3D Printed G305 Mod- 58g!
Vložit
- čas přidán 6. 09. 2024
- I 3D printed a gaming mouse!
Step-by-step instructions with circuit diagram:
www.instructab...
Join the Discord: / discord
Teardown:
• Logitech G305 - 4K Tea...
I bought most of it from AliExpress: s.click.aliexp...
My Blog:
- ananords.com/
My Instagram:
- / ananordss
If you have any ideas for new videos, please comment below!
Music:
(00:00 - 03:17)
Chai Me by Schematist | www.schematistm...
Music promoted by www.free-stock...
Creative Commons Attribution 3.0 Unported License
creativecommon...
(03:17 - 5:05)
Joakim Karud - Loudness and Clarity
/ loudness-clarity
the more of these i watch the more i regret not just buying a g305 and a 3d printer
do u have 3d printer?
@@vedantmistry939 no but I want one
EXPLODING DRAGONS go for it if u want emotional support I am with you
@@vedantmistry939 lmaö
Same
Getting a 3d printer solely to customize my g305. Even without the printer I was able to cut it down to 79g by cutting out bottom plastic and triple A plus tin foil. Bottom plastic was around 6 grams of it
what do you mean by the bottom plastic? can you share the pictures of it?
@@soldomisol a bit late but he means the removable shell
I recently made a post on Reddit about how the G305 can handle 4v from a lipo just fine so you can make it even lighter by ditching the extra pcbs and keeping just the TP4056 module
Can you link me the Reddit post
^
.
curios about that too
^
Very informative, thanks a bunch for sharing! Nowadays it's "paying premium for a premium mouse or getting a 3D printer for the difference." For me it's mostly about size, i need bulkier mice for big hands with palm grip - and this vid is a great resource. Thanks for taking us along! Now we only need better recycling options for filaments...
mouse manufacturer : makes it kinda heavy for more stability while using it
some guy with 3d printer : haha plastic goes hole-y
me : *trypophobia Intensifies*
i 100% guarantee logitech did not intentionally increase the weight of the g305 for "stability". in fact the opposite is more common, lighter mice are far more popular and available then ever right now
G305 is kinda back heavy though. So it needs to lose weight on the back
@@vSolarz I believe he means rigidity
@@ManicQuinn i also 100% guarantee that either as some of the most solid and rigid mice are made without needing to add extra weight
@@vSolarz alot of the weight loss comes from removing the parts that makes them rigid in this case, have you seen the mod videos? I'd imagine adding holes reduces rigidity too. This particular mod video also shows the removal of thw battery enclosure and going with a taped rechargeable lithium instead
looks wired how its feeling like ? "cheap pvc" idk
He did not sand it down thats why
Looks so good, you can't even tell its a g305
Me excited and wanting to do this:
Me then realizing I gotta do all that wiring that I don’t understand:
Me: ooOhHh I HAVe tO BE sMaRT tO ACCtUALLy dO STuFf...tHaTs a bUmMEr...
Funny😐
Now I wanna try to make one, just using a drill. Knowing how it looks on the inside, It might even work after! hehe
you should try doing acetone smoothing on the 2d parts, makes them super smooth and slightly stronger too
I printed mine from PLA. Therefore i did not try to use acetone, because it only works on ABS.
This is why I’m glad to have an epic prusa
Nice editing! Subscribed :)
Thanks!
An exceptional job, for me the scroll of the g305 does not please me, I would change it to make it look different. good idea, thanks for the diagrams
I dont have a 3d printer but is it posible to buy from someone?
A 3d printed gpw with the sensor further forward would be a dream!
I've done the exact same shell and mod from AliExpress a few months ago.it's funny I've never found one on CZcams until now, I've been looking for it before I tried it but I couldn't find anything.
Look up micbouc_93 on Ebay. I have 3 G305 all under 70g with AAA and pen spring.
how about printing a g303 bottom half to convert a g305 to wireless g303 🤔
my dream!
If you did finish it with the paint omg it would be amazing.. I want it
Place the charging protection board at the charger source and also cut off excess cable lengths, to reduce more 5-10 grams
Really cool video, don’t really understand the appeal of an ultralight mouse but the watching the nodding process is kinda mesmerising
Cool project, I want to do something similar, I LOVE the small size of the G300S but its internal guts are aged, I want to 3d print the small-sized G300S shell but put the latest 16000 DPI sensor in it etc.
I i used to use g300s but i switched to g304 and i recommend you to do that too
A batterie with 1.5V and 200 mAh should work without a voltage step down module or am i wrong?
That should be fine:)
you can also overdo it lol whether 85 grams or 75 grams or 65 grams they notice from a certain point anyway no longer. and too light is also not good because your Aim can also become spongy thereby. because they have little resistor. so it is not for all equally good to have little weight. Everything Individually!
