Paint a car in your GARAGE like a pro!
Vložit
- čas přidán 28. 10. 2023
- In this episode, I'll share how to paint a car in your garage like a pro. I'll share tips and tricks on how to spray basecoat and clearcoat along with what you need to know when painting at home.we take a look and demo a diy budget automotive paint gun for small compressors. I'll go over some of the many benefits of painting your car with a lvlp paint gun and why these guns are perfect for hobbyists and anyone painting their car at home without a paint booth.
CHECK OUT MY OTHER HOW TO VIDEOS
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
paint gun and clear review playlist
czcams.com/users/playlist?listj=PL...
how to color sand and buff like glass
• Beginners guide to wet...
Autobody repair made easy
• Auto body repair made ...
how to prepare primer for paint
• How to prepare a car p...
using body filler to repair a dent
• Using body filler to r...
How to repair body damage on your car
• How to repair body dam...
My amazon affiliate store : Tools and materials categorized to help you find what your looking for
CLICK HERE
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
www.amazon.com/shop/garagenoise
As an Amazon Associate, I earn paid commissions from qualified purchases.
In this video
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
yt 160 lvlp paint gun 1.3 base/clear paint gun
amzn.to/3Qitr0z
finish1 fc710 spot panel clear
amzn.to/3M1ahd4
low cost disposable cup system 1.0
amzn.to/3PfhKWs
astro sun light
amzn.to/3YbFFtT
premium tack cloths
amzn.to/3FK35zw
prep solvent
amzn.to/3FCoRl7
raven latex gloves
amzn.to/3BsiGBb
3m paint mask
amzn.to/3UP7NQP
70% isopropyl alcohol
amzn.to/3uCCy0F
If you find this video helpful, be sure to let me know in the comments. I welcome your feedback and questions
SUPPORT THE CHANNEL
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
LIKE AND SHARE VIDEOS
SUBSCRIBE!
COMMENT!
AFFILIATE LINKS!
www.amazon.com/shop/garagenoise
Business Inquiries: okpaintworx@gmail.com
Follow us on Instagram and get the scoop on upcoming projects!
/ garagenoise247
Follow us on Tik tok
vm.tiktok.com/ZMeV1et9D/
video equipment I use
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Rode wireless go
amzn.to/3xpJDAW
Dji osmo action
amzn.to/3cCjdUD
Disclaimer:
Due to factors beyond the control of Garage Noise, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Garage Noise assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video's. Due to factors beyond the control of Garage Noise, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Garage Noise. - Auta a dopravní prostředky
Lovely finish on those panels Chris it always amazes me how you manage to get such clean jobs considering you don't have a booth but it just goes to show that you don't need a $50k state of the art booth to get a clean job, thanks as always for all the detailed info you include in your videos👏🙏👍John UK.
Nicely done
Great video. Thanks for sharing
that clear looked slick,good job and good video
Thank's brother! Appreciate the comment and support.
Very nice looking work 👌 👍
Great finish you achived here, very helpful information also👍 Thanks for sharing this information on the video, 👀 Sharp 😊😋😎
Glad you enjoyed it
No question this time just want to say what a beautiful job the white peal came out.
Oh yes you haven’t mentioned what other cleaner you use beside alcohol? Drop me some names.
Prep solvant, also spray away glass cleaner for a waterbase cleaner.
amzn.to/3u2YvsN
amzn.to/47mtbn9
Looks good to 👍
Very nice. I like it cause I am learning and have a Rongpeng 700 lvlp gun. Watched so many vids and starting with small projects. All the way from South Africa.
👍
Good job 👌👌👌
Thank you so much 😀
Awesome
👊
Looks great, clear looks awesome what kind of clear are you using? Thanks
Finish1 amzn.to/3smImh7
Amazing job, what will you recommend for r500 gun settings at 65 degrees and mixture ratios for primer base and clear coats, thank you
Amazing content sir! When painting around 50-60 degrees temp, would you bump the air pressure to 20 psi? or just play around the settings?
For basecoat? I would play around with it for base , I error on the side of less pressure for base ,but it needs to be smooth. For clear in cold tenps 30psi and less fluid, thin wet coats is what you want
Have the itch to get to painting projects...........just snowed here....ARG! >.
It addictive, where you at? Step daughter's flight just got canceled coming from Colorado.
Up here in Western Chinada........cough cough I mean Canada.........snowed for the first time this last week and its staying; wont be able to paint for another 6 months now. Very addictive hobby and I have way too many cars needing attention >.
Any tips for preparing a roof with paint damage? The paint is cracking and I want to practice on it for my first spraygun attempt. Your videos are very helpful
It's all about the prep, not the painting, sounds like you may have to go back to bare metal with your roof if really as bad as it sounds
@garygreenwood3995 meant to say the clearcoat is fading/ cracking. Base seems ok, but I guess until I start sanding on it will I see how deep i it goes. It's the typical nissan Altimas clearcoat fail on roof/ upper panels.
Thank you for the guidance
It looks like you have a natural cross draft to keep the over spray down.
👍pretty much!
how long after your first coat of base could you use a tack cloth? after flashing or some time after it flashes?
It’s 45F where I am right now. Maybe alcohol as a reducer, then light it on fire when you’re done to raise the temperature? :)
On a more serious note: winter is here where I live. Is it actually possible to paint at 50F without compromising quality too much? I’m not in a rush, I don’t care if I have to wait awhile to add the next coat.
