1/10 Scale HB Toys ZP1001 4x4 RC Land Rover 110 Defender
Vložit
- čas přidán 14. 05. 2019
- Full Running/Trail Video Here: • Off Road Test - 1/10...
Buy it here:
www.banggood.com/HB-Toys-ZP10...
Here's the HB Toys ZP1001 Land Rover Defender 110 RC Car. This RC truck looks very much like something else!...so again, we have another Clone to add to the collection. It is actually around 1/11 scale rather than 1/10 scale, so smaller than the TRX4.
Out the box this looks quite cheap and generally a bit toy grade, however, it has plenty of power from the 540/550 motor, and actually runs very well! I think upgrading the suspension and adding some softer tyres will transform this in to quite a capable crawler! - Zábava
![[CHEAP] RC Crawler with a lot of potential! HB Toys ZP1003 ZP1004](http://i.ytimg.com/vi/0XyOCHFeSwc/mqdefault.jpg)
I've got this one couple of years ago from a local store only after I've checked it Ali Express for upgrade parts. And there were tons of ém 🙂Two years later and spent another 300-350 $ , now it is a way better crawler, no but very capable trail runner : Swamp rider super soft tires 108 mm outer diameter, proper oil filed shocks , all metal links , rear and front axles ; stainless steel drive shafts , 3546 brushless outrunner motor , 80 A ESC ; 25 kg titanium gear servo, 5000 mAh li-po battery etc. I love the results ;-) Out of the box is just a comfortable platform for endless mods - great to fill up my time as a cripple in a wheel chair
The body looks decent on that thing. Looking forward to it with the mods mate. 💪🏼🔥
I'm sure with a few tweaks it will be much better!
Traxxas trx-4 expensive but it's worth it
Sounds like A-10 flyby with a gun run hahaha, nice looking truck tho and good for a crazy project
My buddy just did a review on this one n ya it definitely looks like the defender trx4. Great review Phil, lots of detailed info on this rig, keep up the good work broski
It looks good, and has enough power to make it fun, even with the bad suspension and steering
Always an interesting watch on your channel Phil! As always, this thing is made down to a price, but some good points in there too. The body looks good, amazed at the chassis flex! I've seen a few cheap and easy mods done to these. Cool to see what you do to it mate.
Cheers Mark. Certainly not the most well build thing I've seen come out of China, but has potential.
@@TomleyRC Yeah, plus it looks pretty! :p
Looks pretty cool! That chassis flex though looks like most the suspension is coming from the chassis flexing! 😂
haha, yeah.....certainly not high grade plastic on this thing!
yup, they should change what they're pumping into the mold(s).
Great and honest review. I bought one myself and I totally agree with your review
Cheers dude.... a few tweaks and it'll be much better I reckon
Nice look at this truck, well done! I’m convinced every package sent by Bangood is used as a soccer ball!😂🤣
haha...yeah, quick game before they send the parcel off.
I'm glad the Samsonite gorilla's have jobs :)
I want one of these, for the money you can't go wrong, as you said, shocks and good set of tyres it will be good, it drives well on stock 😁 fantastic unboxing and a great review video mate 👍😁👍
It's pretty good Tony, a little on the cheapo side, but plenty of fun!
I bought some 4x4 around that size for around 120 bucks including a couple cheap lipo batteries. It had the same kind of parts and cheap springs like that did. The landings were pretty rough. That being said, it had some pretty darn good get up and go! It would run for about 15 minutes on each battery. For the money it wasn't really half bad at all. Downer side was it was too close to my heater and melted the plastic rims. I'd have replaced them, but regular rc rims were too large to fit on it. I ended up putting a bigger battery on it and shorted it out. I ended up tossing it out in the end. I did have fun with it while it lasted.
As long as you had fun, thats the main thing! 👍
@@TomleyRC Absolutely! :D
Great review. Keep up the good work
Cheers dude 👍Lots more on the way.
Definitely looks the part!
Certainly does. And enough power to make it fun
I´d be very interested to see some back-to-back, before-and-after footage of this tackling a series of obstacles with no mods other than trimming the steering linkage, fitting real shocks and swapping to decent tyres...
Yes, hopefully I can get something put together to show the difference. A little back garden trail 👍
I'd even give WD-40 bag soaking the stock tires a try if they can be peeled from the rims easy enough, sometimes its surprisingly good results. edit: if so (peelable)... yes wrap the rims solder+tape, ditch some chassis weights to give it a chance with lower C/G, more flex, and a lower all up weight. cheapo that it is, with some real world inexpensive practical mods, it might do really well.
