MasterBox NR200P MAX Intel Core i9 13900K RTX 3090 Build

Sdílet
Vložit
  • čas přidán 13. 06. 2023
  • ▶ Don't Forget to Enter the Giveaway! Win a MasterBox NR200 in Black.
    Filming and editing this was an incredibly enjoyable experience. To provide some background, I typically upgrade my PC every 7-8 years, and when I do, I tend to opt for higher-end components that remain competitive with newer chips for a longer time. My last PC upgrade was in 2016, during which I was using a Quad Core i7-4770k / GTX 770 setup. It was an excellent system that served me well and played a crucial role in getting me to where I am today. However, it was beginning to struggle, signalling the need for an upgrade.
    The PC market has made significant progress since my last upgrade, especially in the realm of compact builds. When I first laid eyes on the MasterBox NR200P MAX mini ITX case, I knew it was the perfect choice for me. Previously, my PC resided in a monstrous Fractal Design R4 case. I had been contemplating downsizing my system for a while, and this was the opportune moment to do so.
    The NR200P MAX currently comes only in grey, but I had my heart set on a white system. Consequently, I ended up purchasing two cases: the standard NR200 in White and the NR200P MAX in grey. Thanks to an incredible design by @coolermasteronline, the panels are all interchangeable, allowing me to create a truly unique-looking NR200P MAX in White. It showcases a captivating blend of monochrome colors derived from the two different cases. I repurposed the second case to house my old system, which now operates flawlessly in my workshop for CAD and CNC tasks.
    In addition, I had always harbored a desire to document the entire process, but back then, I lacked confidence in front of the camera or recording anything. However, this time, I made a firm decision to create an entertaining video that I can revisit in another 5-10 years, when this system becomes obsolete. It would be a nostalgic memento to cherish, capturing the excitement and joy of building and upgrading my PC. I now use this new system for video editing, gaming and training deep neural networks. The performance is incredible and the cooling is outstanding for such as small case.
    ----------------------------------------------------------------------------------------
    As an Amazon Associate I earn from qualifying purchases.
    If you purchase via my links, I receive a small commission, at no extra cost to you.
    ▶Full System Spec:
    ▶CoolerMaster MasterBox NR200P MAX
    UK: amzn.to/3Jdj8aq
    US: amzn.to/43EqvQ2
    ▶Asrock Z690M-ITX
    UK: amzn.to/42Jz5vE
    US: amzn.to/3JcUqH2
    ▶Intel Core i9 13900k
    UK: amzn.to/43ZtgLH
    US: amzn.to/3X91dXO
    ▶Nvidia GeForce RTX 3090
    UK: amzn.to/45XNast
    US: amzn.to/3Nro0v0
    ▶Corsair 64GB DDR4 3200MHz Memory
    UK: amzn.to/45VtSUm
    US: amzn.to/43XZc37
    ▶WD Black SN850X NVMe SSD
    UK: amzn.to/3PcujDL
    US: amzn.to/43BpjNq
    ▶Corsair AF120 SLIM 120mm Fans
    UK: amzn.to/43EvFM8
    US: amzn.to/3oWTTCj
    ----------------------------------------------------------------------------------------
    ▶50k SUBSCRIBER GIVEAWAY:
    Win this: amzn.to/3JaLt0I
    HOW TO ENTER:
    1) Like, Subscribe & Share.
    2) Tell me why you want to win the case.
    3) Answer the following question:
    How many times did I use the screwdriver in the video?
    (this includes use on the same bolt multiple times).
    Comment your answers down below.
    Thanks for the support.
    Winner Announced: 10th July 2023 7:00PM BST
    ----------------------------------------------------------------------------------------
    NO MUSIC COPYRIGHT INFRINGEMENT INTENDED, ALL CREDIT GOES TO ORIGINAL CREATOR.
    Song: Rob Dougan - Clubbed to Death
    Purchase: music.apple.com/us/album/club...
    ----------------------------------------------------------------------------------------
  • Věda a technologie

Komentáře • 60

  • @elbutchos
    @elbutchos Před 7 měsíci +9

    Came here for the title , stayed for the soundtrack :))))

  • @Edemce1
    @Edemce1 Před 6 měsíci +1

    I just got done with mine , LOVE IT. I did notice i had to be careful with the wiring behind it.

