Miniature Flat FOUR Nitro Engine - Assembling & Testing!
Vložit
- čas přidán 31. 10. 2023
- ►Stirlingkit Black Friday: bit.ly/3R5Wchv
►Get the engine here: shorturl.at/als15
►Starter kit: shorturl.at/epM35
---------------------------------------------------------------------------
Engine Specs:
FS-B400
Displacement: 14cc (3.5cc x 4)
4-Stroke
Bore: 16.68mm
Stroke: 15.40mm
Air-cooled
Lubrication Method: Mixed Oil Splash Lubrication
Electric Start
Spark Plug Type: Four-stroke F-type Glow Plug
Fuel Type: 20-25% Nitro Fuel
Weight: 1850g
Dimensions: 18.4 x 15.2 x 14.1cm
-----------------------------------------------------------------------------
►Subscribe! bit.ly/2m1d1y7
►Instagram: johnnyq_90
►Support my videos!: / johnnyq90 - Věda a technologie
Would be cool to see you make a split-pin crankshaft and accompanying camshafts to turn it into a proper boxer engine, so it won't shake itself to death from the crazy rocking couple caused by the shared crankpins
Flat engines are designed like that tho, thats what makes it a flat engine and not a boxer
@@gundamned4879 Flat plane crank, like the Corvette Z06, which sounds awesome.
nop not the same thing@@allenl9031
Well, the engine is tiny it could be a 1 can thumper and still rev to 30,000
@@allenl9031 Yeah not quite the same there, 'flat' is referring to crankshaft setup for horizontally opposed engines, flat engines use shared crank pins for opposed pairs like a V engine, Boxer refers to those being 180 degrees apart so the pistons move opposite to each other and cancel out more of the vibrations making it smoother, both setups are still flat plane.
Can we expect a set of UEL headers to get that signature rumble sound ?
Still wouldn't sound quite right unfortunately, Subaru and VW are specifically boxer 4's. Boxers are flat, but not all flat are boxers.
Boxers have the opposing pistons synchronised to reach TDC/BDC at same time as each other whereas you can see on this crankshaft the piston on the left reaches TDC at the same time as the piston on the right reaching BDC
You mean that vomit inducing sound that makes me that accepts that people have different tastes in car culture than me and respects that fucking hates with a passion
It won‘t rumble, it‘s a flat 4, not a boxer.
Flat 4 is basically a 180 degree V, two pistons share a crankshaft pin. Boxers have a pin for each piston, which means the movement is different.
@@Phrew It will. even an inline 4 will rumble with UEL headers.
@@Phrewthat literally has nothing to do with the rumble sound caused by the unequal length of the exhaust header. The Shelby gt350 is a flat plane v8, but it doesn't sound like a flat plane v8 because they use unequal length headers.
love the load testing as well demonstrates its really weight carrying capacity
That cooling fan looks so cool. Reminds me of an air cooled 911 engine.
9:58 I think it's because that belt is stretching out and the slack is getting pulled into the fan. You can see it stretching the first time it runs during revs.
but you don't really see it getting pulled into the fan, I suppose its just because of the high rpm. the pulley ratio is rather big so that fan is spinning like twice the speed of the engine
This has to be one of my favorite toyan models! I own the first FS-S100A and it still runs amazing after almost 3 years.
I believe the reason the fan broke is bc if you look @6:18 you can see that as you rev the engine the fan belt starts expanding quite a lot, I'm sure the belt came off the pulley and got sucked into the fan and caught between the fan blade & shroud.
I miss this kind of content, while I like seeing these different engines being run its nice to see them do some work rather than just a static run test. Hoping for more videos like this in the future! 👍👍
This is what i missed, doing something with these engine builds! I love watching your modifying and/or use of these engines in something other than a static display. Looking forward to "something larger is coming!"
Ikr theyre so cute especially the overhead camshaft was so small!!
Imagine a miniature VW Beetle with this engine, so cool
My first thoughts exactly !
Dune Buggy with visible engine.
it would be awesome if you could also get the "tweet" note out of the exhaust!
It will never be a Beetle because this is not a Boxer engine.
@@albinklein7680 The boxer engine is a flat engine, belonging to the type of internal combustion engine. The engine pistons are arranged horizontally and symmetrically on each side of a central rotating crankshaft. When operating, they move continuously and in opposite directions, transfer force to the crankshaft, helping the crankshaft to move. It’s called “boxer” because the way the pistons move is like a boxer throwing punches. You have just learned something today.
i was just thinking about setting up a somewhat bright nightlight in the bedroom, h7 seems like a good idea but i didnt know how to power it without some awful power adapter.
this seems to be the perfect solution, the wife's going to love it!
