I just installed this in my 2018 Silverado 3500, music sounds good but ive lost bass? No add on bass just oem stock, i do have the bose system and i do have the adapter installed.
I don’t know if you’re going to see this but I bought a apple carplay system, every time I change a song or volume hit 0 there’s a popping sound really annoying
Hey I try to install after market audio system but I can’t get any sound out put…what shall I do I have Honda civic 2013 couple with premium factory sound system(I have factory amplifier
@@shantanureddy8115 so I don’t know what you mean by aftermarket audio system. If you are installing an aftermarket radio you need to get the correct adapter to retain the factory amplifier. If you are adding aftermarket amplifiers you need to locate the factory amplifier and use some sort of Hi-Level adapters to get the factory amp signal to feed into you aftermarket amplifiers.
John, I just installed gen 5 in my 2015 GMC with Bose system. This remedy doesn’t seem to work for me as my application does not have audio settings in the vehicle settings. What do you suggest?
I have a Gen IV, and I notice the app settings are different like the one you show the icon to the left vertically the first icon is the satellite and the other one is basic, is there a firmware update?
@@Akafoo247 radio wise yes. But updates and menus are very different. I have a video on how to update the APP. If you run the 4.6 update from our website you should get the new UI.
I dont have the crackling. But on my 2015 ram 2500 with the linkswell xl gen6 volume all the way up at 40 i can barely hear the music. Running wireless android auto. How to i get the volume louder??? Factory alpine premium 8.4 was way louder.
@LinksWellInc factory amp is off. I've gone thru all your videos. And every setting I can find. Max volume on this radio is 40 and with it all the way up and my doors open in the quiet country I can barely hear the music. 😢 so driving down the road sucks barely hearing it and the forbid I roll down a window it's a fail
@@LinksWellIncok wierd thing just happened. I turned my radio down to 26 and Major clear volume...I'm so confused going back up to 40 volume decreases.
Strongly considering your radio for my ‘18 Wrangler JL. I’m planning on bypassing the OEM Alpine amp using PAC interface to incorporate aftermarket amps. This includes a T-harness for the big box plug. Compatible?
It is. But our radio has Preamp outputs and a TOSLYNK output. So the PAC interface really is used to make preamps from the factory radio hi level outputs. I really don’t know that it’s necessary for anything outside of a simple way around rewriting past the OEM Amp. But if that what you want to do. Our radio will function basically the same as the factory radio would with that interference
@@LinksWellInc very good to know, much appreciated! I downloaded the install and owners manuals, is there also a remote turn on lead? Wasn't able to tell if it was in any of the harnesses. Thanks again!
So by flatting the EQ on GMC bose, is that turning it all the way down on factory settings or in the middle on treble, fade and balance? I left mine in the middle and it pops even when there is no sound playing....
@LinksWellInc there is sound, and it sounds okay. What I meant was on boot up for example, or when I'm on a phone call with the volume at its lowest, the popping is constantly there. You don't hear as much when playing music, especially the more I've messed with the settings to try and make it sound better.
You can purchase now through any one of our authorized dealers. We do not sell direct to the retail public. It will not be sold on Amazon only through authorized dealers. Amazon doesn’t offer support to their customers. If you want to purchase online it would have to be through one of our dealers that sell on their own website like; www.adcmobile.com or www.fnaautomotive.com
Hello, I recently installed an android radio for a 2013 mustang which has a pioneer amplifier connected with high level inputs and it turns on with the signal from the speakers but since I installed the Android the amplifier does not turn off when I turn off the car, do you have any idea of What could cause that? I am thinking that the radio continues to send a signal even when it is turned off
So we don’t make a system for the 13 Mustang. So I can’t say for sure what is happening because we didn’t build it to know how it is effectively doing amp turn on. It could be the radios CanBus is set wrong. It could be the harness is built wrong. It could be something internal on the radio is messed up and not switching its signal.
2018 f150 no amp. Speakers distorting bad at volume 25 or higher. Dealer that installed told me I would need to buy an aftermarket amp to fix the issue. Seemed like they didn’t want to look further into my issue what do you suggest I do.
Nothing for the new body style GM trucks. GM locked the CanBus and started to use LanBus as well. So there is no tooling are ability for aftermarket companies to get into the trucks system to start reading or writing code :/ so currently we are stuck and moving VERY SLOW trying to figure a way around it.