  • @francisgravel6593
    @francisgravel6593 Před rokem +4

    This inspires me. I'm in the building process of a similar PC. Nearly the same motherboard. I like the way you can open this case from every side as the motherboard I chose have m.2 slots under it. This is why I would like it. You've used the screwdriver 36 times.

  • @RyanStone143
    @RyanStone143 Před rokem +1

    Great build, and I love that tune!

  • @thehardwareguy
    @thehardwareguy  Před rokem +14

    For those interested, all components for this build have been provided in the video description. A lot of people have also been asking about temperatures, so heres my experience so far:
    The 13900k runs hot in any system, damn thing is running at nearly 6GHz which is crazy. I also have the 3090 in there which gets to around 70-80C while gaming.
    With Turbo Boost (5.8GHz), temps peak at 95-100C with the Multicore Cinebench Test. (Yes, it throttles between 3.2GHz and 5.6GHz)
    With Turbo Boost (5.8GHz), temps peak at 60-70C while gaming.
    With Turbo Boost (5.8GHz), temps peak at 35-40C with casual PC use.
    With Turbo Boost Off (3.2GHz): Never peaks above 60C in any scenario.
    I am yet to experiment with undervolting, but I am well aware that this has great benefits on these 13th Gen chips, even improving performance with lower temperatures. If I experiment with this, I will make a dedicated video about it.

    • @wranefis
      @wranefis Před 9 měsíci

      don’t know much about pcs i know sad . but just wondering are these temp deal breakers ? for someone trying build a pc just like yours

    • @PatrykPietrzak-vp9uy
      @PatrykPietrzak-vp9uy Před 8 měsíci

      How much did u achieve in Multicore Cinebench Test?

  • @mojito6629
    @mojito6629 Před 8 měsíci

    What you wrote in the description is almost similar in what's in my head now about my system LOL

  • @nitrocranium
    @nitrocranium Před 11 měsíci

    Awesome build, after this video I’ve pretty much made up my mind on which case to use. One question: bottom fans are intake or exhaust? Thanks!

    • @thehardwareguy
      @thehardwareguy  Před 11 měsíci +3

      thank you! I've set mine up as intake to help cool the GPU. In turn, this also helps cool the air that is drawn through the radiator and exhausted out at the top of the case.

  • @teachhimself
    @teachhimself Před 3 měsíci

    I would use vented panel but hot damn is that a good looking build

  • @captainlcm
    @captainlcm Před 11 měsíci +1

    arrrr Haven't heard this matrix theme for a while

  • @Zambrana3D
    @Zambrana3D Před 4 měsíci

    Beautiful

  • @toma.cnc1
    @toma.cnc1 Před rokem +1

    Thank you, i already have the NR200P in black.

    • @thehardwareguy
      @thehardwareguy  Před rokem +1

      It's a great case isn't it! Real fun to build in

    • @toma.cnc1
      @toma.cnc1 Před rokem

      @@thehardwareguy yes it is, have the Ryzen 7 3700x water cooled, had the biggest Radeon RX6800XT OC in it but had to sell it last month. Now RX580 8GB

    • @anonymeralkoholiker2880
      @anonymeralkoholiker2880 Před 11 měsíci +1

      Why did u sell it and how where ur temps? Im Planning on a similar setup With a 6800xt.

    • @toma.cnc1
      @toma.cnc1 Před 11 měsíci +1

      @@anonymeralkoholiker2880 I never used it for games, it was mining for nearly 1 year, while mining the temps were 52-56 without the lid mounted vertically. It was very quiet compared to smaller reference design RX6900XT i had.

