Thank you.. If you can upload new tutorial for how to build Vlan between 2 or more different separate mikrotik routerboard,to pass anything of services between devices.
You create a Bridge for example called Trunk port 2 3 4.5 You then point the vlans under interface to that bridge you created... Then finally add ports 2 3 4 5 to your bridge
This config isn't for creating a router and vlan 9n it, thats for accepting the vlans on a specific port and remove tagging for access on other ports. Simple switch thing. Majority of the videos never teach you anything. Routerboards can route and switch at the same time so if needed i can make a proper video about it
It was painful watching you struggling with paint, but the video had exactly the information that I needed. Thank you!
it's paintful xD
Лучший гайд по настройке Vlan для 6.41 и выше.... Просто понятно и главное все работает !
Thanks for usefull information. This is helped for me. Simple and useful best tutorial
When you assigned ports to the new bridges you created, how come you didn't use the vlan tab?
Selamın Aleyküm. Sade ve güzel bir anlatım olmuş. Teşekkürler
Thank you.. If you can upload new tutorial for how to build Vlan between 2 or more different separate mikrotik routerboard,to pass anything of services between devices.
Will try once free time
Phalla CCMT
Thank you
also, does this work on the Hex device?
Here's my question, how to do setup a trunk port on ports 2 3 4 or 5?
Also, do you have to set the WAN as a trunk port when you VLAN out 2-5?
You create a Bridge for example called Trunk port 2 3 4.5 You then point the vlans under interface to that bridge you created... Then finally add ports 2 3 4 5 to your bridge
can you help me ? multiple pppoe client on single wan interface in mikrotik
thanks!
There are usefull geometric figures in paint, in case u didnt know. Also clicking is very annoying
thanks it's helped
Hello, how can i make a seconde trunk port with vlan10, 20 and 30 to a switch?
Thanks
Attached vlan 30,20,10 in a bridge and bridge to whatever port you want trunks.
When I add the bridge for the access port, I get red text in DHCP server stating that slave port cannot be used for DHCP :(
This config isn't for creating a router and vlan 9n it, thats for accepting the vlans on a specific port and remove tagging for access on other ports. Simple switch thing. Majority of the videos never teach you anything. Routerboards can route and switch at the same time so if needed i can make a proper video about it
it's ok, but can not setup dhcp on interface eth-1_vlan10
MegaBoring
WAN is from another RB?
Who give IP Address to vlan 10 and Vlan 20
Edzal Ahyat bbbhvv
Hey where did you assigned the ports in vlan what a waste of time
Bad vid, you need to set IP addreses and other things you don't show. That won't work for sure.
what about trunk ??
Assalaamu 'alayk
Talk
Very unprofessional
Do not watch then.