Rather than metal rings, probably would've made this work with teflon ones. It rides better, seals better, doesn't wear as much and there's never enough heat in such an engine to touch the teflon. Back in the day, it was my favorite method to make a very long term flying (endurance race) RC. Also, they keep using flat pistons, but just like the real deal, shaped heads have better ignition, heat distribution and compression.
Looks like the air cooled 911 look. Would be sweet to see a flat 6
That is one of the best sounding engines out of the box !
This guy is going to aquire all possible knowledge of cars and build us the ultimate RC vehicle no DIY person has done before
Absolutely beautiful piece of engineering.
So hype for the coming dyna !
Thanks for the vid.
I love these vids so much. Been watchin forever. Thanks for all the awesome content 🤘🏻🤘🏻🤘🏻
This thing is just the ultimate cuteness! I'd love to see you hook it up to a car or rc truck and see how competitive it is.
Flat 4 and 6 engines are such runners...
I wasn't expecting this a flat 4 miniature engine. This is interesting.
Good call on trying to find out power output, you can always improve it in the future, with big resistor for exemple and trying to find out the efficiency of the system
On the Toyan FS-L400, same number of cylinder, fuel and displacement, they give the power output of 3.05hp, so 2200 watts... yeah, right...
Now, combine 3 of them and build a Ferrari 312T2 around it!
Hey if you didnt see it, on the Adam Savage Tested channel, they recently went to a makers fair and were showing some pretty amazing little engines.
Love the generator idea. Make it so it can be used to charge a car battery then run an inverter off it so you can run stuff in an emergency
4:37 could probably make a quick and dirty C shaped cradle that goes in that gap and hugs the crank case, affixed in place with the existing leg bolt(s). From it, simple flat legs could come out that later could be engine mounts (for example).
You could use the rubber isolators used for radios, test equipment (you can find them online with "vibration isolator electronics").
Thank you man for this awesome history about out sports. Will be waiting for for. Thanks once more
This little jewel would be perfect driving, for example, a Porsche 550 Spyder, the one owned by James Dean. Congratulations, it's beautiful!
Alright! You are making a dyno!! I love your videos!
The mini motor master back at it
Those torque click shots are what i’m really here to see.
That’s awesome! But the single rotor rotary engine spins at over 30,000 rpm.. imagine a miniature 4 rotor!
Yeah I noticed when you put the timing belt on after tightening it the crank mark was out by one tooth. 3:57 it moves after tightening it
Yep. Watching in .25 speed @ 4:00-:03, the cams both move with "left" cam moving the most. The timing marks should be more precisely located and indicated so all builders can get valve timing right the first time.
Nice kit
😮😮😮 I know what I want for Christmas
Thanks Johnny 👍🏻👍🏻👌🏻
Relly has good footage and an excellent "dyno setup" Well I sort of talked about that idea 9 months ago, in a coment I made, a bit tricky but very nice. I'm an electrician and we use dry resistant or a dry generator coupled like that set up for engine-generator tests and it's good to test temperature and horsepower/ consumption. Just need to make a conversion on the load/ Jules/power output/ time. You have charts conversions online. Very nice 👌
It's really the brand that best manufactures its production, offering excellent value for money.
OMG ITS PERFECT... for a Impreza build.
You have a great life Mr Q
You have videos like therapy
This Chanel is amazing
Hmmmmmmmm a nice Porche build with this engine would be stunning O.O
soo much torque
Would be GREAT to install in an Vintage Vw Buggy RC Car!!!
I'm currently rebuilding my Lancia Gamma engine... this looks oddly familiar ^^
This is very cool video and engine.
Круто !!!
Мне нравятся оппозитные моторы !!!
Есть в них что-то такое....
Думал опять какая-нибудь пневматическая игрушка, но оказалось что нет. Нормальный мотор !
It's like Christmas, Birthday, Easter, Thanksgiving, Halloween together.. Can't wait until you upload a new video 🤪🤪🤪 Greetings from the Swiss Alps 🤪🤣🤘
Sound so siiick
Too bad it's not a boxer
How is it not?
@@DavidGragg82cylinders are not opposed. It's a flat 4, not a boxer 4
@@dantevito1193 yep telltale sign is that a boxer doesn’t share crank pins
the opposing pistons always move to another or away from another. the crankshaft would look a lot different.
this here is the same as a V engine, only not at 60° or so, but at 180°@@DavidGragg82
Naw man why would you wanna have to deal with a blown head gasket on your model engine 😂
that thing is awesome, I love how the fan is directed to blow right on the block
I was just thinking about your audience. Probably us who actually enjoy building things, engines. Cool so see such a tiny thing work.
