Replace Glow Plug step by step
Vložit
- čas přidán 20. 08. 2024
- Easy step-by-step video guide on how to replace the glow plug & atomiser in the Diesel Heater.
OTHER DIESEL HEATER VIDEOS IN THE SERIES:
• 6-Fan Blade Icon Controller- Step by Step • Chinese Diesel Heater-...
• 2-Fan Blade (or NO fan blade) Icon Controller- Step by Step • 2-Fan Blade (or NO fan...
• Heater Rotary Controller Step by Step • 05 Heater Rotary Contr...
• Pairing one, two or more remotes to the LCD Controller • Pairing remotes to the...
• Turn on your Heater by Text • Turn on your Heater by...
• Diesel vs Kerosene & Heating Oil- with links to external evidence • Diesel vs Kerosene & H...
• Replacing the Temperature Sensor • Replacing the Temperat...
• Replacing the Glow Plug • Replace Glow Plug step...
• Swapping out the Motherboard (ECU) • Swapping out the Mothe...
• Diesel Heater Current Draw • Diesel Heater Current ...
• Thermostatic / Manual mode swap • Thermostatic / Manual...
• Battery too low for heater... seems not! • Battery too low for he...
• New 'Upgraded' CDH Exhaust Muffler • New 'Upgraded' CDH Exh...
• Adjusting the Fuel Map Settings • Adjusting the Fuel Map...
• Optimising the fuel mix in the CD Heater without a GA? • Optimising the fuel mi...
GOT A CAMPERVAN? You might be interested in my van hacks channel for mods, tweaks and upgrades. www.vanhacks.info / @campervan_hackers
#chinesedieselheater #DieselHeater #cdh chinesedieselheater, #CampervanHacks #campervanConversion #Campervan #Conversion #selfbuildCampervan, #campervanConversion #VanHacks #DIYcampervan
Diesel Heater, cdh, Chinese Diesel Heater
Great video, may need a mention to make sure to clean the air bleed hole especially if the heater has been in use for some time or the user has encountered white smoke being produced. 👍
Yes, that is a good point and in fact, I've had a message asking if I have a strip-down and clean video for the whole machine and that would be a good place to talk about that. However, I don't and don't have the need to do a strip down and clean... but... my friend's van heater is looking pretty smokey at the moment so no doubt I'm going to get roped in on that one so I'll do a vid then and I will be sure to include the atomiser chamber. Many thanks for your comment.👍
@@campervan_hackers thank you for getting back to me. Your video is certainly helpful, very clear and concise. It certainly gives confidence to those who otherwise wouldn't attempt it or those that tackle such jobs heavy handed, a bit like a bull in a China shop and break everything. 👍
@@stevew9957 where is the air bleed hole, my heater just dumps white smoke.
@@TakonaBear with the gauze removed, if you look into the hole you will see the air bleed hole. It's mentioned in the video. I use a piece of stiff piano wire bent at 90 degrees to clear any debris from the hole before replacing the gauze.
Very Clear thanks for the help friend!
Glad it helped 👍
how do you know when to change the glow plug though? I have an espar and you need a special tool to disconnect the wires to change it.
Hi... on the CDHs, the wires are simply unplugged form the ECU .. there is a 2 pin connector. However, although none of my heaters are Ebers.... I thought they was similar except they have a waterproof inline plug that you can simply connect without special tools. This link for a Espar glow plug implied that? www.ebay.co.uk/itm/386852784440?_ul=GB
What size is the spanner thank you
12mm box... you can get the slotted box spanner cheap as chips on eBay but also easy to make if you have a spare...
@campervan_hackers yeah thanks for the reply I will make one just didn't want to cut the wrong one🙄👍