I started to like rc crawler...good review
Thank you
What a pile.
The body, tires and transmitter is the only thing that looks like a TRX-4
Don’t forget the ratio of Metal/Plastic is the same as Traxxas as well 😂
nice for the price,thanks for the video.
Welcome dude 👍
It does look really good though. Not hard body level of scale, but definitely good enough to join in a trail run! Shame it's small, as I was thinking about a Landy shell for my FTX GEO.
That spring rate and steering knuckles design tho XD It's always funny to see what chinese come up with without any proper r&d ;;;;
Yeah haha... make it look good, and don't worry about the rest!
ALWAYS liked this baby
Yes...and goes even better now with a Hobbywing ESC and better servo/suspension
Good job brother
Cheers dude 👍
@@TomleyRC 👍🤙
Wheelbase is about 10". I'll try that body shell on my Xinlehong 9125 🤣.
Insert joke about friend copying homework and saying “change it up a bit so it’s not obvious”
That's how I got through school haha 😂
Nice. Mine is still on the way.
Hopefully arrive soon! I have given it a good run, and the suspension is probably the worst bit. Lots of power! Lots of fun!
as I can't afford a traxxas . This is going to be my favourite. I hope I get parts for upgrading.
At this price level. Should something break or is just begging for a upgrade your not into it so deep at the initial purchase price. Incremental upgrades and mods on this would be a blast to try. Low risk scratch building canidate.
My brother wants a low cost R/C squirrel feeder.
So this and a home made trailer. Perfect.
Sigh, stupid squirrels......
@@mikeupton5406 Your Brother will like a video I have coming next week. 'Tomley's Nut Taxi' is coming out (MN90 + Trailer)
Great video looks alot smaller
Yeah, pretty small compared to the TRX4
I enjoyed the video. How long is the wheelbase?
Looks pretty solid.
I'd buy this for my son, though you'd catch me tuning/fettling with this while my son drives my TRX4 :)
Yes, it's hard to not upgrade/mod them 😎👍
I would probably go for a "WLtoys 12428 " .. not a prober crawler but a more all-rounder and it's excellent for the money :) . Either way the most important is to have fun.
@@gismo3564 second that, gave my daughter a 12428, she loves it. I dropped an 80t motor in it, cut the foams in half, and am planning to lock the diffs, she does pretty well with it. It can't touch my scx10's of course but she is learning. The thing is bulletproof.
Great video! Love how it looks, seems like a rather good trail truck for the price.
Also , now it only costs something like 68 dollars. Might you know where to get metal parts for it?
Not sure if there are any metal parts mate
Nice vid
Just because it has a Defender body doesn't make it a TRX4 clone. This is just a toy.
They are all just toys dude 😎👍
hello Tom. i am a first timer rc crawler. i want to buy this cheap 1:10 model. but I am also considering necessary upgrades. can you list the transfer/gearbox and differntial upgrades necessary for this model
Dear Phil I hope in your review soon about new ZP models 1005 to 1010
👍
@@TomleyRC mean this that a review is coming?
I have a problem on pinion gear for axle with that trx4 clone😪😁
May have it!
How did you take the video while controling a car? or you have someone to film it?
I record with one hand and drive with the other.... in 'most' of my videos.
should I go for mn90 kit version with upgrades or with this land rover defender 110
I prefer this one mate
How long wheelbase this RC?
Cool cheap entry level truck but I wouldn't even consider it a clone at all possibly a visual copy but not even that. At least that's my opinion. Thanks for the review.
Yeah, not really a clone...but close enough :)
Well I would say is a copy not a clone I would have to say that it would have portal axles and other things like that so hard if you say that is a clone more than a visual copy. I agree to disagree I enjoy your videos. Thank you definitely a copy similar but not a clone at all thanks.
Yeah everyone seems to be a CZcams professional on this one LOL I'm going to step out because I've had over 15 plus years of RC experience to know that one 12 year old kids get mad about stuff they've really need to just step back and listen to things LOL some people just can't handle opinions from other people some people just have to be correct. LOL that's why I like CZcams you get to have your own opinion.
@@kevinpearson3820 All I know is, this would not have got 25k Views in a week if I'd put a less controversial thumbnail & title lol. The CZcams Algorithm made me do it....honest! The Body is like a TRX4, the rest.....is like a cheap Chinese off roader 😜👍
You going to post a future video on suspension mods? I like the price and look of this model, the suspension and flex is quite bad.
