Backup camera Installation 2009-2013 Mazda 6

Sdílet
Vložit
  • čas přidán 25. 08. 2024

Komentáře • 23

  • @DetectiveMcGarnacle
    @DetectiveMcGarnacle Před 2 lety

    Exactly what I needed. I was wondering if I would have to drill a hole or not. Thank you

  • @CH-tt1jg
    @CH-tt1jg Před 6 lety

    How do you make your interior matches the color of your car seats? It looks stunning!

  • @weiyanyin3801
    @weiyanyin3801 Před 7 lety +2

    Hi, how did you wire the camera to the HU? It is not mentioned in the video.

    • @gigi19mai1
      @gigi19mai1  Před 7 lety

      It is mentioned in my previous video - :"Eonon Android + front view + rec cam installation 2009-2013 Mazda 6". The yellow male video jack from the camera gets connected to the female yellow video jack from the stereo. For the older stereos with the extra wire for the automatic back-up you will have to connect the little red wire from the camera. Not in this case, the stereo does it directly.

    • @weiyanyin3801
      @weiyanyin3801 Před 7 lety

      So for the RCA cable, the red wire (reverse trigger) is not required to be connected anymore? Thanks a lot!

    • @acdcdiy8290
      @acdcdiy8290 Před 6 lety

      Same question. What do I do with the little red wire?

  • @ciaranclaffey5639
    @ciaranclaffey5639 Před 5 lety

    You are some impressive man

  • @nickfelix1408
    @nickfelix1408 Před 4 lety +2

    So nobody gonna tell what to do with the red trigger wire that stick with the camera plug that suppose to connect to the radio.

    • @gigi19mai1
      @gigi19mai1  Před 4 lety +2

      The red wire next to the yellow jack gets connected to backup blue wire from the stereo. That sends the signal to camera.

  • @AmitThakorlovemeorhateme

    You just didnt show how you traced the wire from the trunk to the front (from the left side or right side)

  • @gzrgldr8288
    @gzrgldr8288 Před 6 lety +1

    What brand of camera is that, and how is it holding up?

  • @andresinclair7219
    @andresinclair7219 Před rokem +1

    The wire should go through the grommet not around it

    • @gigi19mai1
      @gigi19mai1  Před rokem

      I mentioned that in one of the videos. Doesn't fit!

    • @andresinclair7219
      @andresinclair7219 Před rokem

      @@gigi19mai1 I've fitted dashcams andcanerasfor years and never had a wire that wouldn't go through

  • @riazraj173
    @riazraj173 Před 3 lety

    How much

  • @albertasa6927
    @albertasa6927 Před 6 lety

    Does the eonon also fit in a 2008 (may) mazda 6? Is the wireing the same?

  • @jaliesawashington4551
    @jaliesawashington4551 Před 3 lety

    What radio system is that ????

    • @gigi19mai1
      @gigi19mai1  Před 3 lety

      Eonon

    • @jaliesawashington4551
      @jaliesawashington4551 Před 3 lety

      The sides/spacer came with it ?

    • @gigi19mai1
      @gigi19mai1  Před 3 lety

      @@jaliesawashington4551 I have a video with this stereo installation - this is the 2nd part. The side part will be reused from the factory stereo.

  • @essexparkingsensors
    @essexparkingsensors Před rokem

    What you did is not bad is really bad, and the camera is the worst ever