How-to remove orange peel without sanding (Step-by-step Guide)

3 years ago, we've posted our first video on removing orange peel without sanding ( • Auto detailing - Remov... ). However it was just a very rough demonstration video.
This time, we've done a step-by-step video guiding you through how we remove orange peel here in OSREN without sanding.
Here are some of the tips to take note!
Tip 1:
Use masking tape to mask off unpainted plastics, edges, rubber trims, and panels that bulge out (i.e. door handles & skirtings).
Tip 2:
Prime the pads before use. (For new pads only)
Tip 3:
Work small section at a time.
Tip 4:
Use 600rpm to spread the polish and 1400rpm to buff.
Tip 5:
Use reflections or fluorescent tubes as guide.
Tip 6:
Don't apply too much pressure on edges & curves. Apply pressure on flat panels.
Tip 7:
Go for 2nd pass if necessary.
Tip 8:
Lower down the speed for tight areas.
Tip 9:
Finish up with polish and glaze.
Tip 10:
Clean the denim pad with masking tape's core.
Products available at Amazon:
OSREN Denim pads: amzn.to/2Kg5Z1N
OSREN Perfect 50: amzn.to/34YOGtX
For more info:
OSREN Perfect Fifty :
osren.com/prod...
OSREN Jeans Sponge:
osren.com/prod...
-------------------------------------------------
Follow us on:
Facebook : / osrenmalaysia
Instagram : Osren Malaysia
Website : www.osren.com/home
E-store : e-store.osren....