Yes mate, full running video is up Saturday, and then the next video will show some mods etc... 👍
looks great unfortunately the build quilty is just not there that chassis looks pretty weak and i know it's not a lot of cash but like you said there are better products out there think the Redcat scout is a better choice great shame was hoping for a lot better great review Phil look forward to the running vids
Cheers Stephen, it's certainly not the best quality. but hopefully that came across on the review.
you were VERY honest in reviewing the unit!
Not bad, man. Not bad at all! I guess with a few tweaks it could be a great crawler! 😃
Great review!
We shall see, the shocks are not what I thought there were, so will need to get batter ones. Upgrades coming soon. 👍
definitely, just 1/4" to 3/8" taller with some softness would do it wonders, same for ditching weight on the chassis and putting weight to the rims instead. hopefully the manufacturer sees comments like this and does some tinkering to improve them as suggested, I get it that the molds have already been created and going new would be expensive plus it'd cause down-time for production. chassis stiffness could be improved with a little different type plastic being injected, going plastic friction damped shocks, longer with lighter springs... MN-D90 style stock cheapo's wouldn't be a mold making nightmare, they ARE a little too bouncy for MN-D90 as got, those would need slightly lighter springs and less clearance for more friction to happen.
How many hours does it run for before the battery runs out??
About 20 mins
Hello, Nice vidéo. The transmission have it with plastic gear or métal gear ? Bye
I think they are plastic 👍
hello ... is it really 1:10 scale? ... in the videos I've seen, it looks a little smaller ... most of the videos are in English and I don't know English, I only use the internet translator. could you tell me if you really have the measures 1:10 .. greetings from chile
Hi Elvis, it's about 1/11th Scale, so yes, it is a little smaller than 1/10 Scale.
Which is better this trx 4 clone or wpl c34
Most certainly the WPL C34, hopefully have one soon
Its ok for flat running. Not good for crawling. Dont hold on hills. Change out shocks a must spend couple more hundred for better crawler.
I've just got back from recording the next video for this, there was no flat ground at all 😉👍
Nice truck for $130!
I was lucky to score an ECX Doomsday Barrage (is gen2) RTR for 100 bucks, a real deal crawler and one steal of a deal. another steal was Virhuck V-01 RTR for 43 bucks from eBay, now has softer suspension, larger crawling rims+tires, and a 48p 10t pinion on its 390 motor. the V-01 WLtoys 12428 clones, metal diffs and full ball bearings btw, are too fast too top heavy, just NOT a racer. as a trail crawler/bouncer/climber it's pretty awesome (TY Steve ShenRC!). it got the "heat-n-twist" to put front king pins vertical, moved steering rod up on servo arm for more torque (slightly less turning travel), so still using its factory electronics.
great review! i might buy this! I'm debating on getting this or a different truck for the price. any suggestions?
This is good, and easily upgradable
@@TomleyRC I ended up getting a mn99! This will be my next purchase after I'm over the 99 LOL
it sounds janky and cheap but runs fairly well
Lol........ Janky........ that's so 1990........
@@kevinpearson3820 uh oh... look out everyone. The cool kid is in town.
@kevin Pearson elementary school playground
@@saltysteel3996 just an observation to a timeline of where people would say that thank you for thinking I'm cool glad to see that you are Captain Obvious on the 1990s comments.
@@3boysrc239 do you even have any RCs or do you just like to comment when you think you can join the bandwagon LOL when you get over 12 years old and can actually hold a conversation about something without thinking you are CZcams professional let me know if my opinion frustrates you it's okay you just have to deal with it........
Hi..
Can you swap the transmission gearbox with axial scx10? Thanks
I don't think so. Its a completely different chassis 👍
@@TomleyRC Ok thanks. My ideas are ruined. Lol
Great unboxing rig looks good. What’s the wheelbase?
Think its 10".... I measure it in the video 👍
Tomley RC Garage yeah in the video you say 10” 1/11 scale. I thought that was a mistake as there selling this as a 1/10
Very stronge
Hello,
Does it come with hexes and wheelnuts like the real trx4?
Looks like toygrade 🙈
The Wheels are 12mm Hex, but the hubs have adaptors. You should check my upgraded videos on this...and my under water one. Certainly a good Toy Grade 😎👍
@@TomleyRC thank's for the really fast reply 😎
I thought it was hobby grade because of the dampers like the trx-4 on the website, but cool that you can upgrade it a little bit 😁
Tell me, the gears inside the metal? Gearbox, bridge ...
