Making my Mercedes Benz W211 E55 AMG CD Changer Slot into a Hidden Storage Compartment.
Vložit
- čas přidán 19. 06. 2024
- This is one of the ways to retain your CD CHANGER compartment door once you replace your factory radio with a aftermarket unit & 6CD Changer.
Since the door wont open due to it being a Canbus signal. This is a way to control and have access to the door.
amzn.to/3iJh8bt - to buy switch relay with remotes as in video.
Check out the tools I used below n some extras.
Special Thanks to Devin Simmons for sharing this process with me so I could share it with everyone.
VISIT Xotic Solutions
xoticsoluti...
PANZER'S Must Have Items for the DIY
amzn.to/3sP0ATT Nylon Panel Tools
amzn.to/3sToi1e Solder tool Kit
amzn.to/39dc1Nq Special Engine mount tool
amzn.to/3iIqtA4 W211 Hood Shocks
amzn.to/2MlxH0G Mounting Jack pads
Visit Link below to acquire your secondary heat exchanger & aftermarket parts for Mercedes-Benz & BMW & MORE
www.suvneer.com/?ref=ai-nnloc_be
Email sales@suvneer.com to acquire any item in the website via link above if out of stock^
Any purchases made with link above helps for future video content and improvements for video quality. :)
VISIT my Instagram account for updates and vendor part details
/ panzer_w211. .
RESEARCH - WRENCH - PERSEVERE
Get your shirt here. Proceeds help me acquire better equipment for future videos & Projects
teespring.com/new-der-panzer?
...
VISIT AND MAKE YOUR OWN STEERING WHEEL AT
/ rucarbon - Auta a dopravní prostředky
works a treat, can't stop making the door go up and down, thank you very much.
Just wanted to say thanks so much for posting this video. Have been looking for a way to get the cubby to work for years now, and got the same module and wired it in the same way and it works beautifully.
Another great video man...👍 Please don't stop with W211 Mods....
Thanks, will do! :)
I have been searching for this exact thing for a long time. A tip I've got is to add the name MOST system that's the of the loop with all the different devices which the CD changer is a part of. I was searching for that might have found your video faster. Thanks for the great instructions much appreciated.
If you use this remote relay for opening and closing the CD changer I recommend putting the remote unit in Momentary mode. If its not, power stays on to the motor if its in latched mode like whats being demonstrated in the video. This unit is sending voltage to the wires which runs the motor. The with the second button it reverses polarity which reverses the motor. In latched mode the voltage does not turn off when the door is open or closed. In momentary mode you have to keep your finger on the remote button to open the door then you release it which stops the voltage. Press and hold the second button which reverses polarity and the door closes, then you release the button. Even though the motor does stall at the end of each cycle (door open and closing) for the time you release the button this does not appear to damage the motor or draw enough current to blow a small 1 amp fuse. There is a momentary contact switch on the CD player which was used for the original function and could be used to stop the motor but this would involve more circuitry and does not appear to be needed.
nice video mate. thats a cool setup with remote. i have this on my e55 w211. the switch is hidden under the steering on top of foot well. hidden away. it is good for putting wallet and small things like that but a little awkward for my big hands to get around the gear selector when putting things in and pulling out. sould be fine for smaller hands though. ill post video of mine on my yt.
Thanks for doing that!! Can’t wait to do it in my car!
Good luck! Simple job and very easy to do
Ive been thinking of this and I’m so glad someone ended up doing it. Looks cool and great
I also have been wanting to do this for sometime. I am hoping this helps out the ones wanting to do this themselves.
@@PANZERSGARAGE it does not really work cd changer in anyways waste
Good info thanks for sharing.
Glad it was helpful!
I thank you for this video. I am changing oem stereo and was chocked because the eject key didn't work. Now I know why. But what is the other solution if you don't use the relay and remot?
Is it just a case of you need a way to power the motor? Do you reverse the polarity again to close it? Thinking of this solution vs other potential ways of doing it....key is going to be the logic required. (Arduino/raspberry pi zero or something like that might lead to some interesting ways of doing this).
is there a WIRED version of the switch relay? Would like to discretely (secret) mount a button to activate the door without the extra fob to keep up with. Great video by the way!
Very cool! But is it possible to just use the button? I put a fibre optic loop on but now the power for the charger. Want to use the space.
Can you drop link what remote kit you used please?👍 Thank you
How much volts is the battery? It opens so quick and smooth
Amazing , but how the motor know to reverse when its in open position ? Because i see only 2 wire that going to the motor ! No forward and backward option ? Maybe there's switch into the motor himself that tell him in what position they are
Please help i have 2004 e320 4 matic and am using factory stock radio i did it all just like you did but need to know what wires go to relay
Need your help bro got 2004 e320 4matic i want t9 keep factory radio but lose 5disc cd changer and do what you did
You put the changer back in anyways 😂this car is def a pain for me
I would like to see page were you got this from i looked everywerd
Pretty much!!!!!!!
Is it easy to remove the CD changer guts?
Can I fit this on my c 230
Wondering if mine is a different unit ay 11:14 you've got it folded but it looks like on the fold yours says 6/12/24v cathode.... where my schematic reads 220v live line...which looks like household mains AC voltage....
wondering if I was sent a version for a house not a car...? Not sure if I van just wire it up your way and hope for the best as it visually looks identical to yours....
In case if helps others there are two versions of this switch which look almost identical make sure you get the 12v not 220v version! I've returned mine and ordered another.
Show it installed in the car please! Also what head unit replacement did you go with?
I will definitely update this on the next video along with the radio installed. I do have the radio with me in question. I'm just waiting for my DVR Camera to come in so I may begin with the video.
Hey buddy, I for the life of me cannot get the actual changer out of the control housing. I’ve tried, and I’ve got the unit out and off the dash, but getting the changer out, to put in the compartment is killing me. Can’t find anything on the web.
Do the hazards and headrest drop buttons still work after you change this or does it only affect the cd changer button
When putting this relay it’s only for the door. The other harness that is yellow is for other functions like hazard,warmed seats, head rest drop etc.
Question: some after market radio’s ensure this canbus keeps working(at least steering wheel controls) does that automatically mean the door will also still work?
Yes & yes.
A proper aftermarket with a cannus module.
@@PANZERSGARAGE thanks for the quick reply friend
I have a problem my radio turns on and off and my CD changer won't open 🆘
Waste of my time lol