【Explanation】Bluetooth knob switch function and use operation summary
Vložit
- čas přidán 11. 09. 2024
- This video illustrates the function of the Bluetooth rotary switch and its operation.
Follow us to receive more information:
Official website: hcalory.com/
Facebook: www.facebook.c...
Facebook group:www.facebook.c...
VKontakte: id70428...
Instagram:www.instagram....
#dieselairheater #dieselairheaterreviews #dieselheater #heater #bluetooth
So fast that its lost its objective, more frustrating than helpfull
You can slow down the video
Your feedback is valuable and we appreciate your honesty.
Very informative but too fast. Do yourself a favor: click the SETTINGs Gear icon and change the playback speed to something slower.
Thanks for the controller video, it helped a lot!
So glad that it works!! ❤❤
How do you change the altitude? I found it in settings but am not able to do anything with it
Could you tell me what is F5:Temperature compensation for please? What does it do? When would I use it?
Could you explain the F7:Oil pump power setting please? Does this change the volume being pumped, or is it a selection made to select which pump you have connected to the heater?
What is En07:Pump oil enable?
Thank you
It alters the in built temperature room sensor so for example it's showing your room is 23 degrees but you got a proper thermo that shows it's really 21 then you set it to -2 then it will be allegedly correct.
F,7 is to show what pump you have connected to the heater
How do you change Celsius to Fahrenheit
Yes how the hell is this not in the settings????
because Celsius is the world standard 😅
Welcome in the 21th century, we use C°
I also want freedom units of measurement 🇺🇸
@@BB.0101 and ponds & yards 😆
Hi can you explain the timer function please so the first digit is the time it will start and the second how long for?? And you turn the timer on , on f3?
Is there a plug and play extension for the Bluetooth rotary controller? I know others have modified theirs. Just curious if I can get the controller out of the snow without any soldering and crimping.
I simply bought some 3 core .50mm cable, cut the cable and added about 3 MTRS to bring it inside my caravan , very easy to do took me 20 mjnutes , but I'm sure there's one out the somewhere .
How do you adjust the altitude setting?
Highland mode operation
Press and hold "*" + "ok" keys at the same time for 2s to enter plateau mode, and the icon "mountain peak" will show to start plateau mode.
In the plateau mode, the wind and oil ratio is reduced to adapt to the lack of oxygen in the plateau, and then press and hold "*" + "ok" key for 2s to exit the plateau mode.
Hope this can solve your problem, if your problem can't be solved, please seek help from professional customer service: 👇Service Guide
👇Service Guide
👉If you need product information and after-sales service, please send an email for professional customer service help! customer support: hcalory@ hcalory.com
@@hcaloryofficial There is no "*" and there is no "OK" on this model. Please give us the correct instructions.
@@BassistInATutudid you figure out how to change to Alpine mode with this controller? Like you said have no idea what they are talking about with “.” and Ok button.
@@Mrv1960 There is no alpine mode. No altitude mode no other setting available.
Engineering mode En06 setting is for altitude, but there is no way to change this. The logical way would be pressing the wheel like when entering the correct time in the basic settings (F0). But En06 just stays at sea level, unable to change it
Hello, I did not see it in this video. Can these systems be run on a 24v system like many other diesel heaters?
Hi, can you confirm if the other diesel heaters are from Hcalory, as they are typically sold as a set? And please email us hcalory@hcalory.com for more details
@@hcaloryofficial the “other diesel heaters” I am referring to are not Hcalory. These are ones I have installed previously on other projects using the “blue style” controller which has a 12v or 24v setting.
I purchased the model in this video most recently for my latest project and I plan to use a 24 volt system. Can I use 24v on this model or will I need a voltage reducer.
Hello, is there an automatic operation feature at the set time?
There is no F9 setting on my controller How do I set the auto start stop on this cintroller.? if I press F8 and set the setting to run on there is no indicator on the controller showing that auto start stop is on can you please help me as I bought this heater just because of that feature
Can I use this controller in place of standart chinese diesel heater controller? Do I need to replace mother board?
yep, swap board, re-pin and it works
How do i get advanced settings to adjust max and lowest fan and pump speeds. ?
No such place in these I’ve heard of. They used the term “smart” a little loosely in this case.
@@TheMajictechPity its not there like the standard Chinese heaters have with code 1688. These 2kw heaters are set to 1.5hz and about 2300rpm lowest setting from factory . They can be manually tuned lower once running and up to temp then turned tuned down while running to run clean and hot at 0.8hz 1700-1800rpm more suited to background heating and using much less fuel they just struggle to start up at the lower setting so turn setting back up to factory for starting. 👍
How to clear remote control pairing? The unit now keeps turning off on its own, temp +- like a ghost
Do I have to change the time each time I turn on the device?
Mine does not hold the correct time it is useless at doing that.
Thereis no F9 on my controller how do i set it to stop start at the correct temperature . I have the exact same controller !
It’s actually on f8 now. These guys don’t give a damn until their sales plummet. Nothing on this heater works as it should. Hcalory has the same garbage controllers now. They suck. . . . They won’t even throttle up enough to properly warm a small space.
So to me, these things don’t throttle up enough in temperature mode. The space I heat is well insulated but when it’s really cold the damned thing never gets to the temperature I want, (a comfortable temperature) it’s always about 4-6 degrees colder due to not running fast enough. So with that said, the only cure is to turn it about 5-6 degrees higher than your desired temp, so it will speed up enough, this totally negates the auto shut down and restart function when I’ve gone to work and the sun comes up. My poor doggies hate this heater as well as I. Smart setting 😅more like idiotic setting. . . . .
Yep smart setting does not work it sucks, I use mine in level mode only, to be honest it works excellent heating a static caravan with a room size of 3.6 X 6 MTRS
I agree, its awful.
Even the dirt cheap other makes do it properly.
How do you adjust altitude - question was asked 2 months ago and I could use the answer you gave BUT YOU DIDNT GIVE ONE!
Highland mode operation
Press and hold "*" + "ok" keys at the same time for 2s to enter plateau mode, and the icon "mountain peak" will show to start plateau mode.
In the plateau mode, the wind and oil ratio is reduced to adapt to the lack of oxygen in the plateau, and then press and hold "*" + "ok" key for 2s to exit the plateau mode.
Hope this can solve your problem, if your problem can't be solved, please seek help from professional customer service: 👇Service Guide
👇Service Guide
👉If you need product information and after-sales service, please send an email for professional customer service help! customer support: hcalory@ hcalory.com
This didn't work for me, shows 11 ble Instead
F9 is missing from my menu
Not working at all on Android 😡
Give it a try again now with the updated app. I had the same issue in the Galaxy S23 but recently retested the app and its working now for bluetooth features.
How do I get advanced settings to adjust max and lowest fan and pump speeds. ?
You can't!