Timing was advanced people hes got the one in the camshaft right but on the crank the the little crack to the left has to be where the line is at. It's about a tooth off
The key is not a timing mark. It’s a tiny mark on the crank gear. He needs to turn it a couple teeth clockwise. That’s about where the mark is located on the crank gear to line up with the mark on the block.
Im sorry Im not seeing the mark on the gear, nor on mine. I do see the mark above it on the block but thats all. My struggle is real and I cant find any help around this issue
Talvez la cuña coincida pero, el piñon que se encuentra situado en ña punta del cigueñal posee como un disco en su parte trasera y en ese disco se encuentra exactamente la marca del PMS es una especie de ranurita.
Is the crank's alignment mark the same as the 0 dwell mark on the pulley, ie, can they both be used interchangeably to set the crank's angle for the timing belt installation?
Todo es posible, solo que para reemplazar la banda del tiempo, debes remover el cover plastico y pierdes la referencia para el damper o polea, el cigueñal siempre sufre algunos movimientos el todo el proceso por ende lo correcto es guiarte por la marca que se encuentra en el sprat del cigueñal, algo mas, esa marca a la que te refieres es mas utilizable a la hora de tirar el distribuidor para que la chispa rompa en el punto exacto y para lograr eso, necesitas una especie de pistola que proyecta un rayo de luz y segun mueves el distribuidor con el rayo de luz logras ver exactamente cuando la chispa rompre en el PMS
Ryan Wilson that’s not correct, if you look there is a small v notch on gear. That lines up with the round mark in engine housing. On this video it shows the notch well before the mark on engine case
Richard Pedroza you line the slot on crank with the mark on engine housing then you have to check the alignment mark on the engine with the hole in the camshaft gear. If you cannot see mark through the hole in the camshaft gear then the engine must be rotated another revolution. It’s much easier to do if the timing belt is still on the car and the plastic crank cover is still on. Then you can align the mark on the harmonic balancer with the 0 marked on the plastic cover with the mark aligned through the camshaft gear. There are other videos on CZcams that do a much better job on timing belt installation. Hope this mess I typed helps
Timing was advanced people hes got the one in the camshaft right but on the crank the the little crack to the left has to be where the line is at. It's about a tooth off
The key is not a timing mark. It’s a tiny mark on the crank gear. He needs to turn it a couple teeth clockwise. That’s about where the mark is located on the crank gear to line up with the mark on the block.
Agreed, most other videos show that bit. His doesn't, which might lead to false conclusions.
Thanks for the upload. Other videos won't go in and show those small marks. I was uncertain of what to look for.
I could not find this mark until I found your video. Excellent camera work!
La marca real esta en la parte trasera del piñon del cigueñal, es una esperie de ranura muy peqyeña, no es el cuñero como el señala
perfection my friend!
Thank you that's all I needed. Not a bunch of mumbo jumbo!
Man of few words, says a lot.
Help me alot great video thanks
Great video great idea
Thanks so much dude!
Super helpful! Thanks!
I saw this mark but to me it's like factory now I watch your video thanks 👏 mashallah
Amazing sir, you are amazing
Please don’t put the crank where he said in the vid. 1 tooth off.
Muy buen video lo felicito
Excellent thank you
Very helpful
Very helpful. Thanks
Gracias amigo
Thank you very much. Eccelent video
That works.... Thanks ELTALLVIS
Thank for help me.
спасибо👍👍👍👍
Im sorry Im not seeing the mark on the gear, nor on mine. I do see the mark above it on the block but thats all.
My struggle is real and I cant find any help around this issue
What type of camera did you use?
Einstein mechanic.
Talvez la cuña coincida pero, el piñon que se encuentra situado en ña punta del cigueñal posee como un disco en su parte trasera y en ese disco se encuentra exactamente la marca del PMS es una especie de ranurita.
De donde eres? Yo soy de Mexico y no te entiendo
Wow so i must be somekind of weird human because i understand this whole thing.
Is the crank's alignment mark the same as the 0 dwell mark on the pulley, ie, can they both be used interchangeably to set the crank's angle for the timing belt installation?
Todo es posible, solo que para reemplazar la banda del tiempo, debes remover el cover plastico y pierdes la referencia para el damper o polea, el cigueñal siempre sufre algunos movimientos el todo el proceso por ende lo correcto es guiarte por la marca que se encuentra en el sprat del cigueñal, algo mas, esa marca a la que te refieres es mas utilizable a la hora de tirar el distribuidor para que la chispa rompa en el punto exacto y para lograr eso, necesitas una especie de pistola que proyecta un rayo de luz y segun mueves el distribuidor con el rayo de luz logras ver exactamente cuando la chispa rompre en el PMS
Which year is the Camry?
That works
Oil leak strip teeth off my timing belt-fixing it now -Better fix seals/gasket too or your belt wont last for shit...thanks
I love you.
So you line up the key way on the crank with the dot on the oil pump?
Ryan Wilson that’s not correct, if you look there is a small v notch on gear. That lines up with the round mark in engine housing. On this video it shows the notch well before the mark on engine case
Richard Pedroza you line the slot on crank with the mark on engine housing then you have to check the alignment mark on the engine with the hole in the camshaft gear. If you cannot see mark through the hole in the camshaft gear then the engine must be rotated another revolution. It’s much easier to do if the timing belt is still on the car and the plastic crank cover is still on. Then you can align the mark on the harmonic balancer with the 0 marked on the plastic cover with the mark aligned through the camshaft gear. There are other videos on CZcams that do a much better job on timing belt installation. Hope this mess I typed helps
Richard Pedroza I will ad this is a non interference engine🎂, so if you screw it up you’ll just have to redo it. No damage done
Yeah I have to do the job all over again thanks to this guy😑😑 timing was like 10 advanced
OMG...a useless video with no narrative.