2020 Ford Mustang Shelby GT500: Full Car Xpel Install (Obsessed Garage Series)
Vložit
- čas přidán 27. 08. 2024
- In this video, we are continuing the 2020 Ford GT500 New Car Protection series with Matt from Obsessed Garage. To watch this series from the start, I recommend you head over to the Obsessed Garage CZcams channel (link provided below). On Matt's channel, we focused on the prepping, decontamination, ceramic wheel coatings and paint correction that we helped with at OG Headquarters. This video will follow up on that, showing the process of applying XPEL Ultimate paint protection film to the entire car. Our next video will show the application of Gtechniq ceramic coatings to all of the exterior and interior surfaces of this GT500, so make sure to subscribe!
Catch the beginning of this series on the Obsessed Garage channel: • 2020 Shelby GT500 Gets...
PLEASE LIKE, SUBSCRIBE, COMMENT, AND SHARE IF YOU ENJOYED WATCHING!
For a full list of our detail product recommendations, tools and studio equipment, click here: bit.ly/3eKJPC6
Keep up with our daily "short" stories and activities on instagram: / presidentialautodetail
Follow us on facebook: / presidentialautomotive...
View our website for more information:
presidentialde...
or email us at:
sales@presidentialdetailing.net
I think this is the best looking color on GT500
damn that xpel application is pure art, amazing job !!!
Thank you!
Your work is amazing! Great stuff! I got my 2020 GT500 9 months ago. Just started a page myself. I admire the work you guys do. Keep it up👍
Thank you! We will check out your page!
@@PresidentialDetailing thanks!
Hey sweet video mate! I love watching these PPF installs, so much attention to detail!
Thank you!
Nice
Great job as always guys. Man i love that car
Fantastic Shop!!!!
Awsome work!
dude is fast
Funny how no one will tell you the price. I bet somewhere around 10k for everything.
got my 22 GT 500 PPF with Expel like 2-3 weeks ago. But mine has many issues, theres lots of white looking stuff on alot of the edges of the hood, and fenders, and bubles that they said would go away over time, but has not, also i see lots of little bumps like rubbish under the PPF. Also lots of edges the PPF did not stick, it sticking out. very un happy. i will drop it off to them, they said they can fix it? I not sure if they can make it better without redoing the whole job again! you think that kind of issues can be ironed out without redoing the job all over? I also see lines in the film, like when it bends or sticks and they take it off and reapply....terrible job.
What is this? A wrap for paint protection? Does the car always look clean and Shiney with this? I just had my mustang painted it’s a laser red tri coat candy paint code and I was gonna ceramic coat my car but this looks way better
The paint protection film serves a different purpose than a ceramic coating. The PPF is designed to protect the vehicles paint from rock chips, road debris, bug etched, etc. While ceramic coatings are more for long term durability and ease of maintenance, hydrophobics. We often do both on most of the cars we work on, with the front end being protected with the ppf and the entire car polished and ceramic coated.
Looks good. What do you typically charge for full ppf and ceramic coat? I’m getting a new GT500 delivered soon
Shoot us an email. Congrats on the car!
Do you do the paint correction prior to putting on the PPF? If so what does it consist of? Lastly would you put on a ceramic coat over the PPF?
Yes, in most cases paint correction is done prior to the PPF being installed. Paint correction processes vary based on each car and its paint type (soft or hard clear, color, etc). The ceramic is applied over the top of the PPF. Thanks for watching!
Aaa
Hey Billy, I just installed HALO on my PPF for my personal vehicle. I’ve used this product before and have had no issues. I noticed some streaking on the hood when the sun had set. I could not see the streaks with my scangrip lights using the diffuser caps or with just general bright lighting. The coating only had about 3 hours of cure time. I’ve tried applying more halo directly in small sections to reactivate the solvent but it hasn’t helped. I also tried polishing with a yellow rupes and a mild polish(menzerna SF3500). I tried a compound with a yellow rupes as well. Both faster arm movement and low speed since I didn’t want to risk burning the film. Hoping you can help me somehow with this. The rest of the car currently has CSL applied and I had no high spots anywhere else as I’ve been applying coatings for a few years. It was applied in a garage with the outside temperature being 22C with a humidity of 54%. As per instructions I did half a hood at a time and wiped it off immediately with the three towel method.
It is extremely hard to tell in most lighting situations so I’m contemplating to leave it but since it’s been less than a day of cure time I’m hoping i can fix it somehow.
Which brand PPF film did you apply on? A quick polish almost always fixes any issues for us. Maybe your being a little too gentle with it?
Presidential Automotive Detailing its XPEL ultimate plus that was installed a month ago. Any way I can email you? It is so bizarre to me as the actual light reflecting off the surface is completely clear. There is no haze or blurry ness you’d typically see.
@@eliteowner121 yeah, feel free to shoot me an email through my website contact form. www.presidentialdetailing.net
How do you get around the cobra emblem on the rear deck lid?
What slip solution did he use when installing ppf?
They use a mixture of baby soap and water.
11:37 what is that tune?
I will have to look up the name when i get back to the shop.
How many days does a job like this take
Typically a full week.
I wonder how much this was…
No no no..Big No to tearing my car apart Nope!!