How To Make The Nexus Pro X Shoot 300fps!
Vložit
- čas přidán 2. 08. 2024
- In this video I show you how I modded the Nexus Pro X to shoot 300fps. Out of the box it usually shoots just below 200.
Includes mod overview, chrono test, range test and accuracy test!
Nexus Pro X (USA): www.walmart.com/ip/Adventure-...
Nexus Pro X (AUS): www.oztoystore.com.au/product...
Nexus Pro X Upgrade Spring (USA): dartzoneblasters.com/product/...
Barrel Collet (USA): outofdarts.com/products/nexus...
Frontline Foam (USA): www.frontlinefoam.com/?sld=8
Worker Heavy Darts (USA): www.frontlinefoam.com/product...
Worker Darts (AUS): www.foamwork.com.au/product/w...
Worker Heavy Darts (USA): outofdarts.com/products/worke...
0:00 Intro
0:42 Mod Overview
2:32 Chrono Test
5:42 Range Test
6:49 Accuracy Test
10:58 Conclusion - Zábava
Nexus Pro X (USA): www.walmart.com/ip/Adventure-Force-Tactical-Strike-Nexus-Pro-X-Manual-Ultimate-Dart-Blaster-with-24-Half-Length-Darts-Flies-up-to-200-ft/5101859033
Nexus Pro X (AUS): www.oztoystore.com.au/products/dart-zone-adventure-force-nexus-pro-x
Nexus Pro X Upgrade Spring (USA): dartzoneblasters.com/product/nexus-pro-x-high-low-powered-spring-set/
Barrel Collet (USA): outofdarts.com/products/nexus-pro-x-barrel-collet?ref=RIa3bVI3vXYhUs
Frontline Foam (USA): www.frontlinefoam.com/?sld=8
Worker Heavy Darts (USA): www.frontlinefoam.com/product/worker-gen3-darts-high-end-heavyweight-1-2g-box-of-200/?sld=8
Worker Darts (AUS): www.foamwork.com.au/product/worker-gen-2-he-foam-dart/1
Worker Heavy Darts (USA): outofdarts.com/products/worker-short-darts-200-pack-he-heavyweight-1-2g?_pos=2&_sid=4ce374717&_ss=r&ref=RIa3bVI3vXYhUs
Got myself a Worker Harrier for a 300fps event in Denmark next month. And got a BK1S on the way. Bought them after seeing your reviews, keep up the good work! You are very much appreciated!😁👍
Foam Nomads!
If you want it to last shooting 300 fps you are going to want the sabre priming block, plunger & catch. using a 1.8x350 Swift spring
@@paullassahn4641 ok, I got the sabre parts. I don't have the spring yet. Thanks for the advice!
@@paullassahn4641where would you get that 1.8? I got mine off amazon from jcgworker and it's made of very poor quality materials.
@@paullassahn4641 you don’t need the sabre priming block and if you use the sabre plunger rod and catch make sure to grease the catch a little or the metal on metal will eat the catch even though it is metal. It will do 300 FPS on the 1.6 x 300mm if you just get a tighter barrel.
"I'm going to be ignoring the downgrade spring entirely." Good man.
The quality of these videos are awesome. Im really enjoying them. 😊
Wow. Great video. I can't believe how easy it is to get a Nexus Pro X to 300 FPS. Have you heard of the Siren Mauler, apparently it can go up to 270FPS out of the box. No modding necessary.
great video! Lots of good detail and explanation matched by results, and I especially appreciate the 'survey' of other players at the end. Well done, sir!
Very nice video Bradley 👍
Good upgrade and not bad groups mate
It is even more impressive that you can prime this thing over and over again for the chrono, accuracy, and range test.
It becomes a workout when you do it repeatedly
A cool blaster for only 50 american clams is really nice.