C'est juste magnifique
9:58
Something “hit the fan” whilst showing off 😂
I was trying to figure out whether this was a VW style boxer, or the "modern" Subaru boxer style. After seeing the overhead cams, I'm thinking the model designers decided to take a bit of both and build a Frankenstein engine of the two. It's "technically" an air-cooled Subaru, but I could be wrong.
gotta put that in a 1980 aircooled porsche 911 rc model. nice build.
What were the engine temps like with the fan cooled engine?
Great videos. Would you post a link to the tools you use please? Thanks! Most interested in the cordless screwdriver and torque screwdriver.
When I saw the title, I was thinking that it would be a subaru type boxer engine, but no, because the crankshaft is different.
Good video
Hey, I have been wondering all these videos, what torque screwdriver are you using?
Nice Boxxer Engine.🤩
Cool hook-up to the wattage meter!!! Love ALL your videos!!! : >)
What brand of torque wrenches do you use ? thanks
Assembly time? Looks so cool!!
Today's a better day now, JohnnyQ90 fix, time to build a Subaru WRX Monster with that flat four.
i rely miss seeing you mod RC cars
Love the primitive dyno
I wanna see upgrades and retesting!!
These companies that make these engines should make a little diesel one that would be cool
That is so crazy... those piston rings tho... does the gap close up? they seamed to have an awefully big gap in them... So amazing how it is a REAL ICE and has a lot of the exact same componants, just shrunk down!!! I get so amazing watching these and would love to own a bunch of these myelf, but this would be a hobby that got out of control and my wife would kill me for spending that kind of money on a small engine, LOL.
As an STI owner, I approve.
Sadly it’s a flat four (like a flat V essentially) not a boxer 4 like a subaru due to the shared crank connection. You would have noticed that opposing pistons reach TDC/BDC at the same time respectively so you’d get pistons 1&3, 2&4 firing in sync rather than in an order like a subaru
180˚ V4... I’m still waiting for the miniature NR engine 😊
@@currymejesus4206 oohh i didnt know that!! thanks for pointing it out!!
@@TumzDK ahhh ok thx, you'd think I'd know the difference lol.
Wish it was a TRUE Flat 4 = Boxer engine. It is 'just' a 180° V4, sounds like it too. Thanks for sharing!
Would be nice to have smaller ring gaps and a lot less deck height. Toyan have come a long way though
What torque wrench do you use and do you like it?
The level of detail on these components is staggering ..
Now imagine making a scale size sand rail with this in it.
I just ran mine through a 3rd tank. This engine is amazing when the carbs are set right! Beautiful engine too! Though yer two cam dots faced down and it still ran. Mine were faced straight up. And it ran. This is weird.
It will almost always run because it needs no spark timing due to the glow plugs.
@@albinklein7680 yeah I know. Not my only nitro engine I've had. Mainly focused on valve timing. As those do need to open at a set time
looks more like a boxer engine, very very cool!
how do you transfering the power from engine to the bulb? Could anyone please explain me where do you put the cables or full tutorial? Thank youuu
We need some cam adjustment so its firing a tad bit more early so it rumbles on idle
Would you be capable of making a mini turbo to test if the reaction is the same as full scale ? and test it on other engine not only this one.
Rc plane build with this engine? Might need to machine off some material to save weight but if anyone could do it you could!
What if we give electric current to glow plugs only on one side ? Will it work ? Or it may sound different?
Nitro engines remind me if being a kid.
That crank makes it a 180° v4
What brand of transmitter are you using??
The company needs to build a 1900cc E85 version thats fits into a VW beetle
Where do you buy the aluminum extrusions?
Time to build a sand rail 😁
i had it hard all the time please explain : why don't you put some cream on them head pad first before mounting every head?
Mini subaru RC car possibly???? Subarus are my favorite and I'd love to see tiny little UEL headers.
What kind of RC model would you run a motor like this?
You can find the hp if you messure the watt output of the generator but don't forget the power loses
Can you just use diesel fuel with 2cycle oil as I runs off of glow plugs the same as a diesel
man, I could power my Steamdeck with this thing!
Are there any upcoming videos for the 1/5 car?
What is that little torque wrench you use?
Can you use the fans as a supercharger?
i wonder the way to make sure all the plugs were working in a multiple system
need an 1/4 80s porsche and a light platform to make it a rocket
Porque vc não tenta usar dois anéis com lados opostos nos pistões pra melhorar a vedação dos cilindros.