23 inch work area ?? Sculpfun S30 Ultra
Vložit
- čas přidán 8. 09. 2024
- If size is your thing, this machines has it. Even with the added size, it is still rigid enough to support the 22 watt module. It has a 600x600 work area with auto air assist that works well.
@SCULPFUNReal
Facebook: / sculpfunofficial
Facebook Official Group: / sculpfunusers
CZcams: / sculpfunreal
TikTok: bit.ly/3lKPdgZ (@sculpfunreal)
Official Website: sculpfun.com/
Instagram: / sculpfunofficial
Twitter: / sculpfuntech
For templates that I have made, check out my Etsy shop. I build files for projects and tools for laser engravers.
www.etsy.com/s...
For Clack Shack shirts, check out my store:
the-clack-shac...
The links below are affiliate links that will direct you to the product in this video. If you use this link for a purchase, I will receive a commission from the purchase. I remain unbiased and honest in my assessment as always.
Sculpfun S30 ultra 22 watt direct-shrsl.com/46lm7
Amazon Sculpfun S30 ultra- amzn.to/454noBJ
The Clack Shack on Amazon= www.amazon.com...
Nice to see a Sculpfun review. I agree, the four screws system is burdensome to adjust. But I've learned to live with it. I have the more powerful 33w laser. I liked it so much that I upgraded my 5.5w smaller laser bed kit also to the 33w so basically I have medium and large 33w versions now. Lol. They've just come out with a Sculpfun Camera which I should be installing tomorrow. Included in your kit should be a few round metal stands to support the honeycomb so you can avoid the blowback on the rear of the piece. And, just a FYI, they have officially approved use of this model for 18,000 mm/min for the x axis speed. I have a link if you want to watch the video.
Yea, they sent the little pillars but I usually use thinner magnets. I also have the camera coming to try out. It looks like a good option.
Very nice video~ Thank you so much for your support!
Thank you too
Thanks for the review. Maybe some company will build one with size and features instead of either/or.
I keep hoping..
I have the Sculpfun S30 Pro 10w and really just learning to use it
Keep learning, it is fun
I've been looking into replacing my older Atomstack A5Pro, and im rather confidently leaning towards getting this one since the A5 just wasn't cutting it. :P Thanks for the review friend!
Very welcome, have fun.
@@TheClackShack Will do! I do have one small question though in regards to the 22W vs 33W versions. Question is, im not certain i should shell out $200 more for the 33w version as opposed to the 22w one. I do plan on doing a decent amount of cutting as i like to make those multi-layered mandala hangings amongst other things. Thanks again!
@@-Lotek-The-B0T-ASSASS1N 33 cuts better, only real difference
Thanks for the video
You bet
If I had to 3d print a cover for the limit switch, I would go the whole hog, and print a bracket and trigger so it could be mounted on the bottom of the rail.
Agreed. That would be much safer
This is a definite contender in my search for my first laser engraver. One weird one I came across tonight is the Snapmaker Ray 40W. Do you have anything to say about that one? Seems to be lesser known to the community.
I haven't had a chance to check that one out. I can't say I have heard of the brand either. The S30 is a simple yet effective machine. My only complaint was the cable management but I fixed that.
Great review! I am a little confused though, mine has thumb screws to adjust the laser head. Still a little bit of a pain, but a lot better than the setup you have to deal with.
They have thumb groves with Allen heads
Hard to get to by hand, tools better
Great vid! I'm new to this, if I just want to engrave on the surface of wood (and not cut through it) I wouldn't need a honeycomb backer, correct?
You can cut without a honeycomb but it does make it easier. For engraving only, you do not need one but it isn't a bad idea to have a fire resistant material under the work area.
@@TheClackShack good stuff, thanks
Hi,
Very informative video! Do you know if the Sculpfun S30 Pro Max 33W laser can cut 1/8" gloss black acrylic and 0.125" white or black polystyrene? Please let me know.
Thank you,
Ed
It will cut black acrylic, diodes have issues with white. I haven't tried polystyrene. Black maybe
Great! Thank you very much!
Great review. Do you have any other recommendations for 600x600mm that won’t break the bank?
There aren’t many 600x600 machines out there. Most are smaller or bigger
Where to buy this machine?
amzn.to/3tyOYJE
This has the worst laser head design and it goes dirty very quick. I have been sending @ sculpfun videos and pictures and the careless to fix or reply. I barely go 18 hours without disassembling the head and re-cleaning the lens.
They don't have an easy head removal - 4 screws behind the laser head and they are very hard to reach!
the PCB board on the laser head + the laser cable connection will soon break because of repeated short intervals of cleaning. The cut + engrave results are consistent.. yes, I replaced it with an Anti-fog lens from their support but it's still the same.
I have a 1000x1000 x 500 enclosure with 500w inline exhaust and the head still goes extremely dirty!
Beware if you have large amounts of cutting
With my exhaust setups, I do not have any issues.