Air Compressor Hoses: What Type of Hose is Best For You?
Vložit
- čas přidán 3. 06. 2024
- In this video, Jamie goes over all of the different types of air hoses that are available for your air compressor. We go over the strengths and weaknesses of each type of hose and what to watch out for when you are purchasing a hose for your compressor. You can view and purchase all of the hoses featured in this video at www.compressor-source.com. Feel free to email us at compressorsource@gmail.com or call us at 1-888-396-8676.
- Auta a dopravní prostředky
Very informative and the best air hose comparison video on CZcams. Thanks for the video and clearing some things up for me. Subscribed!
Thank you so much for your time, God bless you.
THANKYOU VERY MUCH .THIS VIDEO HELPED TO ME .IM IN RETIREMENT PROCESS AND I HAVE BEEN COLLECTING NEW TOOLS FOR MY CARPENTER SHOP AND I BOUGHT MY BOSTITCH AIR PORTABLE COMPRESSOR
One useful trick is using large hose for flow but having a few short, flexible "whips" or "pigtails" to make spray gun or tool handling comfortable.
Thanks for Adding your knowledge.
Thanks for the information presented in this video. I’ll check out your website!
Nice video. What hoses do you recommend for RV use in general (airing tires etc.) and especially for blowing out RV water lines in cold climates? Thanks!
Right on. Great breakdown.
My PVC/Rubber Hybrid works great. Built many homes with it.
We buy bulk flexzilla hose and use it in a industrial factory and we always have a problem with the ID of the hose strecltching out over time and eventually our fittings just fall out of the hose, probably fine for pressures under 100 psi
Looks like the rubber hose is the way to go. Thanks for the video.
Job well done!
Great video. I love my Flexzilla 50' hose and was about to buy a 100'. Thought I'd look up what's best and found this video. I'll probably get it but will check out the Prevost hose. Thank-You for the comparison!
have a 50' Flexilla hose in my shop. I don't use it a lot, so it hangs on a spool on the wall. The spool has about a 8" radius, it is a garden hose hanger. The hose has developed a memory of that spool and it is near impossible to rehang it cleanly. I am switching to a different hose!!!
I was using PVC air hoses, but it wasn't the stiffness that bothered me. Air compressor oil will soften the end and make it leak at the crimp. Usually on the air compressor side. I seldom paint and need quick recovery. Oil-free compressors probably wouldn't bother the hose, but they're slow to charge back up. I'm changing car tires, sanding, and grinding mostly. Is rubber my best option?
thank u so much..
Thanks
Ridgid has a fabric lay flat air hose that's supposedly doesn't have any of the drawbacks of previous hoses. Would have enjoyed hearing about that.
great presentation, thanks for all the info.
The free ones are the best!
Harbor Freight Specials...Whoo Hooo!
Come by my house. It's laying out in the yard free to a good home. Leaks a little around the crimp. Good news, it acts like a swivel now!
I've never found a hose that lasts more than a year. Is there any metal air hoses out there?
I need help. My friend gave me his 6 gallon Porter Cable Air Compressor. Has no hoses or fittings with it. What do I need to buy and what size? It’s a model C2002
What is the best diameter air compressor hose for general purpose use? 3/8" or 1/2" etc.?
Great Video! I am a furniture maker and spray a lot of lacquer in my shop....What would be your recommendation????
A polyurethane hose would be easiest to clean. Painters most of the time use that type.
I'd recommend a _really_ good mask + NO gas water heater!
how do nylon air hoses compare as far as in cold vs hot weather and durability?
How much pull back does that poly coiled house have? That's something to consider if it pulls back too strongly, the PVC coil hoses are very annoying if you actually try to extend them beyond the coiled length by more than a few feet.
I have a ¼" one and it's not bad. The ⅜" one tries to spring back, especially if you set your air tool down.
I detest those hoses.
Can hose diameter be too big for a compressor. Just bought a 4.1 scfm compressor and I mostly use stapler and brad. But I will have occasionally need for framer and impact without repetitive use. Will a 3/8 over work the compressor for mostly stapling and will a 1/4 leave me short on power to drive a framer or impact?
3/8" is best overall hose.
Can you use either the rubber or hybrid air hoses as a water hose? I wanted to use it for car detailing instead of the polyurethane to avoid the coiling.
Probably too late a year later, but, Flexzilla makes a water hose that comes in different lengths as well. We're talking some good stuff, Maynard
You should have links to each hose.
