Video není dostupné.
Omlouváme se.
GE Dishwasher Not Starting? SHOCKING Causes That Will SURPRISE You!
Vložit
- čas přidán 17. 08. 2024
- 🔗 Detailed Guide: simplyswider.c...
👥 Join our Facebook Repair Group for more tips and support: / simplyswider
Is your GE Dishwasher not starting up? In this comprehensive video, we dive into the common issues that prevent your dishwasher from starting and guide you through the steps to fix them. From control lock activation to power supply issues, we cover a range of problems that you might be facing with your GE dishwasher. By the end of this video, you'll be equipped with the knowledge to get your dishwasher up and running again.
🕒 Timestamps:
00:00 - Intro
00:37 - Why?
01:42 - Issue 1: The Control-Lock Is Activated
03:46 - Issue 2: Faulty Power-Supply
05:44 - Issue 3: The Dishwasher Is Stuck
08:00 - Issue 4: Wrong Dishwasher Settings
10:23 - Issue 5: Door Not Locked or the Latch is Broken
13:12 - Issue 6: Starting the Dishwasher When the Door is Locked
14:19 - Issue 7: A Problem with the Control Board
16:41 - Outro
Don't forget to like, comment, and subscribe for more helpful appliance repair guides. If you encounter any other issues with your dishwasher or have tips to share, join the conversation in our Facebook group.
#GEDishwasher #ApplianceRepair #HomeMaintenance #SimplySwider #DIYRepair #KitchenAppliances #TroubleshootingTips
Great video!!! I too simply reset the circuit at the power box and life was good again. 🎉😊
Thank you so much for sharing. I followed what you have said and my dishwasher is finally working. Thanks a lot for the tip. May God blessed you. I am going to write it down so I wouldn’t for get.
Thank you . I reset the circuit and it works🎉❤
Great video... thanks
Thank you for your video appreciate your humor 😊 came across you as we were experiencing water in our GE dishwasher husband changed the drainage pump it worked and now it won’t turn on after wanting to be stagnant. Will try what you suggested and see if anything helps. It’s like the washer wasn’t completing the cycles and it stopped signaling when it was done. After he replaced again it worked but there was water in the bottom. It’s a shame that we just started using the washer in 2023 and we had our home built in 2016. Why didn’t we use it? We thought it would waste water but our oldest daughter showed that it actually saves water and so did the water bill 😂yes we were slow in our thinking. All the best to you for sharing your knowledge and expertise 😊
You saved my life. Thank you sir.
You literally saved my life but now I feel like an idiot it was the lock control 😂
It was the control lock, thank you..
Thank you so very much!!!🎉
Well, apparently not all the issues are covered here... in our case I figured out that the door's right side has to go a little up for the door to get intp.the latch, and the latch start working.... and I can't figure out how to fix it... FYI, everything else is leveled...
Thank you so much!!!!!
My ge dishwasher is beeping and blinking constantly and won't start I've just changed the contol board because that is what the tech told me that was wrong it
Isn’t fuse one of the first thing to tackle first ?
usually best replace both boards
By the shore
nope the control will not unlock and disconnecting power to the dishwasher overnight won't reset it either
My lock control won’t go off either. I’ve tried holding button, unplugging, turn of circuit breaker, hard reset and nothing. Any other ideas?
Nobody wants to hear stories about your customers and "Jerry", just get to the problem and the fix.