Everything but the mechanics part of this is 3d built i can tell i just think he used a lighter to smooth it and a saughterer to saughter the wires and circuits i think i said that right and the bottom a different material or same idk i just know its not all 3d made its just the casing is if you want a custom 3d casing make one its not hard to just make it even if you do make one
Hello, what filament did you use? Does using a filament like polypropylene reduces the weight more?
Supriseing better than I thought it would turn out great job!
this was cool but i think your projects has so much more potential, the idea of having a usb rechargeable was cool but the plastic of the shell needs some improvement
Something like I am working on. You should have used a smaller mouse. No need of putting the charging circuit inside the mouse
True, but I wanted to charge it with a standard micro usb cable
What filament would you recommend for this?
PETG, easy to print and more durable than PLA
I think the best thing from this mod for me is lower weight of mouse and also micro usb charging. For now for my g305 wireless i made only 3d printed lighter battery cover, but I think in future I will add micro usb port for charging.
can you share lighter battery cover 3d print file ? :) Thanks!
Like this one? www.thingiverse.com/thing:3546037
@@Ananords I used exactly this one. :)
Super, mate! Spot on! Subbed xoxo
looks good
Needs a bit more polishing, maybe sand it a bit more. Awesome tho
But it's fine for me because it is gonna be grippy so it's fine
Hi i have a question. So for the step down, we need to set the step down board until the Voltage is around 1.5V?
And Did you make some tweaks/Edit on the 3d model before printing? like adding the usb port hole for the top and base on the bottom?
Edited: Oh, I saw you made the board adjustment @3:01 .
amazing work bro i have a 305 and i love it
Do you have to do soldering work for this to work?
is it possible to get better quality that this
All of the soldering necessary?
Nice mod :)
no lo voy a hacer porque ya tengo un glorius o- pero te dejo mi like por lo mucho que te esmeraste, saludos desde argentina
Can’t you change printer settings so it looks better?
I really need a mod im from france, im gonna search if i can find someone to make me the same as you!
Now is a finalmouse!
I'm subbing
my 2 week year old child could break that shit in half
PLA is actually a lot stronger then it looks it all depends on the infill people seem to use very little infill % when it comes to making lightweight mice. also i wouldn't really recommend making a full mice out of 3d print they look scuffed for both my g305 i only printed battery pack and bottom and it feels just as strong as the originals. at 65 grams
It's not that strong, I know, but it's strong enough. Also, the clear lacquer I sprayed it with in the end made it quite resistant to scratches, and it gave it a nice feel.
@@Ananords you might want to experiment with a lower density plastic like abs and use acetone smoothing if you want to cut down the weight even more
then don't give it your 2 year old child
@@minion9707 i usually put like 20-50 infill on my prints
I loved it.
What mouse feet are you using?
I am reusing the stock one that was on the original mouse:)
I really want to order the air58 print from piranha. Do you think these mice can last or is the durability not there yet?
Also is there a way to treat the pcb so dirt and sweat that gets in the holes doesn't damage it. Or is that not too much of a concern?
I'll write it this way if you buy it from the Chinese you've got it cheaper and it's nicer than what I've seen
Is it possible to retrofit the g305 3d print shell design to be put on the g102/g203?
You could modify it to fit, or you could search for models that are made for the g102/g203.
That looks like it would break if the wind blew past
U can always just print a new one
do i need to get extra wires?
The shell file on Thingserve is not the same as yours cause it hase no holes in it = more weight... Is it possible that you can send me the file with the holes?
I know. You have to buy the file with holes on etsy.. I am not the original designer, so I can't send it to you unfortunately.
Recently made myself the same mouse, albeit lighter, at 50g. Honestly, it's better than a Viper Ultimate, which I owned previously. 3D Printed haul ass!
does the charging system work? i cant really understand how the circuit system can charge the battery
Did you reused the stock feet?
Yes, I used some glue to glue them back on
Ananords Nice. The mouse looks great. I wanna do the same thing. When you bought the files was the shell for the AAA included also?
@@_el_cucuy_ No, but I sent him a message and he sent me the new files. So if you have any questions just ask him, he is great.
Ananords Right on. Appreciate the responses and video. Will definitely be looking into this mod.
can you use it though? it looks like id break if you grip it too tight
I use it every time I play games, hasn't been a problem.
can i use type c port instead, will it work?
Yes
Just a question do i need to completely change the click or i can just keep it as a whole?
Do you mean de-solder the button from the PCB?
this look close to glorius model o and d
That’s crazy that Not even the same mouse anymore
Fantastic mod man! Can u please provide the stl files?