I was always told the poly hose is what you need as a carpenter and I’ll admit that they are tough but they are harder to roll out and roll up. It’s not the biggest issue but u can’t just wrap it up like a power cord all easy how ever you want, I love pvc personally it cheap,flexible and easy kinda like my taste in women but I recently stole a dewalt hybrid from trim and finish crew (they had it coming bunch of A holes, I don’t feel bad about it whatsoever) anyway it’s quickly becoming my favorite n go to hose .next time I go to buy a new one I’ll get a hybrid hose not a dewalt tho I’d be more than happy with a harbor freight one
Why not just steal your next hybrid hose from harbor freight? You are a thief after all...
Good video, had no idea that there were so many options. On my last job the boss would always buy 'Do It Best'' bargain bin quality air hoses...every time I see that name now, I get pissed off.
I’m about to toss my bright orange PVC hose and look into Prevost!
I have a few PVC air hoses but because they are not super flexible I use them on long straight runs that I don’t move often and also use them between surge/air pig tanks on the high pressure side of the regulators. Then use super flexible hoses from that tank after the regulators.
Hi !!! I have Makita Air compresor 2400 -4.2 Gal-2.5 HP - can I used for air spray things like tables , furniture , with the Polyurethane coiled air compresor ? Also where can I order the Air Polyurethane coiled air compresor hose?
Thank you '
Bronx, N.Y. 10454 -
Im so happy to get you valuable Information.
Amazon has a good selection of all of the hoses he talks about here. Your hardware store like Lowes do have a selection of these different materials.
What about for breathing air hose?
👍👍
Which is the most oil resistant? I work in an automotive shop and there’s ALWAYS oil, coolant, or transmission fluid residue on the floor and my coworkers have the bad habit of leaving the air hoses on the floor, and the hoses absorb the oil and get a nasty sticky texture and then soften up and leak.
I would think polyurethane, definitely NOT rubber.
Problem I had was the compressor oil eating the hose up from the inside. Maybe I need to use a moisture trap. I'm sure that gunk's not good inflating tires.
Mount a reel. Problem solved
Good year sucks mine popped I repaired it and popped somewhere else I've fixed it 3 times I'm done
links
I ordered a 100ft poly hose for 26.99 and when I picked it up it said pvc on the packaging. It looks exactly like the polyurethane hose you showed. It was from northern tool. I haven’t taken it out do you think I’ll be okay? I’m in Texas so it doesn’t get cold much at all here it’s just for diy stuff at home
I'm concerned about the weight of a coiled hose when it hangs. Its almost like having triple the weight (I'm imagining).
have a 50' Flexilla hose in my shop. I don't use it a lot, so it hangs on a spool on the wall. The spool has about a 8" radius, it is a garden hose hanger. The hose has developed a memory of that spool and it is near impossible to rehang it cleanly. I am switching to a different hose!!!
@@mr.p9882 I almost picked up a flexzilla but, I always see enough negative comments about it to make me shy away.
@@mr.p9882 Do you have any recommendations for a reliable hose?
I'm just getting into my own business and my budget is tight (I can afford something expensive IF i only need to buy the one.) I know my tools pretty well just not the peripherals like hoses and such.
Main use for the hose is Framing. 70-120 psi on a metabo HPT NR83A5.
I don't really trust the hose that was bundled with the compressor, psi rating of 150.
I've been struggling with a PVC air hose for years. I think it's time to pick up a Flexzilla and throw that PVC hose in the trash.
I have a few PVC air hoses but because they are not super flexible I use them on long straight runs that I don’t move often and also use them between surge/air pig tanks on the high pressure side of the regulators. Then use super flexible hoses from that tank after the regulators.
Just get the flex or rubber and make your life easier
Always gettin different views heard 1/4 at 75 ft would make air tools run better
Never buy anything that has plastic as a fitting,, or plastic before a fitting. Junk!
If you shoot a nail thru your hose you don’t need to repair the hose you need to find a new job.
I can't believe how bad this is.
Vgreat inromative video, enjoy it. But why do Americans speak English when they end up butchering most words. "polymier"? .. Polymer "paa·luh·mr" is how you say it. Tried ignoring it but it's so annoying.
It’s called an accent. There are many different accents in USA depending on the region
Really dude? A 20-second intro + having to listen to you say 'Uh' or 'Umm' _literally_ *every single time* you pause or start a new sentence?? Umm, yeah...no thanks
Umh… are you unsure or just BSing us. Sorry, that’s the perception that’s implied, when people use the words… umh, ah & ahh’s!
👍👍