Thank you so much bro! Two years later and you’re still helping me a lot. All the tutorials I watched sucked and yours actually helps. Keep up the good work man God bless and happy new year 2022 🙏🏼
yo, I pretty much love that the kit includes everything we would need to install stuff + I love do it yourself's. Thanks for the video, really helpful.
@Shipohi Ollie you'll get wrinkles by worrying that much about stupid shit. Don't be a freak. Normal people isn't so obsessed about stuff like that. And also don't use retarded as an insult you incel.
@Shipohi Ollie I didn't try to mean anything offensive when I first commented just wanted to point out . Even the MEXCALI commented and didn't get toxic at me. No need to be toxic
You can buy new batteries with double the capacity for pretty cheap and the installation is super easy, so anybody that has the money to drop it on this mod can also drop a few bucks for a new battery
Would be really cool if you could change the four action buttons to their respectable colours, blue for X, pink for square, red/orange for cicle and green for triange.
2:48 there are no releases along the sides, this tool isn’t required, but it is if you’re new to this. 3:08 here he says that there’s “no going back” if you ruin the ribbon cable. You could buy a new ribbon cable from eBay or Amazon for like $1.50. 8:08 see the main board hanging off? This dude is royally fucking up the wires that lead to the rumble motors. Desolder the motors from the mainboard as soon as you see the rumble motors during this process. Use a flux dispenser and a soldering iron. No solder is needed. 12:13 if you have a charge board with a ribbon to the right, you’d typically get the same JDS to fix it if need be. This new board has the ribbon port on the left, let’s see if that’ll fuck up the mod. In conclusion, he folded the ribbon cable, and it didn’t fuck up the mod. That’s new. Before you close her up, use some flux and an iron, resolder the motors, use the solder on the board, unless you’ve pumped it off. In which case, instead, use lead-free rosin core solder to resolder.
You're wrong, there are two clamps/clasp on each side near r1 and l1. If you break them off completely you could get phantom inputs and the only way to fix it is tightening the screws as much as you can which can wear the threads on the plastic.
@@AlejandroGonzalez-vs7lq ...yeah, I found that out about 8 months ago, I didn't think to go back and fix this post. I no longer work on dualshocks or dualsenses anymore, the business model wasn't paying off like i'd hoped. Thanks for correcting this cause I forgot to.
@Hayden Campeau controller feels little bit warm (not too much) and battery consumption increases by 1.5x. Nothing to worry about, but be very careful when installing this. take your time and try not to break anything To be honest this product is awesome 😍
Ended up getting this kit and the lights work well but you have to put together carefully or you can mess it up. I also wouldn’t have metal buttons on the led lights because that shit will heat up.
It all started with “Fuctions”. (He forgot the n) Then It went strong with Cyan pronounced incorrectly. But the best part... the square and o button swap at the end. *slow clap*
Hes using plyers to take out buttons that he aint gonna use but the fragile cables that are important he uses his big hands so the cables 100% wont brake
Zero technical knowledge. “Plastic pieces” to everything he doesn’t know the name of. “This tool” - it has a name. Square and Circle incorrect. Loves saying the word “motherboard” This is why hobbyists should just stop making tutorial videos. - “make sure it fits” ... and if it doesn’t? What’s the work around? Please stop. Thanks. - this is coming from someone with a degree in Electrical and Electronic Engineering.
First off, Electrical Engineering and Electronic Engineering are the same thing. Second, you talk about how he doesn't use the correct name for the tool and then dont name it yourself. If your going to criticize someone and then claim to be a professional, at least be professional about it. He is just trying to show people something he thinks is cool and help them with the assembly.
i loved the video.thank you and keep up the good work so on that note im gonna get me that and do it myself.i have no complaints at all on your clip.thank you again and stay safe
That shit dope n honestly if I was to do it I would mix the button up on purpose...been playing PlayStation since it first ever dropped not like imma forget the button pattern...
I love your content. I'm new to the channel and I'm honestly super interested. I would love to be able to make this controller. Super cool and keep it up. Hopefully, these 10k subs turn into 100k.
Anyone notice that he mixed up square and circle
Yeah... 😅
He even mentions at the beginning to pay close attention not to mix them up haha
Zach Gauthier 🤣😅
Yea
Ye
Love the fact that comments are throwing rocks at him, and he's just laughing!
That's being a CZcamsr...
Thank you very much my friend! 😉 Can’t let things get to me. Gatta have fun and laughs at things 😃👍🏽
He isn't laughing every single one is hurting his kitty!!
who else watched the whole thing even tho they wasn't going to do this to their controller
Why thank you 😃👍🏽
iuh i might actually do it
Me
Me
Same😂
Hey guys, thank you for all the support & feedback. You can find the LED mod kit for around $22 on the ExtremeRate website❗️ hope this helps 😃👍🏽
MEXZCALI why is it that it only works on gen 2 controllers?
