Excellent video. Thank you for doing this, as now I have heated grips! Two cautions to those installing. One. is make sure you get the 130mm versions (for the BV350, or at least mt 2021). Two, don't glue the grips on until you make sure the left grip clears the blacxk/driver facing plastic from the dash. It's easy to push it on too far and have there be interference with the heating controls.
Thanks very much for the educative video. I personally will never ride under 5 degrees so I don't need the heated handle grips but the video is very useful indeed.
Installed my Koso Heated Grips this weekend. This video was a fantastic aid. Thank you so much. On another note: would love to see a video that addresses the spark plug cap failure issue that seems to be troubling the BV 350.
Thanks so much! I needed to see how to remove the dash plastic. Mine has bad fading from previous owner. is it possible to do a video for removing the entire Glove Box Assembly? I want to get them all of to try plati diping them
It's not to do with heated grips but I have a BV350 and I crashed the front end I've repaired it but the traction control needs to be switched off every time I ride otherwise the power gets cut when accelerating, would you have a idea of what I could do ?? Thanks
Great! They really make a difference even in mild climates like we have here in SD. Glad you tackled the install. We use those posi taps all the time, they make it so easy!
Hi. I have a Beverly 200cc. and I want to check the regulator because it does not keep the battery charge. and I would like to know. where the regulator is placed on the motorcycle. and if you have a bordeaux that you recommend me better
Thanks Robot. As a BV350 owner, I'm looking forward to more videos. You once said you would do a kit to move the turn signals down to the running lights. Any plans on doing that?
Shims? You CAN trim the grip a little as well. Oxford grips give you a limit as to how much you can do this. Comparing to the original in length, you can see if and how much it needs trimming.
Good day. Hello to you from faraway Kazakhstan. If it is not difficult to tell me please. I have a Piaggio ZIP engine 125 carburetor. I want to install it on the Vespa LH 50 2t scooter. Which sdi switch is suitable for starting this engine ????. In addition to the ACI503. I will not have an immobolizer. Thanks for answering.
Oxford intelligent heat grips are the best on the market. In the dead of winter cold as ice the heat grips get amazingly hot. No messing around the heat grips wires connect straight to the battery, the intelligence system cuts the heat grips terminal off if you forget to turn heat grips off.
This video saved my ass! Thank you!!! I will make a point of swinging by the shop to thank you personally should I ever find myself on the Left Coast. Maybe I cater in donuts for the techs remotely instead?
Robot said this is a Givi windscreen? I really like the windscreen pictured, but the Givi's for the BV350 extend wide over the grips (which looks ugly imo). The closest to this I've seen online is a Dart Flyscreen, but they don't make them specifically for Piaggio. Unless the one installed was meant for another bike?
Excellent video. Thank you for doing this, as now I have heated grips! Two cautions to those installing. One. is make sure you get the 130mm versions (for the BV350, or at least mt 2021). Two, don't glue the grips on until you make sure the left grip clears the blacxk/driver facing plastic from the dash. It's easy to push it on too far and have there be interference with the heating controls.
YES! BV350 video! Thumbs up. More please :)
Thanks for posting this. Love my bv. Would like to see more videos featuring them.
Thanks very much for the educative video.
I personally will never ride under 5 degrees so I don't need the heated handle grips but the video is very useful indeed.
Installed my Koso Heated Grips this weekend. This video was a fantastic aid. Thank you so much. On another note: would love to see a video that addresses the spark plug cap failure issue that seems to be troubling the BV 350.
Did you use the 120mm or the 130mm ones on your BV350?
@@infinitydreamzz Honestly don't recall. I simply ordered the set that Vespa Motorsport was selling.
Thanks so much! I needed to see how to remove the dash plastic. Mine has bad fading from previous owner. is it possible to do a video for removing the entire Glove Box Assembly? I want to get them all of to try plati diping them
It's not to do with heated grips but I have a BV350 and I crashed the front end I've repaired it but the traction control needs to be switched off every time I ride otherwise the power gets cut when accelerating, would you have a idea of what I could do ?? Thanks
Thanks 4 your really good video was a great help to me
Glad it helped
Good work! Can you do a tutorial on the bv 350 for led or xenon lighting?? Looping forward to it
did this today ! thank you Robot! also Love the little tricks !