I paint in 55 degrees all the time but I try to heat up the panel with a infrared lamp.
@@GarageNoise Thanks for the suggestion and sharing your experience.
One of the things I am going to paint is part of the frame of my RV. Should be pretty easy to use a heat gun to heat that up. Some of the paint on it is flaking off and I’d like to get it cleaned up before it gets attacked with road salt again.
Die grinder with a 2” surface conditioning wheel, spray with Dawn and water, then water, let it dry, then Rustoleum rust reformer followed by Rustoleum glossy black is my plan.
My fiberglass bumper is also cracked, but I might wait till spring for that. It won’t get worse the way that metal does.
Prep question. I'm doing a bumper change, and the used bumper I have a dark purple, and the color will be changed to a white. How would I prep the bumper for that color change? I do know I need to sand, but will I need an adhesion promoter? Should I just smooth or get the old color off by sanding or stripping? Any other suggestions would help.
Send prep no need of stripping ,use 2 coats of grey primer
What is on that bumper cover to start with? Is that just scuffed up OEM paint or scuffed up primer?
That is primer thats been sanded with 600
Exhaust system Chris a fan or what or just leave the garage open.I have a Double garage which would be the best for me a good extracting fan or what cheers love the clips helps so much A1.Phil in Australia.
If it warm enough I leave the doors open. I do use a explosion proof exhaust fan I got off amazon. It works ok enough if I need to keed the doors closed.
Cheers Chris so if keep doors closed purchase that exhaust fan yes as around me there is 5 villas or single level great people but best for me to keep garage door shut have a back door from garage which I can keep open that should work yes.@@GarageNoise
If you've already cleared a panel but it ended up being too dry (most likely all coats) can you sand it and only reclear it? Or do you need to repaint with base as well?
You can sand and clear.
When painting a car u have to see if it’s a 1 stage or 2 stage or tri how do u find out ? What it is and u have to do also for base coat what’s it used for do u primer then base coat then your paint ? What’s base for
You can find out if it's a tri-coat by contacting a local paint supplier with the cars color code. I have several videos on preparation for paint and primers. Check out my channel and the different playlist. Base is just the color pigment there is no protection without the clear coat.
Hey man! Which gun would you recommend for me to get? The R500 or the A610? I heard they have different air caps
They are essentially the same gun different design. I prefer the yt160 cause the color cleans up easier than the a610 and it comes with the series 1 pps adapter for this gun.
amzn.to/3QfiZ8Y
Where are you located…wish I could apprentice at your shop😢
Oklahoma!
I know absolutely nothing about auto painting but my car collection is growing and it’ll be too expensive to paint each one. I’m looking to get an Ingersoll Rand 2340L5-V. Do I need a dryer and compressed air line filter?
It's nice to have a dryer but not absolutely necessary. Definitely want a inline filter water and oil separator with dessicant beads. That's all I use I change beads before each paint job.
How do you spray in winter w an open garage so big? What lowest temp you can spray?
I'll be making some content on this. I have some exhaust fan and curing lamps that really help in the winter.
@@GarageNoise perfect,thanks👍🏽
Currently unavailable
Are both guns avalable at eastwood
No, the lt 100 is easwood gun. I have links in the description for the yt160. The two guns internally are the same gun the yt160 has an updated appearance. The yt160 is half the price.
I have this gun, just under another name. What settings would you recommend for filler primer? I just tried a test panel and it laid down like rhino liner. I know there could be many variables but no matter what psi or fluid volume I used it didn’t seem to help. Thanks!
What cap and needle set are you using? For thick filler primer you need a large tip 1.7 or higher. Full fluid about 24psi is a good base setting. Hope this helps! Appreciate the comment!
@@GarageNoise I used a 1.7 tip, as it’s the largest that came with the gun. I’ll try to bump up the PSI on the next run and may thin out the primer a bit. I’m also seeing a pretty big drop in PSI between the first trigger pull that’s just air and a full trigger pull with fluid. Maybe a full 10psi drop. I assume I need to set the PSI based on the full pull?
@@robhudson86 might try to lower the fluid volume as well this should help to atomize primer better.
In every apply base coat, we must to sanding 1500 to remove dust or no need ?
I think what your asking, is do you need to sand between every coat of base. The answer to that is no. The only time to sand base is if you have dirt in the base and then you just lightly sand out the dirt and apply another coat of base.
Ok thank you bro for the info
Bro do you a video of smart repair on engine hood pearl white color? Thanks
Using aerosol
Great finish,when I finish a panel it looks great but then go orange peel when it dries,why is this?
That's happened to me before. It has to do with the speed of drying. Are you force dying it like baking or pulling it ot in the sun? That could be one thing. Some clears also dye back a bit so it might have something to do with that. Activator speed could be part of it. If at all possible I like to let the clear dry on it own with a slow activator if possible. I know it's getting cold so that may not be an option.
@@GarageNoise hi thanks for your reply I think I used fast harder and the garage was 15 degrees,I will have to try a slower hardener
That gun is currently unavailable any suggestions on something else similar?
Here's a couple options these are all the same gun amzn.to/3SYAOw0
amzn.to/3T4vnM2
Thanks heaps 🤘🏽
Thats not a very expensive gun!
👊
Great job