Can seem to find them anymore. Tried to search for v1 led kit as well and v2. Only ebay has them now which I dont trust that site.
Who else thinks this looks easy but know they will mess up😂😂
me
mail me your controller and the kit and i’ll do it for u
Chance Boykin your high
hi mike
It's easy the r2 and l2 is the the hardest cuz the spring everything else is easy
"make sure you remember what way your buttons go in"
* Mixes up square and circle*
James Quinn 🤣
You put circle and square backwards. No true PlayStation fan would ever make that mistake 😂
Michael Casanova if you checked the comments you would know that so many people have already made that discovery
Michael Casanova lmaoo i said the samething 😂 thats the main thing that bothered me!!
69 likes
I like how the guy wasted 30 seconds saying which way those buttons go and he still got it wrong xd
🙌🙌yes brother🤣🤣🤣
Him : be gentle with it
Also him : -pulls the living hell out of it-
🤣👍🏽
Kvngraph gaming I saw that he also almost started pulling it while it was twisted right where he needed to pull
iiiiiiii
Lol
Thank you so much bro! Two years later and you’re still helping me a lot. All the tutorials I watched sucked and yours actually helps. Keep up the good work man God bless and happy new year 2022 🙏🏼
yo, I pretty much love that the kit includes everything we would need to install stuff + I love do it yourself's. Thanks for the video, really helpful.
If youre a real og of the ps you will catch the mistake of the button patterns the circle and square and on the opposite 😅
And I agree 😅 not an OG yet I guess lol
Honestly
I saw that and i thought i was tripping
Ye
THATS WHAT I WAS SAYING 🤔🤔
I was scared to look at the comments after the whole circle incident
this man doesnt even know the button positions of a ps4 controller and making tutorials. youtube is a wild place
aydnn atkn Right!! I’m saying the same thing 😂👍🏽
Fr
Why you so bitter ?
@Shipohi Ollie you'll get wrinkles by worrying that much about stupid shit. Don't be a freak. Normal people isn't so obsessed about stuff like that. And also don't use retarded as an insult you incel.
@Shipohi Ollie I didn't try to mean anything offensive when I first commented just wanted to point out . Even the MEXCALI commented and didn't get toxic at me. No need to be toxic
just a side note, I used the ps button instead of the circular start button not sure that it would light up, but it does. hope this helps
I keep the original PS button in all controllers I mod. I think it looks much better.
Title should be changed to:
"How to nuke your ps4 controller battery"
you can get a battery with a higher capacity
They actually don’t use a lot of power leds use less power than any other light source
You can buy new batteries with double the capacity for pretty cheap and the installation is super easy, so anybody that has the money to drop it on this mod can also drop a few bucks for a new battery
Instructions unclear accidentally blew up my house
paddy Cosgrove I guess it got real LIT 🔥 🤣
paddy Cosgrove 🤣
My man really wants to make his battery go dry every 10 minutes
😂😂
You can buy better battery
Westland *bigger
@@redha8867 it can be same size
@@westland4759 I guess you dont understan what he meant
16:15 best explanation of colorless
Na na, it's "Calaless"
Man: bulids an LED Kit into his controller.
The already weak Batttery: Am I a Joke to you?
It's not weak
@@krasserj4k actually, some batteries are weak
The ps4 controller batteries are amazing
And leds don't use much power
@@krasserj4k tell that to my controller.
This would look so good on the 'Clear' controller!
Gonna order me a kit for mine!!
16:57 replace 0 -> [] square and circle
Would be really cool if you could change the four action buttons to their respectable colours, blue for X, pink for square, red/orange for cicle and green for triange.
I completely agree with you 😃👍🏽
him: "you take it and shove it up in there
me: "that's what she said"
Overused.
@@sploofy4878 But funny. 😂
Just got one of these, good to see this video. I live in the USA and can't wait to install it. Thank you for the help with this video.
After taking the DS2 and DS3 apart so many times, this looks easy as hell! Lol
Here from Brazil staying in home because COVID-2019 and searching for random videos on youtube
peru here
Watch this if you are bored,
czcams.com/play/PL2yQqETkshLFdyFe-m00GOLmcdPhrLwHk.html
👍🤟🇪🇸
Instalation 1:10 fuctions 15:10. Review 17:40 giveaway 20:40
GIVEAWAY AT 100 LIKES!! 😃👍🏽
So uhh never gonna do the giveaway ?
Alex Gargoza lol
For any 'true' PS fan, seeing the circle and square buttons switched is an atrocity.....😆
@@WayneClark their leaders are to blame not me or you.....UNLESS YOU started some something somewhere......hmmmm🤔🤔🤔?
