two - I want to put the fresnel through its paces! Take care.
Thank you
Thank U!
Do you have any side by side comparisons of the 19 and 36 projectors?
great video!!! i am wondering if it's possible to still add a color gel ( CTO or CTB) while using a softbox for forza 60?
Hi, adding a gel inside the soft box would have to be done with a gel holder. Nanlite doesn't have one currently.
I just purchased the Para 90 soft box and after extending all the rods, there isn't enough slack on the material to seal all the velcro? Is there something I am missing here? the material is too tight.
Just picked up 3 Forza 60Cs + the Projector. Super excited. Does anyone have an idea of how i can mount my Projector to a ProFoto light? I am not sure if there is an adapter configuration I can use. I do have a Profoto to Bowens and Bowens to Profoto adapter but not sure how I can use my Projector w my B10s. Thx!
Hey, I’m not sure if I would get answer but I will try..😂 video is very educational. I recently get nanlite 60 and I need to know how to use correctly. I’m spotting video for my CZcams and I can’t get the right angle. Also it’s seem to me very bright and my background showing shadows of me in front. I would like to get and umbrella for brighten space around and have focus on me. Can you please help me what to do ? Otherwise I have two light for nothing 😂😂. I’m terrible in finding right 😢angle
Hello I was reading the manual. It says the remote will not turn off / on the light. Did I misread?
thanks for the review. I am very curious if might be convenient whether for the product capacities, or final light quality output. Is it recommendable with parabolic softbox of bigger diammeter such as the 120 ? THANKS !
The Para 120 would be too big for the Forza 60 light not enough punch on a soft box that large. The Para 90 would be a perfect size using the included Bowens mount adaptor included in the kit.
Great products! Just got myself Forza 60 along with the Forza 60 Softbox. As I am new to this I find myself confused when to use the half diffusion or the grid cloth? Should I only use the grid cloth with the raster. Some advice would be most grateful 😊
HI, If you need less light on a subject we suggest the diffusion, when the need arises for more light the grid cloth is a better option. We always say to check both and see what works best for your situation.
@@NanliteUSA thank you for answering my question🙏. Now I know what to expect and I will do some experimentation.
i would like to know if the Nanlite SB-FZ60 60cm Softbox has inner white diffuser?
Hi, no the FZ60 soft box does not have an inner diffuser.
Hi is it possible to connect the FL-11 fresnel lens to a bowens s-type light source like godox ? I have the godox system (ad 400) with s type adapter and would like to use your fl-11 with it? The information here was a little irritating. Thank you 😊
The Fl-11 is made specifically for the Nanlite lights. The FL-11 is made for constant light and will not work on a flash.
Does the Forza 60 NP-F battery attachment not like Sony branded batteries? The unit will not provide power with these batteries and can't even read them as having power. Is my unit defective, or is this normal?
Hi, the Forza 60 battery grip has worked with Sony NP batteries before. There may be an issue with the unit you have. Please reach out to our service team so we can help at [service@nanliteus.com](service@nanliteus.com)
My battery holder doesn’t keep power if you have to Hollywood the light, especially at angles
HI, David you might need to have it check out by the Service dept. Here is how to contact them.
Service: service@nanliteus.com or call (914) 345.5426
Am I to understand that with the new remote I can change the color of the Forza 60?
Please tell me yes
The Forza 60 is only 5600K. The Forza 60B can change color temperature using the WSRCC2 remote control.
hi. I purchased the Nanlite Forza 60 V-Mount Battery Handle Mount to power my 60b light, but unfortunately it killed my light, heard a pop noise and the 60b was done. its the first time i have used this adapter... very disappointed!
any reason why this has happened.... used the correct vlock battery
Sorry about your light you can have the light repaired at the Service Center contact
service@nanliteus.com or call (914) 345.5426
Where is the WS-RC-1 can’t find it anywhere?
Hi, the WS-RC-1 has not been released yet. It should be released here in the US soon.
Well, the bowens mont isnt so strong. Not abele to hold a bowens p90l softbox.?? And it´s Enoing too bee replace a plate for the orginal bowens mount and the smaller mount on the forza 60.
Thank you for your feedback. Nanlite is try to help out all customers by giving multiple options in mounting plates.
I need help, I have a Nanlite Forza 60 and I have lost its L-shaped support. I need this spare part urgently and I can't find it anywhere.🙁
So sorry to hear that. We’re forwarding your message to our team to see what we can do here to help.
@@NanliteUSA Thank you very much, I will be attentive.
Should you fold it back after use?
Yes, it is good to keep the box folded up after use.
Can i use the NP-F570 battery to power it up?
Yes, you can use two NP-F570 batteries to power the Forza 60 to 60B light.
WS-RC-C1 and WS-RC-C2 are the same products? What's the difference?
The difference is the ability to change the channels on the WSRC-C2.
Will this work with my Forza 300?
The Forza 300 has a Bowens mount so the Para90, Para120, or Para150 soft boxes will be the best for the light.
That is NOT a parabolic softbox - if it were the light would be shining back into the base of the softbox and from there be reflected out, among other things.
Paid $50 for the RC 1 that is useless since it wont turn on and off my Forza 60 or 300 now you want me to pay for that remote god knows how much????
Makes me even more upset. I got 3 of 60s and 2 of 300 so I should get it for free to replace rc 1 garbage that you made me waste $$$$$
Hi Sorry you have been unhappy with the RC-1. The new Nanlink App and Control boxes will be released in March. They will hopefully give you a much better remote control experience.