Not sure, but I think plastic
HByou know is going to get sued of that truck Traxxas loves the sue.
Brad Kalman haha good luck to them they make more less copies of full scale cars other there and get away with it 🤣
The Chinese are pretty solid with there ‘copyright’ stuff. Traxxas only really have weight in the US
@@TomleyRC Yep
Traxxas needs to downsize their legal department.
Alot of us Texas/former Texas residents would not buy their stuff because of the constant lawsuit nonsense. Their headquarters was right up the highway from me but I don't want to support a company that is always unzipping their fly and getting their lawyer out.
The body shell of trx4 and the clone are same size?
This is smaller than a TRX4
@@TomleyRC It is like oversize WPL and overpriced, all is in outside looks, inside is junky toy, For Same price you can get Redcat E10 of for a few bucks more Redcat Gen7, both real crawlers not this trash. I guess you can't say anything real bad or Bangood will stop sending you toys to review.
I give honest reviews mate, plenty of stuff on my channel that I've given bad reviews. And on this one if you watch the whole video you'll see plenty of times where I say about the quality of it..ie the crap suspension and poor steering. I recommend it for kids to tag along with their parents TRX4 😎👍 Yes, there probably is better stuff out there...and again, I say this in the video 😉
I saw that it was trash plastic gears the steering the shocks
It held up well on the full run. I guess time will tell 👍
Tomley garage i saw on other video how to soft the shocks and wider the steer
Is it the same size same as a TRX4?
Smaller 👍
Can you put a winch on it?
Yes
Ah Walmart quality I love how the ESC is making the motor vibrate
Slightly better than Walmart....but not quite as good as Tower Hobbies 🤫
Looks good
All i hear is traxxs somebody please .tell them they arent the only one to make rc
The shell fit on the trx-4?
Drift Master Smaller than a TRX4 👍🏻
no complaints about its appearance, they definitely should have gone more rigid with the chassis, softer springs and more ride height (longer shocks). if they're going to add WEIGHT, add it at the wheels where it'd help real flex! no problem with softer plastic suspension links if its harder to break something. good review, we know you didn't invent it.
liking MN-D90 here lots more, it got oil shocks and the Fayee 6 spoke rims+tires when built (are wider), with 16 turns 2 mm solder on the front rims helps. it just got a tan colored B-36 type gearbox (low ratio) in it, about 1/2 the speed double the torque, crawls+climbs easier.
The B36 gearbox is such a good design, geared perfectly for the little trucks!
for the heavier ones they're really perfect for single 180 motor power. MN-D90 definitely qualifies as heavier (top heavy too unfortunately). the old WPL stock #316 gearbox: C-24 here is two "69'd" together with a 130 powering each axle, the C-14 (just built) got "HobbyDaddy" dual 130 motors with his "just add a motor" method. "RTR" (RunThatRc) just did a cool video about the swap-ability of WPL type parts, WPL, Fayee, JJRC, etc. JJRC heavier axles and Fayee 6 spoke rims/tires under the C-14 gave extra 3/4" of width, plenty stable for the #316 gearbox dual 130's higher speed (both perfect trail walkers with torque for climbing too).
I know I can't be the only one who commented for several months about the #316 gearbox not having a low enough ratio, is totally fixable if they would re-do counter gear #1, counter gear #2, and the gear on the output spindle, just enough to lose 15-20% of the speed in favor of a little more torque. I'm still unable to locate a source for purchasing the B-36 type gearbox as individual units, if anyone sees, please holler out!!
Heh, well a stock Defender back in the day has a terrible turning circle. So they were obviously aware of that!
It sounds likeHypnotoad
😂👍
Nothing of this looks like a TRX-4.. Yes it looks like a LandRover Defender 110. There are more version of a TRX-4 than the D110.. To be clone the chassis would need to look and work the same
I don't own a TRX4...but I'm sure the body is an exact replica..ie with the external roll cage and red accessories and colour. But yes..the rest is not anything like it.
What are you talking about Simon? I have a trx-4 defender and this chinese cheapo sure is copy of that body with all those accessories
It sounds like a bee hive
haha yeah it does
Doesn't look like a clone to me just looks like a body got used that has been around long before traxxas built the trx4 lmao.