@@WayneClark Chill dude it was joke...
@@WayneClark boo hoo not my problem
2:48 there are no releases along the sides, this tool isn’t required, but it is if you’re new to this.
3:08 here he says that there’s “no going back” if you ruin the ribbon cable. You could buy a new ribbon cable from eBay or Amazon for like $1.50.
8:08 see the main board hanging off? This dude is royally fucking up the wires that lead to the rumble motors. Desolder the motors from the mainboard as soon as you see the rumble motors during this process. Use a flux dispenser and a soldering iron. No solder is needed.
12:13 if you have a charge board with a ribbon to the right, you’d typically get the same JDS to fix it if need be. This new board has the ribbon port on the left, let’s see if that’ll fuck up the mod.
In conclusion, he folded the ribbon cable, and it didn’t fuck up the mod. That’s new. Before you close her up, use some flux and an iron, resolder the motors, use the solder on the board, unless you’ve pumped it off. In which case, instead, use lead-free rosin core solder to resolder.
There you go
You're wrong, there are two clamps/clasp on each side near r1 and l1. If you break them off completely you could get phantom inputs and the only way to fix it is tightening the screws as much as you can which can wear the threads on the plastic.
@@AlejandroGonzalez-vs7lq ...yeah, I found that out about 8 months ago, I didn't think to go back and fix this post. I no longer work on dualshocks or dualsenses anymore, the business model wasn't paying off like i'd hoped. Thanks for correcting this cause I forgot to.
MEXZCALI : DO NOT MESS UP THE BUTTONS!!
ALSO
MEXZCALI : MESSES UP THE BUTTONS
ME : 🤣🤣🤣🤣
The Urban Synapse Yeah.... about that 😅🤣
Great video I've just subscribed to your channel. Does it drain your battery down faster having the LED mod kit on??
Take a shot every time he says “here comes the fun part”
Here comes the fun part, I'd be dang drunk in no time haha
After I installed this led mod
Me: this is looking soo good 😍
Controller battery: dude I don't feel soo good 😵
@Hayden Campeau controller feels little bit warm (not too much) and battery consumption increases by 1.5x. Nothing to worry about, but be very careful when installing this. take your time and try not to break anything
To be honest this product is awesome 😍
I did it, it just work so good on my red ps4 controller and it also looks amazing.
Thank you😍
Can someone else remake this video and put the buttons in the right places😂
I like you're attitude! Positivity man, that's needed right now.
the square and the circleeeeeeee
U taught me how to open a controller thx dude it came in handy because I really want to install a led kit
Muhammad Hussain You’re very welcome, I’m glad I could be of help! Tip don’t mess up the buttons lol 😂👍🏽
Thanks for the video! O and Sqr being swapped was triggering but the video was amazing!
just wiggle it gently out.
also him: *proceeds to use the power of God and anime
this is what my controller looks like after the Weekend League in FIFA
I’m from Phoenix, Arizona and would love to win this!
If I do win thanks so much!
MEXZCALI "make sure you remember where the buttons go."
Also MEXZCALI: Messes up square and circle
My kit is coming today and cannot wait to put it on my controller.
89% of comment about how he screwed the pattern of the button and how a baby could do it
10% praising him
1% my comment
Theres 1k comments rn so urs is like .1%
@@lolman5997 im so dessapointed by myself
@@apophisca2163 so that means that only 100 people commented since you count only yourself as 1%
This video sounds so wrong put it in there,Put it in slow, wiggle it a little bit, take it out slow, stick it in😂
😂👌🏽 Now that you mention that, it really does! 😂 lol
Bruh.... this hurts my eyes.... u mixed up O and [] after u said "dont mix it up" pls fix it and add it to the video
also, he called cyan "cayenne"...
@@fubumaruda2128 Did he say cyan?
@@wandren912 16:09
@@fubumaruda2128 he also misspell installation and function...
You can't add stuff to videos xD
5:43 such a smart guy, first says to put the buttons correctly, but doesn't realize that the controller is turned upside down
Hello from Northern Ireland followed this to a tea (well except the square and circle buttons lol) and working perfectly thank u so much.
He after every minute: here comes the fun part
i even dim the light of my controller just to save some juice and this dude puts a tons of led lights ok boomer
Dude said to save some juice
imagine installing this with their diy back buttons
I live outside of the US, in Portugal and his accent is really weird to me. But I love his channel even though I have to use subtitles sometimes
Ended up getting this kit and the lights work well but you have to put together carefully or you can mess it up. I also wouldn’t have metal buttons on the led lights because that shit will heat up.