Thanks! See the links in the description:)
Great mod and video! but I have a question... I really want to print a 3d shell for my g305 but do the 3d printed buttons make the main clicks and side buttons feel worst? Thanks!
Hi! Thanks! The side buttons are a little bit harder to press, but other than that, it feels great:)
@@Ananords that's good for me. I keep accidentally pressing them. Also I would use acetone or epoxy to smooth out the plastic if its abs. edit can you send me a link to the 3d files.
@@sublimelime6354 Honestly I wouldn't smooth it. The 3d print layers give really nice grip, especially on the mouse buttons. Just make sure to get a good print and it will look and feel awesome.
do g305 mods work with the g203?
How is this shape?
I'm having a g102 and wondering if I can do the same thing to my mouse too ?
You can but you need to cutt a hole for the wire
How did you get the shape?
Could yoy tell me what are the dimensions of the mouse?
nice mod you can make this lighter with a 1.3v button battery
You can! I would rather have a large rechargable battery though, but you can make it even lighter with a button cell battery.
y micro usb tho
okay it has a better shape as well.
i will make it
wOW!
easier to add 50 bucks and buy something like pulsar x2 mini and get 52g with factory level quality. this is totally not applicable for people who doesn't own 3d printer, cause ordering these + g305 cost will end you the same amount of money.
it's all fun and games till the mouse lipo explodes
Which 3D printer did you use?
I built it myself:) Based on a hypercube.
@@Ananords Is it really 58 grams with the battery and everything? What did you use to measure that? Have you learned any new and cheaper ways to create the same low weight mouse from a G305? Sorry about the many questions, but I just want to do this myself somehow without having to spend more than like 20€ or with the few basic tools that I already have :D
I used a digital scale to weigh it when it was finished:) I don't see how it would be possible without a 3d printer, or by ordering the printed parts. You can drill holes in it, but that wouldn't look good. If it is just the weight savings you are after, try using a rechargable AAA battery instead.
Files?
wow this is so nice i'm going to try attempt doing this mod. is it the reason why you didnt u didnt use type c was because most of the module were too big
@@Ananords type c port instead of micro usb
No, I just used micro usb because I had it from another project.
Can u do it with G402??
cool!, but why did you print it diagonally?
It's the optimal way to get the best quality:)
@@Ananords oh lol , Why?
Bro please tell me how many hours on the new battery
About a month
@@Ananords how many hours total
@@Ananords what battery should I use li-ion or lipo, and how much capacity of battery is enough
@@Ananords is 800 mah too large
@@vrashabhsontakke7282 No idea, around 250 hours?
How you change battery?
You don't, you recharge it with the micro USB port in front
Oh thought it has a changable AA battery or did you mod it?
@@jacobmoody2007 bruh did you even watch the video?
The edges of the model aren't sharp. There are particles left as the 3D printer didn't manage to print the model %100 soft and this makes the mouse look like a product from a lousy brand.
if you sand the case. it will be perfect :D
if you had sanded it it might not look like a dog chewed it up
Туда бы кулер на низких оборотах
si la pintura hubiera quedado mejor hubiera sido epico pero la impresion 3d no sera como la caarcasa original
Model On't
Nice! Weight?
58 grams :)
@@Ananords what the actual frick
can the shell be adapted to a logitech g203?
No there’s no hole for the wire
there's probably something similar for that mouse
shit looks like i could break it by flicking it
I get it that it is slightly lighter but the look and finish of it is horrible. Makes it looks like an unfinished product.
Well, I really like the looks! If it's not for you, it's fine.
@@Ananords Design is fine, just the finishing looks really bad
I can somewhat agree with that. It looks alot better in person though.
lmao people even paying for this shit, would burn it even if i get it for free
thats not the g305 shape whatsoever
It has the g305 pcb inside it, meaning the internals are from a g305
@@nathans2157 i said its not the same shape at all i wasnt taking about the internals
@@ekeromano6399 the shape is a final mouse UL2. Are you looking for a 3d printed G305 shape weight reduction mod?
@@nathans2157 i know a goober that speedruns excel isnt talking
@@ekeromano6399 im just confused about exactly what you want lol
Oh my god poor mouse, you fucking ruined it
Well, if that's what you think, then ok. I really like it though
At least dont paint on the grass maaaan
The hell did he do that for? Not even a slice of cardboard lying around?
crap...
looks terrible.. :)
Everyone have different tastes, personally I really like it:)
@@Ananords i appreciate the amount of time you put into this mouse..
And the weight you got cut off are insane.
My 305 is 62g without the battery, but 80g with an aaa adapted battery.
I would love the 62g you have with the battery..
mucho mod pero quedo para el orto, hay que decirlo
can you provide a link to download this 3d model?
See the step-by-step instructions in the description:)