BJTs as Transistor Switches | AddOhms #10
Vložit
- čas přidán 7. 05. 2014
- Transistors are electronic switches that are used to control things that would kill an Arduino, Raspberry Pi, or Beaglebone.
Support on Patreon: / baldengineer
There are two major types known as a BJT and MOSFET. This is part 1 of a two part series, which looks at BJTs first.
Learn what they are and how to use them.
Show Notes:
www.addohms.com/ep10
Follow on Twitter:
@twitter
#transistor #bjt #electronics - Věda a technologie
Dude I've watched so many videos on transistors and mosfets (lots of 'big' youtubers in electronics) - but your visualizations and descriptions are the best I've found! Nice job man!
Too fast for me even though I kind of know this stuff already
Mother of God: an actually useful explanation of the transistor!
You, sir, are among two other people I've found on both IRL and the whole internet that actually tells how transistors work without rambling about "Holes" and "Electrons" and quantum magic.
Totally agree! A breath of fresh air! I am totally getting it now. Others bire you with way to much theory and equations, that you loose the plot. This guy gives you very simple formula and how and where and why it is used!
How transistors work: Quantum electrons mumbo-jumbo.
How to use them in your circuit: This video.
It's a long time since you've posted this comment, but could you link/tell me where the other two explanations are, if you remember? I'm still having trouble grasping the concept, thankee.
@@edwardfanboy
اهنگ
اگرین
Fantastic video editing and graphics. They both help support a clear presentation. I like this channel. Thanks for the video!
i cannot thank you enough for making this video! i've been trying to figure out for months how bjts work and i just had my "uhuh!" moment after watching your video. i couldn't figure out how to connect the more pictorial diagram for bjts to the schematic and the animation you included just solved that problem. really, thank you so so much!
Bryan D, ...define....."uhuh".....lol
I'm not an electrician, just a hobbyist but man, your videos are so well done, quick, and easy to understand! Keep up the AMAZING work!!
💖
I have to echo the positive and very accurate comments made about your video training style. It really makes things real and approachable. I like the suggestions of useful components to use in circuits like your idea of the suppression diode with part number provided. You are awesome--keep it up.
Excellent, understandable and perfectly clear video, Brilliantly done! Thank you so much!
This 4 minute video explained principle of transistor to me better than 3 years of uni and countless hours of other yt videos. Thanks!
excellent tutorial, with the added animations make it easy to understand....
very nice explanation! (currently studying electrical engineering and i thought this very insightful - especially the explanation for using a suppression diode)
I went through transistor theory back in the 80s. I have never really understood it until this video! THANKS!
Fantastic and very informative video, Thank you so much!
Hands down best explanation! And the practical examples make it even better!
just one word awesome, I was looking for these tutorials quite a longtime.
Real good videos! Thank you very much! Helps for electronic engineering students like me! Greetings from Mexico.
You have one of the bests channel here on youtube.
Even shorter and much more useful guide than GreatScott! ones. Thanks!
Really appreciate all of these explanation videos!
Very nice explanation and with pictures simplified for understanding Thank you with regards
Thanks so much for your explanation!!! It was soooo easy and clean to understand it!!!!! I love it!
I love the little tidbits of knowledge. Such as the Vcc origin's.....
thanks for the clear concise explanation
What a great video, full of practical Informations!Thanks!
Great video and good explanation
Very nice video! Keep them comming!
Awesome videos man... Waiting for more such videos
This was a very understandable lecture! Thanks
Clear and concise . Thanks!
This helped me to understand. Wery good video. Thanks. 😊
Awesome tutorial!
Great transistor lesson,big 👍 from new friend
Very good tutorial. Thanks for sharing
Nice video, well done, thanks for sharing it with us :)
Great explanation. Thanks
Thanks for the (very) clear explanation! :)
Very good video my brother... Excellent!!! Thanks
awesome and quick explaination
Nicely done!!!!!
Great stuff! Thank you!
Fantastic Video! As a studying engineer trying to demystify what the hell I do with a transistor this video is amazing! I'm so sick of hearing about pnp/npn, holes, CE configs etc. How do I apply it!? Subscribed.
Just use your imagination for pete's sake these are tools to preform work with.
awesome explanation
Nice tutorials, thanks.
Very good job for basic electronics
Have you got the PNP video up someplace? Thanks for the content.
Really nice video, thanks.