Texas and that's a cool freaking troller
Uhhhhhhhhhhhhhhh why is o on the left it’s supposed to be on the right
Damn tall attacking this man for a simple mistake
Tall
Simple mistake?😂😂😂
Im attacking him because he promoting scammers
I would love to have a blue led for X, pink for square, red for circle and green for triangle that would have been killer !
Another question do you any information if there going to make some for the x box series x controller.
Yes, they have said it'll be coming out this spring 😃👍🏽
5:44 You say what to do and you do the mistake xD
14:43
when your wife's boyfriend gets you a lego star wars kit for christmas
What u got going on
A glowing controller would annoy me in the dark.... Sometimes i even wish i could turn off the light bar
I think you can in the devices settings
lol i instantly knew when he mixed up the square and circle bc im a ps4 fan🤣🤣
Awesome. I'm getting old and half blind, this helped a lot.
It all started with “Fuctions”. (He forgot the n) Then It went strong with Cyan pronounced incorrectly. But the best part... the square and o button swap at the end. *slow clap*
Cayenne is pretty much a color now :'v
@@jolugar258 Red! here comes an spicier color! ;)
...should probably tell people doing this voids the controller warranty...
People should know already that opening any device voids warranty. No need to mention that dude
Who cares? You can find brand new controllers for $20 so f a warranty
@@EdVel Actually taking apart electronics does not void your warranty.
$40 for a new controller if he messes something up, so what? It's not a $1,000 phone.
@@justspaztik it's the PlayStation we're talking about...
Hes using plyers to take out buttons that he aint gonna use but the fragile cables that are important he uses his big hands so the cables 100% wont brake
I live Stockton California I just described to your video I look at some of them are pretty cool just like you
How would it look on a see through controller though
For everyone trying to do this don’t waste of time
King Primo509 why it looks neat and I’m planning to buy it
Zero technical knowledge.
“Plastic pieces” to everything he doesn’t know the name of.
“This tool” - it has a name.
Square and Circle incorrect.
Loves saying the word “motherboard”
This is why hobbyists should just stop making tutorial videos. - “make sure it fits” ... and if it doesn’t? What’s the work around?
Please stop. Thanks.
- this is coming from someone with a degree in Electrical and Electronic Engineering.
Raj Sohal did I ask or did anyone ask 😂😭🥱
First off, Electrical Engineering and Electronic Engineering are the same thing. Second, you talk about how he doesn't use the correct name for the tool and then dont name it yourself. If your going to criticize someone and then claim to be a professional, at least be professional about it. He is just trying to show people something he thinks is cool and help them with the assembly.
I’m from România 🇷🇴 and i eat “sarmale cu mămăliga” 🍽
I know I'm late to this video but I watched this even though I might not do this but I'm thinking about getting a kit in around a month
i dont even have a ps4 controller but still watched the full vid
Latitude: 66.42800, Longitude: -90.36292, Distortion: 6.25
i loved the video.thank you and keep up the good work so on that note im gonna get me that and do it myself.i have no complaints at all on your clip.thank you again and stay safe
This is what I call BATTERY KILLER
Don’t worry about the mixup, it’s easy to fix them back! Sick controller mod though :P
Animimo Thank you very much for the support my friend! 🤟🏽😃
Dude i started taking fully apart controllers and this is the challenge that gives a thrill lol i wanna do this new tech
As long as battery power is not badly effected im getting it
yeah.. i don't like LED on the analog sticks as well. but overall it looks good
I dont have a ps4 and i still watch it
Looks awesome, only thing I wish you didn't have to change was the PS Logo
You know its good when square and circle are backwards
The square is supposed to be on the left and the circle on the right
That shit dope n honestly if I was to do it I would mix the button up on purpose...been playing PlayStation since it first ever dropped not like imma forget the button pattern...
If i dont win im buying this plus the video is great i wouldnt buy it without a vid. I hate the instructions that comes with modding things
All that hard work!!! This video deserves a like lol
Looks very nice, but does it drain battery faster.
I’m from NZ but I live in Australia
Im from Croatia and i'd love that kit
That's cool that came out something like that I'm from New Hampshire
Cyan isn't a hard "K", its a soft "S", like Cyclopes, cycle, cymbal and cyborg.. "Sai-An" not "Kai-an"
I love customizing controllers and the Led mod kit is one of the things I will be getting
He said here comes the fun part like 1000000 times
Gaming With pxrvez Very true and that’s because I have fun doing what I do 😃👍🏽
I wish i had 1 of those
Keep it up tho
Gaming With pxrvez Thank you! Will do 😉👍🏽
I love your content. I'm new to the channel and I'm honestly super interested. I would love to be able to make this controller. Super cool and keep it up. Hopefully, these 10k subs turn into 100k.
i broke too many controllers...and now i know every part of a controller...kinda proud tbh😂
after watch this, the question is, can you count how many he said "this is fun part"
I like the brightness