  • @ToxicSapiens
    @ToxicSapiens Před 5 měsíci

    Is this undervolted to deal with heat ? Is the NR200P cooler enough ?

  • @GreenEggsAndGraham
    @GreenEggsAndGraham Před rokem +1

    How are your temps? Load and idle? Im contemplating a case swap and this could aid in my decision.

    • @thehardwareguy
      @thehardwareguy  Před 11 měsíci +1

      I've put some temps in the pinned comment 👍🏻

  • @jonnyfontane3607
    @jonnyfontane3607 Před měsícem

    for the people asking for the temps, do your BIOs and youre fine, even with an i9 in this case

  • @Getingen98
    @Getingen98 Před 11 měsíci

    I want to win the case because I’m upgrading my graphics card and the new one don’t fit in my LOUQE Ghost S1 MK3. You used the screwdriver 15 times 😆 great video!

  • @EliasLobo369
    @EliasLobo369 Před 8 měsíci

    What are the temps?

  • @Walkdthock
    @Walkdthock Před 10 měsíci

    I’m trying to build a 4090fe on this nr200p white. I cant afford to buy both max and white to swap them like you did. Is there a way to buy the aio from max ver separately? Or is there an aio that i can use on the non max version of nr200p? Thank you.

  • @heeku_
    @heeku_ Před 9 měsíci

    would u recommend swapping the aio to a corsair h115i rgb elite? im going to use themaltakr toughfan pro 14 on either aio.
    using a 12900k
    thanks a bunch!

    • @rtorbs
      @rtorbs Před 8 měsíci

      Its defo a better cooler but id say try a contact frame, undervolting and change of airflow direction first

    • @heeku_
      @heeku_ Před 8 měsíci

      @@rtorbs legit don't wanna undervolt cuz i dont need to do so in my nr200p with the corsair aio, cpu isn't passing 65c..

    • @rtorbs
      @rtorbs Před 8 měsíci

      Sound I replied based on your OP where you didnt have the AIO@@heeku_

  • @terrytjandra
    @terrytjandra Před 3 měsíci

    what is your temp?

  • @killrockstartv
    @killrockstartv Před 10 měsíci

    how are gpu temps in this?

  • @orphanorbe
    @orphanorbe Před měsícem

    Can you fit a 4090???

  • @sburnes5509
    @sburnes5509 Před 11 měsíci

    Is it possible to squeeze in a full sized mb into one of these cases? Also 20 times i think

    • @thehardwareguy
      @thehardwareguy  Před 11 měsíci +2

      definitely wouldn't fit a full sized board in there. Even the Mini-ITX is very snug, particularly on the right hand side near the power supply

  • @vincentpatrick886
    @vincentpatrick886 Před 10 měsíci +2

    Is the 280mm aio enough to cool a 13900k?

    • @djktana
      @djktana Před 10 měsíci

      I exactly have the same question

    • @rtorbs
      @rtorbs Před 8 měsíci

      Depends what you're after.....no one builds a SFF build with top tier high heat output components and expects it to be cool....the tradeoff is, you dont have a behemoth case at the expense of it running hotter than a mid tower atx with a 380/420 AIO. Undervolting absolutely helps, as does a a contact frame and then i found that contrary to standard airflow set ups, exhaust through bottom of rig not through top, pulling external air into rig through the rad keeping the cpu as cool as possible.....if you exhaust top, youre stifling the rad with the internal hot air which in turn raises the cpu temp

    • @thehardwareguy
      @thehardwareguy  Před 8 měsíci

      That's an interesting idea, potentially worth a go. I'll test my temps with both configurations👍🏻

    • @curiouspers
      @curiouspers Před 4 měsíci

      ​@@thehardwareguyhave you tested it? What's the result? Awesome video btw, cheers

  • @mojito6629
    @mojito6629 Před 8 měsíci

    @thehardwareguy
    2 questions;
    -Instead of buying 2, why don't you just buy a white NR200 and the AIO and PSU?
    -Instead of DDR4, why don't you use DDR5 RAM & Motherboard?

