2015 Dodge Charger (5.7L) RT Spintech ProStreet 6000 4"tips
Vložit
- čas přidán 7. 09. 2024
- This video is a complete progression of my exhaust for my car. The first video clip is my stock exhaust. The second clip is when I did a mid muffler delete but left the resonators. And the final video is my current exhaust set up. I now have dual spin tech pro street 6000 mufflers with dual 4 inch tips and also changed to the police rear valance. All of the videos were shot with an iPhone 6 Plus
(made with #spliceapp - get.spliceapp.com)
my next mod on the list ! first one of course had to be the oil catch can
This set-up sounds really nice, I will be doing the same thing to my Charger soon.
CrazyCarDude1320 thank you good luck with your car you will love the Spintech mufflers
That looks so much better than stock!! Thanks for the video! Happy holidays
sounds so aggressive I like might be my first upgrade on mine
That sounds freaking awesome !!!
paul duramaxhd thank you
Where did you say you got the valance from?
I love the sound bro I have a 2016 rt and I was looking for a deeper sound and I think this is it your system is stock just those mufflers and you took off the resonators is offset or center for both mufflers
And does it matter on what material you go with or is there one I should get specifically for the muffler
@@rt3458 I cut the exhaust off at the mid muffler and replaced the mid muffler with two offset mufflers and ram new pipe to the rear where 4” tips were put on.
Material shouldn’t matter much for sound
Sounds awesome bro how much were the rear valance for yours ive been looking and I can't find any cheaper than 200
Kidd if you go to the dealership they are like $75 and have a $100 core charge. So cost $175 up front then take your stock ones back and get your $100 back
I been looking everywhere and can't find it
Juan Barrow it is the valence for the Charger police car I have the part numbers in the comments on one of my other videos I'll share it here. czcams.com/video/GQtEQr-zgaU/video.html
I finally got some time to work on removing the rear valance so I can get the mufflers and tips put on. How did you get the end clips (1 on each side) off? The middle ones were simple but these end ones are proving to be difficult.
Claude M I drilled most of the rivets out since I bought replacements when I bought the valence
The rivets that you drilled out were the ones that were holding those oval exhaust tips?
Claude M I drilled out all the rivets
Ahhh ok.... because I was sitting here looking at this like how in the world did he get these out.
Claude M yeah only way to get rivets off is to drill them out there are three plastic pop clips between the exhaust tips that shouldn't need to be broken
What size exhaust ?
The factory exhaust pipes were used everything was just cut and welded into place
So, no resonators, and the spintech mufflers, but you do not get drone when in MDS?
NeonDaVinciX correct
krisandkristi75 excellent. I currently have a muffler delete but have been looking for something more. I drive mine every day and want to keep it from getting annoying. Those spintechs sound amazing on your car.
NeonDaVinciX thanks man they sounds great they're louder at idle when cruising you don't even hear them but as soon as you give it some gas it comes to life. I think they are the perfect Hemi muffler
krisandkristi75 Perfect. I appreciate your input and getting back to me.
did you install the valence or bring it to a shop just wondering if it was a tough swap is it worth diy or jus bring to a shop. Thanks
Anthony Riley I did the install myself I drilled out the old rivets and bought 2 replacements when I bought the valence. It seriously took about 30-45 min
awesome good to no. was looking for install video just to get an idea but there's nothin. thanks much appreciated
Anthony Riley www.chargerforumz.com/threads/r-t-rear-bumper-lower-trim-swap-to-install-4-inch-exhaust-tips-there-you-go.178157/page-5
Here is a step by step I used
krisandkristi75 awesome thank you
Sounds great man i just order all my parts just like yours, How much did the exhaust shop charge for the labor ?
dbullet22 paid $270 for install
krisandkristi75 what size is the stock exhaust 2.25 or 2.50 ?
dbullet22 2.50
Any problem with mds drone?
Jeffrey Turner absolutely zero problems car is quiet when I want and loud when we go
what is the part number please?
فهد f czcams.com/video/GQtEQr-zgaU/video.html
Where did you get the valance from
aanthony21 I bought it at the dealership it is the rear valance for the police edition dodge charger
krisandkristi75 was it hard to change?
aanthony21 it was not bad at all I found a step by step online and it took me and one other person about 30 min to do
How much....
Sean Cuffie $75 for the valence
Where did you get the tips from??
Carolina Bully Team ebay
Sounds like shit should have got flowmaster outlaws
Acesweatshirt _ well thank you for your kind words
Acesweatshirt _ I don’t like loud and raspy this is nice a deep
Acesweatshirt _ just because you don’t like the sound of one set up doesn’t mean it’s shitty if anything you’re a shorty person for dissing people for their preference.