I just had the linkswell 13.3 installed in my 2014 jeep and I had to go in and reprogram the button functions for what I wanted them to do. After that they seemed to work perfectly.
@@LinksWellInc The installers at Discount Audio & Wheels installed a separate microphone on the upper left hand corner of my windshield. It used to work but it stop working. I move out of state now so I can’t take it back to them. I can hear people but they can’t hear me.
So what about when the stereo thinks the tweeters are front door speakers in ram alpine? The installer s couldn't figure it out, this the fix for that? Front door speakers are virtually non existent but tweeters about to explode at 25
@@LinksWellInc Didnt work, instead of sound from tweeters it then put out no sound at all. installers spliced wires around to change the signal input but just flipped the driver/passenger climate/safety sense. Radio shows driver door open for passenger door and vice versa, and climate controls are now passenger controlled. Primary front sound still coming from tweeters and front door speakers acting like tweeters. This is for Gen 5 unit btw
@@LinksWellInc Also is there a fix for Android auto not connecting wireless and not recognizing mic? All calls come through Bluetooth, and no voice assist for Android or Bluetooth. Sorry for all the questions just trying to get it to function properly
@@SuPaFuPa420 have you watch the video I posted on connecting the Android Auto? Watch that. Then make sure the ZLYNK version is 4.0.18. I have a video on how to update the ZLYNK as well.
@@jeffreyguzman9230 so something must be plugged in wrong or something. The BOSE adapter has a 99% no failure rate. Literally I have seen like 4 go bad in 6 years. Have you verified all plugs are in the correct locations?
So is there no options like this for the 2017 mustang gt? Cause when I go to vehicle it doesn't show this this but fade and everything is stuck on -7 what's up with that???
I have no sound whatsoever from radio, I do have the stock amp in kick panel removed from. My 9 speaker will be reinstalling a stock amp to test this weekend
wow its like u read my mind i was just dealing with this
How do you get rid of white noise only come on radio mode or car play
I just installed this in my 2018 Silverado 3500, music sounds good but ive lost bass? No add on bass just oem stock, i do have the bose system and i do have the adapter installed.
@@tzaromega2317 so it could be that the factory amp eq is messed up.
Did you flatten the EQ on the factory radio before removing it?
I don’t know if you’re going to see this but I bought a apple carplay system, every time I change a song or volume hit 0 there’s a popping sound really annoying
You used a Caplay system with our radio?
Hey I try to install after market audio system but I can’t get any sound out put…what shall I do I have Honda civic 2013 couple with premium factory sound system(I have factory amplifier
@@shantanureddy8115 so I don’t know what you mean by aftermarket audio system.
If you are installing an aftermarket radio you need to get the correct adapter to retain the factory amplifier.
If you are adding aftermarket amplifiers you need to locate the factory amplifier and use some sort of Hi-Level adapters to get the factory amp signal to feed into you aftermarket amplifiers.
John, I just installed gen 5 in my 2015 GMC with Bose system. This remedy doesn’t seem to work for me as my application does not have audio settings in the vehicle settings. What do you suggest?
What I say in the video of reinstalling the factory radio. Flattening the EQ on the factory radio. Then reinstalling the LinksWell Radio.
@@LinksWellInc I read up on this before installing and was sure to do that before installation
@@benconner3619 so you have the factory EQ flattened?
@@LinksWellInc yes, I went through my factory unit before installing LW unit and put all the bars in the middle.
@@benconner3619 that’s interesting. So what is wrong with how it sounds?11
I have a Gen IV, and I notice the app settings are different like the one you show the icon to the left vertically the first icon is the satellite and the other one is basic, is there a firmware update?
Not yet. Mine is running the XM beta firmware.
@@LinksWellInc So why each Gen IV setting is different?
@@Akafoo247 not following? Gen 4 has 2 different UI’s. Our older and our newer UI.
Ok, that makes sense now I have the old UI. They pretty much work the same?
@@Akafoo247 radio wise yes. But updates and menus are very different.
I have a video on how to update the APP. If you run the 4.6 update from our website you should get the new UI.
I dont have the crackling. But on my 2015 ram 2500 with the linkswell xl gen6 volume all the way up at 40 i can barely hear the music. Running wireless android auto. How to i get the volume louder??? Factory alpine premium 8.4 was way louder.
@@TheLaughlin82 couple things. Try what I mention in the video. Make sure “Factory Amp” is turned off in System Settings.