Would be cool to see you do a video on the dzp mk-4
I considered it trash when it came out and that hasn't changed. Who makes a barrel extension that you can't add rifling to? Lmao
@@BradleyPhillipsYTfinally someone who doesn’t endlessly suck DZ off lmao
(Drac)
I had a feeling this would be the result, considering the tube size and length. I'm still really impressed with the stock performance. I think the only thing that comes close under $100 USD is the Trion, and it's 60% more expensive and needs spacers to hit 200 FPS. For a $50 Walmart blaster I'm still amazed. I will also say that mine does have a perfect seal, which surprised me.
I feel like this is the blaster that will really change the way kids view "nerf guns". The original Nexus Pro still felt really clunky, trying to still use full length darts.
What you can buy on store shelves is definitely improving and as a result, kids will experience hobby level Nerf as they grow up. The inclusion of a BCAR was a brilliant decision.
Have you considered getting a luggage scale or something similar to actually measure the prime weight? Could be an interesting data point to compare between blasters.
I have a fish weighing scale I've used before but could be awkward with heavier primes like this
What size barrel did you use? I want to go to home depot and get a copper pipe and use it as a barrel.
Waiting for the silentknight footage tho.
I wonder if the international shipping caused issues with your seal. Mine will not gap with my finger plugging the barrel.
Thanks for proving what you suspected ended up true. I have a second Longshot Pro for $35 to try out a 300 FPS upgrade so not for me - love my stock NxP so much easier than original - why undo that easy prime when you can tag so accurately all day with stock easy prime.
Could you do a 300fps guide on the worker seagull? I'd really appreciate it!
step 1: buy a harrier
He already has a mod video. The gull isn't made for 300fps. As the guy above me says, buy a harrier for 300 fps
@@johnmurcott1273 I'd have to check for myself, but I'm pretty sure that the npx doesn't have any more pt capacity than the seagull does. It may be difficult but i think it's definitely possible to make a seagull hit at least close to 300. Reason i asked for the seagull is because i simply don't want a blaster as long as the harrier.
@@Kannolias the consistency drops like a stone after about 250fps.
Are you gonna review any of those Black Raisins super expensive AEBs? Even though for Australia they might look a little to realistic...
You mean the Storm? Already reviewed it
Well, the blizzard is the same thing, but I'd love to see you review the Skybreaker; blackraisins.com/en-ch/collections/g-o-s-games-of-softdart/products/ln02-skybreaker
curious if the roller on the stock AFG would help with that prime at all. i'm keeping mine stock aside from maybe some cosmetic mods, but being that DZ sort of intends that spring with those spacers to be used on an otherwise stock blaster, i kinda wanna know what just the spring and spacers do, without the additional barrel and better seal, and the vertical grip. it's likely a total catastrophe, but it might be fun to watch the crash.
The stock blaster with upgrade spring caps out around 250-270 fps I believe
Also the included foregrip is just bad, the roller won't improve that cheap quality
Somebody's gonna make a bigger metal plunger tube after watching this 💯!
such a great blaster evern without the upgraded spring. the spacer(s) x spring make the blaster feel sloppy. its one or the other for me.
Did your fore grip fit correctly? I feel like my picatinny didn’t fit right
Yes it fit fine, might be grip depending
have you ever tested rifling on nerf darts similar to first strike paintball rounds along with fully rifled barrels
I have tried rifled darts but the creation of them was too inconsistent
@@BradleyPhillipsYT what about fully rifled barrels? i think air gun rifled barrels may be useable. i know that Tiberius arms was going to make a rifled 50cal barrel for 50 cal fsr round for their flagship revolver but they never did
@@tntchickenwingtnt8598too much drag
What does just the longer barel with no air leaks with the stock spring do to the performance?
Probably not much, the stronger spring matches well with the longer barrel, stock spring would need somewhere in between
Just out of curiosity, how much performance upgrade do you think you get by just fixing the air seal?
Not much, but it all adds up. Maybe 10fps?
@@BradleyPhillipsYT I literally only play with my kids...well, 15, 13, and 11... So more teens now? And hockey teammates Lol. I'm in Pennsylvania and everything competitive around here is airsoft or personal. I basically have a bunch of Nexus as a base, but am probably upgrading to more of these.
That said, I didn't need anything hitting 300fps. But, getting the most out of the base Nexus pro X would be nice. Appreciate it.