Glad you liked it!!
Did you use the 120mm or the 130mm ones on your BV350?
@@infinitydreamzz cant remember long time ago, i follow the video.
Solid video Robot, thanks! Just installed those on my LX150 2009. Good quality product and those wire taps are a life saver!
Great! They really make a difference even in mild climates like we have here in SD. Glad you tackled the install. We use those posi taps all the time, they make it so easy!
Hi. I have a Beverly 200cc. and I want to check the regulator because it does not keep the battery charge. and I would like to know. where the regulator is placed on the motorcycle. and if you have a bordeaux that you recommend me better
Good stuff...
Thanks Robot. As a BV350 owner, I'm looking forward to more videos. You once said you would do a kit to move the turn signals down to the running lights. Any plans on doing that?
SUPER VIDEO !!!
Shims? You CAN trim the grip a little as well. Oxford grips give you a limit as to how much you can do this. Comparing to the original in length, you can see if and how much it needs trimming.
Good day. Hello to you from faraway Kazakhstan. If it is not difficult to tell me please. I have a Piaggio ZIP engine 125 carburetor. I want to install it on the Vespa LH 50 2t scooter. Which sdi switch is suitable for starting this engine ????. In addition to the ACI503. I will not have an immobolizer. Thanks for answering.
Thanks for your video, I wanted to ask you how to disassemble the mirrors?
What tools do you need?
Thank you
Oxford intelligent heat grips are the best on the market. In the dead of winter cold as ice the heat grips get amazingly hot. No messing around the heat grips wires connect straight to the battery, the intelligence system cuts the heat grips terminal off if you forget to turn heat grips off.
This video saved my ass! Thank you!!! I will make a point of swinging by the shop to thank you personally should I ever find myself on the Left Coast. Maybe I cater in donuts for the techs remotely instead?
Amazing
Would like to see a video about the new Piaggio Medley!
Robot said this is a Givi windscreen? I really like the windscreen pictured, but the Givi's for the BV350 extend wide over the grips (which looks ugly imo). The closest to this I've seen online is a Dart Flyscreen, but they don't make them specifically for Piaggio. Unless the one installed was meant for another bike?
Would this work for a Piaggio Liberty 150?
plase do more videos on the bv i just bought new piaggio beverly 350 today :)
Do another aftermarket exhaust installation video.
Per favore posso sapere la marca del cupolino montato su questo Beverly??? grazie
GREAT!!
Dove posso comprare queste manopole riscaldate x il Beverly 350 del 2020
Great Video but no much use for heated grips in S. Florida but could you do a "Plastics Removal" for a BV 350...?
I would like to see one of these too
Morning time in winter is cool
Hello, would they also fitt on a 50cc piaggio scooter? If not, what would you recommend for 50cc piaggio scooter.?
If it has a 12V power source, these grips are more or less universal.
I'm not in the US so I was wondering if these are the 120mm or the 130mm ones? Want to install on a BV350
Need the 130s for the BV350
Instead of using epoxy I use brake cleaner - it allows grip to slide in. When brake cleaner dries out you can not move the grip. No glue needed.
Nice tip. We'll give it a try!
@@VespaMotorsport It's even better with hair spray ;)
What are those easy wire connectors called so one can find them on Amazon or ebay
Easy splice wire connectors who manufactures them
How reliable are the koso grips compared to like Oxford??
Tip, don't put adhesive into end of grip, it can get pushed between throttle tube and handlebar, don't ask me how I know 😳
Plss make videonabout plate holder :D
MN here, it's not the temp, its the ice.
What kinda wimp needs heated grips in SD?😜
Perhaps someone who's still out riding when you're home under a blanket in the winter...
@@nikos-giorgos
Good 1.
Am might me the only youngest here super intrested in these bikes!!!!!!!!!!