@LinksWellInc factory amp is off. I've gone thru all your videos. And every setting I can find. Max volume on this radio is 40 and with it all the way up and my doors open in the quiet country I can barely hear the music. 😢 so driving down the road sucks barely hearing it and the forbid I roll down a window it's a fail
@@LinksWellIncok wierd thing just happened. I turned my radio down to 26 and Major clear volume...I'm so confused going back up to 40 volume decreases.
@@TheLaughlin82 so go to “Car Settings” in there is the factory amp settings. Adjust the volume and gains in there. See if that gets you more volume.
What was the "whether w/ amp" setting on that video for? I'm installing a gen 5 on my alpine ram this weekend.
Did you ever figure out what it was .. i just got a gen 5, had same question.
Nope. Never got an answer. Got rid of the unit since then. Went with a phoenix unit and super happy with it. Better sound quality and easier to use.
Strongly considering your radio for my ‘18 Wrangler JL. I’m planning on bypassing the OEM Alpine amp using PAC interface to incorporate aftermarket amps. This includes a T-harness for the big box plug. Compatible?
It is. But our radio has Preamp outputs and a TOSLYNK output. So the PAC interface really is used to make preamps from the factory radio hi level outputs. I really don’t know that it’s necessary for anything outside of a simple way around rewriting past the OEM Amp.
But if that what you want to do. Our radio will function basically the same as the factory radio would with that interference
@@LinksWellInc very good to know, much appreciated! I downloaded the install and owners manuals, is there also a remote turn on lead? Wasn't able to tell if it was in any of the harnesses. Thanks again!
@@durangodude01nj yes it has an amp turn on lead.
@@LinksWellInc thanks so much for your prompt replies!!
@@durangodude01nj no problem.
So by flatting the EQ on GMC bose, is that turning it all the way down on factory settings or in the middle on treble, fade and balance? I left mine in the middle and it pops even when there is no sound playing....
So if there is popping happening with no sound. That sounds like a completely different issue from this tutorial. Like a bad amp or something.
@LinksWellInc there is sound, and it sounds okay. What I meant was on boot up for example, or when I'm on a phone call with the volume at its lowest, the popping is constantly there. You don't hear as much when playing music, especially the more I've messed with the settings to try and make it sound better.
When and how will I be able to order a Gen5 radio for my F150 truck? Will you be selling these on amazon?
You can purchase now through any one of our authorized dealers. We do not sell direct to the retail public.
It will not be sold on Amazon only through authorized dealers. Amazon doesn’t offer support to their customers. If you want to purchase online it would have to be through one of our dealers that sell on their own website like;
www.adcmobile.com
or
www.fnaautomotive.com
2020 f250 xl, no premium sound but it does have an eq. same things to watch out for?
Not if it doesn’t have an external amp.
Just had gen 4 linkswell install in daughter's '14 F150. Is there a compatible amp that can push 200+W speakers and a small sub?
So any aftermarket amp will work with our radios. We have the same industry standard RCS preouts that will connect to any aftermarket amp.
@@LinksWellInc Thanks very much for the quick reply!
Hello, I recently installed an android radio for a 2013 mustang which has a pioneer amplifier connected with high level inputs and it turns on with the signal from the speakers but since I installed the Android the amplifier does not turn off when I turn off the car, do you have any idea of What could cause that? I am thinking that the radio continues to send a signal even when it is turned off
So we don’t make a system for the 13 Mustang. So I can’t say for sure what is happening because we didn’t build it to know how it is effectively doing amp turn on.
It could be the radios CanBus is set wrong. It could be the harness is built wrong. It could be something internal on the radio is messed up and not switching its signal.
2018 f150 no amp. Speakers distorting bad at volume 25 or higher. Dealer that installed told me I would need to buy an aftermarket amp to fix the issue. Seemed like they didn’t want to look further into my issue what do you suggest I do.
You are positive no amp?
Is Loud turned on?
What Gen Radio?
@@LinksWellInc 100% no factory amp. With loud turned on I can’t turn it past 12 before it starts to distort. I have the lite model.
@Linkswellinc Would the factory eq have to be flattened even with no amp? I’m not sure if the installer did or not.
@@michaelbowman7468 no. Only if there is an external factory amp that has a built in EQ like the Sony or B&O.
My is not giving me the option to move the feat
Hi Brother. Do you guys have the linkswell gen 5 for 2019, Chevy Suburban LT
Nothing for the new body style GM trucks.