Yeah, not a proper clone, but from the outside it similar... 👍
@@TomleyRC yeah but a proper Landover has all the stuff thats on this rc, on it so it's just another representation of the land Rover lol. With that said it was probably used for sales because it does look like a smaller body of the trx. Perfect for children to have what mom or dad have just cheaper.
Yeah, looks the same but is completely different underneath. I have about 5 different RC Land Rovers, it's a popular body style at the moment
Why does it sound like Darth Vader having a cough....
haha, yeah, that motor is pretty loud on take off!
Pile
Show,,,,,,,,,,,,
Hb toys
It's need shock upgrade
Video Friday ;)
@@TomleyRC Yeah, with soft shock upgrade it will look like real adventure car
Is it real 1:10 scale?
5:29
this is junk for a little more money you can get the FTX kanyon which is actually pretty good
The FTX is ok, but as with anything, you get what you pay for. 👍
just because it looks from the body like a trx4...😂 doesn't make it a clone
What copy ... Man, take your eyes open
oh no, the trx4 is a copy of the real car you know. How dare they do that. This RC car is no copy of the trx4, not much is same design? the shell needs to look like the real car.
IF you want a budget RC crawler hobby grade and not a toy like this watch for Saturn electronic market Carson MB MC 10 99 Euro .
Would've sued them
Only in America 👌
Good review, bit too cheap little child toy !
So this company can literally copy an entire car and traxxas does nothing, but when ARRMA uses a similar suspension design they get sued?🤔
Jamie Fehr Yeah, the Chinese are pretty much untouchable on this sort of stuff.
🌷💕💕💕👍🏻
I really wish people understood the difference between a clone and a knockoff. This is NOT a clone of a TRX4, it’s a knockoff. A clone will be a copy with parts that are interchangeable between the two. A knockoff looks like another RC but doesn’t have parts that are interchangeable and is meant to fool people into thinking they’re getting something that they’re not. You’re only helping that dishonest practice by calling it a clone instead of a knockoff.
I really like you and your channel, even subscribed so I think it's fair to say: DAMNED YOU FOR USING A CLICK BAIT TITLE, it's not necessary.
It’s really not click bait, the body is an exact replica of a TRX4...just a little smaller. A click bait title would have been ‘$129 TRX4’.... making you think it was a real one for $129 👍🏻👍🏻👍🏻👍🏻. I try not to be to ‘click baity’ but unfortunately with CZcams you need to really try and sell the video....
@@TomleyRC like others have said, it's not a clone. The HG P407 is a Bruiser Clone, The RedCat Everest 16 is an Axial AX10 clone, The JJRC32 is a Losi Micro-T clone.
Not a clone.
Clone - someone or something that looks very much like someone or something else.
@@TomleyRC it does not have a 2 speed tranny, portal axles, or lockable diffs...the defining features of the trx4. this a generic scale crawler w no special features, so its a 'clone' of dozens of other that models stretching back 10+ years.
good youtube channel but a lousy video title.
@@jtet9559 Unfortunately you have to try and be creative with titles and thumbnails, otherwise your video just gets lost amongst the millions... I try not to be to 'click baity'...but sometimes you have be a little to get people to click on it. I watched another video of this before I got mine and every other comment was 'It's a TRX4!'... 'it looks like a TRX4'...etc... so makes sense to label it like I have done. I know it's nothing like a TRX4 apart from the body. Cheers for watching anyway. 😎👍
I like your videos but seriously, I have to take issue with you about attributing shipping damage to china as if they were the only party handling the delivery all the way to your door. I am not from china but this is just irritating as it is not fair. I have plenty of parcels damaged by Royal mail and USPS. So ya.
If I order 100 items from Modelsport in the UK, and 100 Items from Banggood...I reckon maybe 1 would be damaged from Modelsport and probably about 30 from Banggood. It's completely fair to attribute the damage to China Post, as well as the lack of packing from the companies shipping them out.
try driving it scale. i bet it cant
Drives ok 👍🏻 czcams.com/video/ohCF5UMjVPw/video.html
Junk . It's scream sweet sour chicken lol but you know they're all made in Taiwan and China
Piece of junk with a decent body. Only related to the TRX-4 in that is has four wheels.
four wheels.....and it's mostly plastic... don't forget that part, oh... and made in China 😬
No thanks, way too much plastic.. especially the axle gears.
No fake nothing ...have enough problem from well known companies.....lame
Some classic china cheap shit... but looks good :o)
Completely useless, but looks good.......which can be said for my 'Reality' TV stars 😂
Crappy