    • @thehardwareguy
      @thehardwareguy  Před 8 měsíci +1

      The NR200 is slightly different internally to the NR200P. The full size radiator wouldn't fit at the top, it would have to go at the bottom.
      I chose to stick with DDR4 because I already had DDR4 RAM and this motherboard was cheaper. The board I have supports Gen5 PCIE and the i9 is compatible with DDR4 and DDR5, so when the time comes I will upgrade the board and RAM at a lower cost. Personally I see no real world performance gain in DDR5, and it wasn't worth an extra £500 (board included)

    • @mojito6629
      @mojito6629 Před 8 měsíci

      @@thehardwareguy did you deleted my comment? (about the advantage of DDR-5 vs DDR-4 for Music Production). I hope not. 1st that's a useful information, regardless your Beautiful PC build no matter you use DDR-4. Secondly, I'm just considering to subscribe to your channel and promoting it to my friends, but TBH I'm tired of unnnecessary censorship attitude, usually by more powerful side of something. Good day

    • @thehardwareguy
      @thehardwareguy  Před 8 měsíci +1

      Hi, I didn't delete any comment. It's possible that CZcams somehow filtered the comment if it contained a URL or any bad language etc

    • @mojito6629
      @mojito6629 Před 8 měsíci

      no bad language, I can assure you LOL. Maybe because I put a link to a website (which of a test result which shows that DDR5 has advantages (in music production work, at least) than DDR4). Ok, all good, good day@@thehardwareguy

  • @Norain1992
    @Norain1992 Před 11 dny +1

    Hey there!
    Would you still recommend this PC build today?
    Greetings

    • @thehardwareguy
      @thehardwareguy  Před 11 dny +1

      Absolutely! it's an incredible machine

    • @Norain1992
      @Norain1992 Před 11 dny

      @@thehardwareguy hehe good to know. :D
      Same CPU and same Mainboard? Why no Z790. Are you able to get the full potential out of the i9 13900k?

    • @thehardwareguy
      @thehardwareguy  Před 11 dny +1

      I will upgrade to a DDR5 board at some point which might get even more out of the 13900k. If you can afford it do that! Even with DDR4 though board it makes easy work of absolutely anything I throw at it

    • @Norain1992
      @Norain1992 Před 9 dny

      @@thehardwareguy okay you got me, going for the same build ;-P What values have you set the PLA1 and PLA2 in BIOS? I see that Asrock has just released new BIOS Versions (but Beta)

    • @Norain1992
      @Norain1992 Před 7 dny

      @@thehardwareguy Great to hear that! 🙂but no need for you to upgrade in the near future? I see there is not a huge improvement of DDR5 over DDR4 yet.
      But in case, which DDR5 Mainboard would you get today? And what RAM speed?

  • @Fjerid
    @Fjerid Před 11 měsíci

    Oh the case has build in LED strips??

    • @thehardwareguy
      @thehardwareguy  Před 11 měsíci +1

      It doesn't come with those, I added them in off camera

    • @Fjerid
      @Fjerid Před 11 měsíci

      @@thehardwareguy Thanks for the clarity! I'm about to buy one.

  • @makewithmegma
    @makewithmegma Před rokem

    💕👌👍

  • @98integraGSR
    @98integraGSR Před rokem +1

    Man, talk about sub-optimal flow management

    • @thehardwareguy
      @thehardwareguy  Před rokem +3

      Temperatures have been very good so far! How do you think I could improve on that?

    • @reverend_wintondupree
      @reverend_wintondupree Před 11 měsíci

      @@thehardwareguy How's the CPU Temps been so far? I've been contemplating getting the 12900 but fearing the form factor may cause throttling.

  • @jackryan8719
    @jackryan8719 Před 5 měsíci

    Copyright music violation