gerade im Forum über das Thema Ballast gelesen. einfach die Ausfräsung Unter der Tragfläche erweitern, nach vorne und hinten mit Schaumstoff verschließen. so erhälst du eine 70mm lange ballastkammer die ziemlich exakt im Schwerpunkt liegt. ich Kann bis zu 280 Gramm Blei reinpacken! Gruß!
curious...did you cutout the elevator to make room for the vertical stab? I am looking at doing this with the Ultra EC 2m... In my case, the instructions were lacking.
Good job. Does the plan still fly? I just finished my Solaris. I started it a long time ago. It wasn't too difficult, I was just slow. I was also nervous about screwing up. Just a hint on the bleeding of the black paint, I masked then used a clear coat (or same colour as the under coat as the case may be), then I used the over coat colour. The clear coat bleeds which can't be seen. It then stops the over coat from getting under the masking tape to leave a sharp line.
That is a beautiful video production Laessig. Some excellent photography and some clever use of focus and tight angles - LOVED IT
🐞🐞 lady bird .walks over work .just checking everything is ok . Keith Australia
gerade im Forum über das Thema Ballast gelesen.
einfach die Ausfräsung Unter der Tragfläche erweitern, nach vorne und hinten mit Schaumstoff verschließen.
so erhälst du eine 70mm lange ballastkammer die ziemlich exakt im Schwerpunkt liegt.
ich Kann bis zu 280 Gramm Blei reinpacken!
Gruß!
curious...did you cutout the elevator to make room for the vertical stab? I am looking at doing this with the Ultra EC 2m... In my case, the instructions were lacking.
Good job. Does the plan still fly? I just finished my Solaris. I started it a long time ago. It wasn't too difficult, I was just slow. I was also nervous about screwing up.
Just a hint on the bleeding of the black paint, I masked then used a clear coat (or same colour as the under coat as the case may be), then I used the over coat colour. The clear coat bleeds which can't be seen. It then stops the over coat from getting under the masking tape to leave a sharp line.
Please tell about the fuselage is it vaccum formed what's the material Abs or polistirene?
was the spray paint acrylic and what brand