Here I was trying to build a transistor switch for my raspi withouth ever having learned how a transistor even works (or I did and it's just been too long ago). So thanks for your help!
Easy and cleared explained. Good luck with your job. I will cross fingers.
Muy buen video, regards from Oaxaca Mx.
wonderful! Many thanks!
great explanation
What are the advantages or disadvantages of using a mosfet to say drive a flyback over using a bjt? Thanks
Thanks for information
thank you for your video
best explanation ever
thankyou great video
well done !!!
Are 1mA and 100mA the maximum of current allowed before it starts to become a risk for the transistors? Also, if the a certain voltage and currency goes from B to E and another from C to E there's an increase of the total voltage or current from E to forward?
best explanation
I liked your video as soon as you said BJ transistors instead of BJT transistors.
Thank you for a quick intro to transistors. In your example you connected the motor to the collector. Would it be okay to connect it between Emitter and ground instead? What would be the difference between the two?
Bernhard Kohlhaas I was wondering that as well - could somebody explain?
Excellent.
Great tutorials, thx for the effort you put into these vids. I'm in the middle of a few projects but haven't started using an ICs yet. With the info you have shown here in your tutorials, makes my circuit building a bit easier....and I can stop releasing the factory installed smoke in some of my components lol. A quick question, when would you decided to use relays over BJTs or MOSFETs? Or vice versa...
+OnlyNeed1Shot Relays are good for very high current DC and all AC. You almost always need a transistor to drive a relay's coil from a microprocessor.
AddOhms ok makes sense. Thx again. I have a few AC projects I'm working on with transformers, fans, Motors and such.....but no ICs, so I'm trying to design a control circuit using the components I scavenged from many electronic appliances I have torn apart. Needless to say I have fried a few components while testing my circuits. Maybe I'll try and design a small DC circuit on battery to control the activation of the ac circuit via relay activation.
great video, would you also happen to have one on the functionalities of an IGBT?
+Pierry Louis No. I haven’t worked with IGBTs much. I understand them to be basically a BJT driver for a MOSFET, in a single package. That’s as much as I know about them.
AddOhms oh alright, thanks for the heads up. It's just that you really explain things pretty well and I saw it on the video.
thank you sir
Please do a video about PnP transistor as well as current amplifier
thanks. I like it.
Finally, somebody drops some math... Finally got the concept, thank you!
I had also been struggling with that. All the videos seem to be "dive right in" which is fine if you want to mirror the exact setup but if you wanna experiment, you've no theory to do so.
Fantastic
Good tutorial
Have you considered doing a tutorial on the operation and interpretation of characteristic curves of FET transistors?
I wrote an article on MOSFET curves here: www.element14.com/community/community/element14-presents/workbenchwednesdays/blog/2019/08/07/reading-mosfet-curves. And I did a video on the Miller effect here: czcams.com/video/bw_ZIye2j64/video.html
Did the 3.3v applied at the BASE cause the the transistor to turn on? And by it turning was the 100Ma of current allowed to flow from COLLECTOR to EMITTER?
very good,tks
Nice explanation, but I was so hoping to get an insight into PNP BJTs, and what the point of them are.
Something I plan to cover later. A quick generalization is that NPN sinks current while PNP sources current. So you'll often see them used to switch "on" a path to ground. While a NPN will be used to switch "on" a path from the positive supply.
They're very popular in differential amplifiers and can be used in push-pull amps used for audio.
Hey there
I have a problem, I have an integrated C.I. PT2272 6-volti want to control relays of 6v but it seems that the output of integrated does not have much power that the integrated output is down 5 volt to 2 volt and the transistor is not saturated that I could use transistor I used the built-in 548 bc is supplied with 5 volts but the relays are supplied with 6 volts is something like what you did in your circuit
thanks for help,
Helpful video but correct me if I'm wrong, I thought the data sheet said the "beta" would be 70 at 1ma, not 100? 100 was for 10ma from base to emitter?
Beta depends on the collector current not the base current. Both temperature and the voltage drop from collector to emitter can cause it to be different as well. It varies on such a wide range of conditions that it is difficult to state a single value. However, for a 2n3904, 100 is a common number that is used.
1:45 I've always wonderd what the CC meant in VCC, now I know!
Yep
can you use it just as a momentary switch that connects a microcontroller pin to ground?