GM locked the CanBus and started to use LanBus as well. So there is no tooling are ability for aftermarket companies to get into the trucks system to start reading or writing code :/ so currently we are stuck and moving VERY SLOW trying to figure a way around it.
I have one for my 2017 mustang, how can i get rid of music delay and skipping
If it’s in CarPlay update the ZLYNK app
Is there any fix for steering wheel volume buttons not working? They were working before and suddenly stopped
It probably do to the HVAC/CanBus protocol getting changed. Double check you have the right protocol set in the HVAC set up page.
I just had the linkswell 13.3 installed in my 2014 jeep and I had to go in and reprogram the button functions for what I wanted them to do. After that they seemed to work perfectly.
When are the GM Gen 4's getting the Gen 5 OS update?
It won’t. Gen 5 UI is only for Gen 5
@@LinksWellInc Booooooooo!
Is there a way to reprogram my microphone? People are unable to hear me when I speak. I have a Gen 4 and use Carplay.
Where did you install the microphone at?
@@LinksWellInc The installers at Discount Audio & Wheels installed a separate microphone on the upper left hand corner of my windshield. It used to work but it stop working. I move out of state now so I can’t take it back to them. I can hear people but they can’t hear me.
@@Jerrys_Adventures so it may be a bad microphone.
Does it work in normal Bluetooth?
@@LinksWellInc To try it with Bluetooth, I must have it unplug from CarPlay?
@@LinksWellInc No, it doesn’t work in Bluetooth either.
I got aftermarket subs and door speakers with 4 channel amp. I can’t get subs to work
How is it connected?
So what about when the stereo thinks the tweeters are front door speakers in ram alpine? The installer s couldn't figure it out, this the fix for that? Front door speakers are virtually non existent but tweeters about to explode at 25
Yes. Chances are this will fix that like I mentioned in the video. When the Alpine system cracks at 20.
@@LinksWellInc Didnt work, instead of sound from tweeters it then put out no sound at all. installers spliced wires around to change the signal input but just flipped the driver/passenger climate/safety sense. Radio shows driver door open for passenger door and vice versa, and climate controls are now passenger controlled. Primary front sound still coming from tweeters and front door speakers acting like tweeters. This is for Gen 5 unit btw
@@LinksWellInc Also is there a fix for Android auto not connecting wireless and not recognizing mic? All calls come through Bluetooth, and no voice assist for Android or Bluetooth. Sorry for all the questions just trying to get it to function properly
@@SuPaFuPa420 have you watch the video I posted on connecting the Android Auto?
Watch that. Then make sure the ZLYNK version is 4.0.18. I have a video on how to update the ZLYNK as well.
@@SuPaFuPa420 there is a setting in System that is RHD. Flip that and save and reboot
My "blows" adapter lights are cycling green yellow red and no sound idk why they aren't blue and playing like its supposed too
Did it work before? And stop?
@@LinksWellInc yes
Brand new unit out the box and 2 Brand new adapters $350 each and no sound
@@jeffreyguzman9230 so something must be plugged in wrong or something. The BOSE adapter has a 99% no failure rate. Literally I have seen like 4 go bad in 6 years.
Have you verified all plugs are in the correct locations?
@LinksWellInc yes disconnected batteries unplugged and replugged im at a loss
There’s a static when I play music or use maps on my Gen 5. How do I get this to go away??
Static? Like a white noise? Or actual static? What are you using for your audio source?
@@LinksWellInc it’s like a white noise. Using Apple CarPlay. But it also did it when I switched to a fm radio station.
CarPlay via Bluetooth
@@TannerMcAlpin aftermarket amps? Does the vehicle have the factory amp?
@@LinksWellInc Factory amp
Shit, Mine sounds so much BETTER than factory its ridiculous👍🤘
𝐩яⓞ𝓂𝓞Ş𝐦
And what's up with the popping in mine and when I listen to the radio the volume will go low and go back up ...
I have the same issue, when I press play for music, it takes 3 seconds to hear anything and sometimes skips
So is there no options like this for the 2017 mustang gt? Cause when I go to vehicle it doesn't show this this but fade and everything is stuck on -7 what's up with that???
And my eq on my stock radio was never messed with....
Where u able to fix this running Into the exact same thing on my 18 gt premium. All -7 and I'm unable to adjust alter them
I have no sound whatsoever from radio, I do have the stock amp in kick panel removed from. My 9 speaker will be reinstalling a stock amp to test this weekend
Does anyone know why is there a delay in music play and why does my music skip?