What made you come to the 35cm barrel? It seemed very consistent with that length.
So, like a month ago I calculated the air volume and I think I went with a 1.6 or 1.7 ratio
@@BradleyPhillipsYTso would you consider this peak barrel length, even with a stock spring? considering getting an npx and just sticking a 9$ kuryaka barrel on it with the stock spring and bcar
Stock spring you'll probably want a little shorter. Maybe 30cm or so.
@@BradleyPhillipsYT makes sense yeah. thanks!
Hey I Have A Question How Do I Remove Slam Fire So I Can De-Prime The Blaster
I don't think you can due to how the firing train works
Why do you capitalize the first letter of each word, yet completely avoid all punctuation? 🤔
@@BradleyPhillipsYT Alright Thanks For Letting Me Know I Appreciate It
@@totophi I’m A Kid I Think I Looks Good It’s Just Personal Preference I Guess
I’m actually cooking up a completely different solution to get it up to 300 fps without a barrel collet. But I like the transparency on how bad the prime is 😂
I mean, you could tap the stock muzzle for a grub screw or something, interested to see what you come up with.
@@BradleyPhillipsYT I did the grub screw for my super spamf build but this time I’m trying something new! I’ll let you know if it works or if my NPX blows up in the process 😂
@@kingofgames234 if it blows up ... The video is still needed lol.
Any idea what the upgrade springload is in kg?
At full compression, around 50kg I believe
Notably the spring is no where near full compression even with both spacers.
Jesus that’s heavy.
With this what are the hobby grade blaster brands doing? 😂
Can you please tell us where is your scope from 😭😭😭😭
It's a Holosun HS506
What scope are you using in the video? Can you provide me a link?
It's a Holosun HS506
i wonder how long this will last
in terms of long term durability
Quite likely not forever 🤣
@@BradleyPhillipsYT yeah, i wonder if sabre is gonna come out with anything for this, also how long in advanced are your videos filmed
@@frogsbutfrogs the pinned comment can usually give you an idea of that
@@BradleyPhillipsYT yeah also, is sabre putting on another operation silent night style event
I don't think this would last long. The catch or priming block would probably break in a day. I was surprised how hard the prime is with the heavy spring DZ sells but I suppose they' might sell more blasters when they break innevitably
Good for business if they break, though I haven't seen it happen yet
I know you’re exclusive to springers, but how about the sabre flywheeler that looks like a kriss vector?
Soon says Conrad who is sitting next to me
My xshot long shot can hit 300 fps, but only with cut down elites, and without a bcar. The prime is so hard i can't prime it with 1 hand.
This has a heavier prime than my 300fps Xshot Longshot for sure
@@BradleyPhillipsYT that's incredible. Which has a bigger plunger tube? Do you think either could hit 350?
@@DEVILISHLY_DELICIOUS I think XLS has larger
@@BradleyPhillipsYT thanks.
You know the muzzle piece comes out without opening the body right?
Yes but I also needed to glue the barrel in
@@BradleyPhillipsYT Needed is a strong word. I did notice not all Kury barrels are exactly the same O.D. However, I did get a great seal with one but the sick purple one I needed a little teflon tape. Thanks for the awesome content bro!
@@scottblack2760 no, what I mean is without a 3D printed barrel collet, what would hold the barrel in? Needed to use glue in this scenario.
@@BradleyPhillipsYT I hear you. I jammed a couple cheap o rings in it. Not ideal for sure but the X Fox muzzle is just a fancy version of stuffing an o ring in there.
Pretty cool, but it still looks like a frog with its tongue out to me
A great description
Pils 400 fps
What does pils mean?
Not happening with the Nexus Pro X
Why
The Nexus is a very poor design. it is very difficult to pull up, its mechanics are too complicated and this has not changed in Nexus 2.0 either. and on top of that it's LGBT color.... i think it's a mistake
what... is wrong with lgbtq
@@user-vl8ft3jp6t nothing wrong with LGBT.
@@user-vl8ft3jp6tat least everything after the b, but in general all of it