1:54 , 1mA is flowing from B to E, and then u said when that happen we get 100mA flowing from the collector to the emitter. what i don't understand is from where we get that 100mA current? i mean the collector isn't connected to anything, so it's like an open switch.
great videos by the way, keep it up!
+Heisen Berg It is implied that the collector is connected to a supply.
Hmm, as i think about it, my question was really dumb haha, i'm new to electronics.
Thank you :)
Pretty valid question, I was missing that too. While I knew he probably meant to add a PSU. A video for beginners shouldnt imply stuff which make things vague. Other than that one of the better videos on using transistor in practice.
Very good tutorials, teachings indeed. However, i think it will be better if you can make a real circuit including the component in the tutorial. That makes things a lot clear (at least for me) when components are in action.
is the AUDIO TO 11 a reference to The Spinal Tap? :D
+squalazzo Yup. :-D
@time 1:55 How did u calculate 1ma of current of u only had the voltage and not the resistance?
I didn’t. I just picked the value.
God bless you for the animations and clear visuals.
I'm going to cancel all plans this weekend in order to feast on your channel :3
May I know what software u used to present your drawing ?
+John Lim After Effects. Well, that’s what I used today. This one was done in Motion 5. #14 is when I switched to AE
'The code's more what you call guidelines than actual rules' Hector Barbrossa
Holy guacamole, this channel is amazing! I have been using your videos to help me freshen up on common electric devices as a return to school. Thank you so much!
what is that voltage spikes??
where can i learn short-cut form (like VIO, HF, IC and IB)?
am adicted to this channal.
Nice tutorial. Could you please guide me, I need your help in understanding how to convert 230v dc to 230v ac using transistor.
You need to build an inverter.
@@AddOhms inverters are 12v 24v or 48v. I have a power bank of 230v dc can I use mosfets to convert dc to ac without an inverter?
Why did you pic "100" for the Current gain from the datasheet. I don't understand that part. There were other numbers to pick from. Why the 100?
Good question.
The reason I picked 100 is from experience with a 3904. There is a range of values which depends on the voltage drop from Collector to Emitter and then how much current is flowing through the collector.
Also notice that the range is from a *minimum* value to a maximum value. So even if your conditions show 30 on the data sheet, its likely going to be higher anyway.
thanks
I would like to make a 24V pulse with a width of 300ms with an Arduino to give the logic low/high. Is it possible to use a bjt or MOSFET as a switch which the logic low/high is fed into?
Yes
I do understand that there would be voltage spikes but, how does the diode in parallel to the motor protect the transistor from voltage spikes?
The diode isn’t for spikes. It provides a path for the collapsing magnetic field.
Dear AddOhms, just one question, Is the bjt transistor completely unstable to temperature? I mean without an emitter resistor or a heatsink Collector Current will keep getting bigger even if the initial one is around a few milliamps?
Yes. Their gain is temperature dependent. It’s why I rarely use discrete transistors as an amplifier. I’ll use an op amp instead.
Im trying to make a led blink rapidly with a pnp.
Hello. I want to make a transistor switch for a high power LED that consumes 700 mA. The switch will be controlled by a 5V Arduino. I made the current source by using a LM317T. I am between using a TIP29C BJT and a IRF510 MOSFET. What would you recommend? Thank you.
mmitza The 510 may be overkill, I'd go with the TIP29C.
Ein Lachen Mittagessen....Wünsche....
Great tutorial! Very clear
Great video ! Maybe you can make a portuguese subtitle for i send to my friends in here on brazil.
Thanks !
How do you know whether you're facing the front or back of the transistor? Or does it not matter as long as you wire them correctly?
?
All components have ways to identify their “direction.” (Well except non-polarized parts like resistors and standard ceramic capacitors.)
In the case of through-hole transistors, the TO-92 is flat on one side and concave on the other. For a TO-220 one side is flat with the rectangular package sitting on top.
You match up the component with the data sheet drawings.
Now, if you’re asking does physical orientation matter? Well, the components don’t care which way they face. They aren’t shy.
The keyword I needed was "non-polarized". When I first started out, I wanted to be sure I didn't put the resistor in backwards. But being non-polarized, I guess It doesnt matter.
@@josephkreifelsii6596 Also, as far as transistors go, be sure to read the datasheet for the number you're using, as the EBC designation can change. For example, if you're holding the flat part towards you, the connectors may have the designation "EBC", while in another model it could be "CBE".