'67 Evinrude 18hp Marketplace find, Various repairs.
Vložit
- čas přidán 11. 03. 2024
- Another good outcome for a $100 Marketplace motor. Items found to be broken/ defective were the Magneto cam and flywheel, the points and condensers, spark plug wires, and the carburetor needed to be rebuilt. The last guy to work on it had over-torqued the flywheel so tight that it snapped the Magneto cam and destroyed the points. The flywheel is junk because the keyway was whopped out. I installed a new top crank seal, new plug wires, points and condensers, rebuilt the carburetor, drained and refilled the lower unit. Impeller is original in the test but I've got a new one and hope to change that this week too. Thanks for tunin' in!
Nice little engine! I have a 15 hp. I love some of the older ones. Dad raced Mercurys, and I had a few but love the way Evinrude and johnson's run
Couldn't agree more!
Comment on a particular outboard motor you'd like me to feature, and I'll try to surprise you!
Get some Sta- Bil Fogging Oil and give the low cylinder a liberal blast. Rotate the crankshaft a few times and then let it sit for 24 hours. Repeat as needed while checking for any gains. If you can get it to run at all the heat helps too. Hopefully you just have a stuck ring
Nice motor
Yes, thanks! I have a '67, a '68, a '59 ,a '57 and a '66
Thanks! In total I have a '57, a '59, a '66, a '67 and a '68 all together ❤️
If wasn't attached to boat, you could have told me it was a peanut butter machine
Ok! Cool 😎. But it's not on a boat, so maybe it is! Lol 😅
These were so awesome classic . I had s few.
Here on long island new York salt water ate them up sadly.
Oh no!
Got a motor that you'd like to see me feature n my channel? Shoot 🔫 and I'll give it my best shot!
I live on Long Island and there are still many this style around they made that design for 8 years. I have probably at least 15 of them if your looking for more 18-25HP...
@@OutBoardTink62 they did hold up excellent 👍
My friend has a 1970 100hp v4 still runs .
OMC was awesome.
Sad they are gone.
@@MitzvosGolem1 Your right these engines were simple and reliable actually working on one now as we speak... luv em!
What a beautifull Fast twin ! I hawe only 1 18 hp Evinrude that i haw tacken parts from 20 ears ago and i haw not get some ather same motors yet so i cant get it completly .
Thanks! I hope you are able to find all that you need! I would be willing to send you anything that would help!!
@@ALVintageOutboardsThe old owner bring it and ve take some parts from it i dont remember what it was and he sad that i kan keep the rest of it if i wont.
@@peterlindqvist6998 get the numbers off the information tag by the transom clamps and I may have the parts manual. If I do i could email it to you 📫
@@ALVintageOutboardsThank you for your kindness but i haw so many other motors that i hawe started on so it hawe to wait for his turn !
Where have you been buying your fuel line?
Hey 👋 I just saw this! I get this semi- transparent fuel line at Ace Hardware! I'm not sure if you guys have Ace in Ontario but it's Oregon brand! I love being able to see the health of the fuel pump and if you leave a 'sag' in it, it works like a sink trap and the impurities will gather at the bottom of that 'sag'! It's not the cheapest but we aren't talking about yards and yards of it (meters😊)
@@ALVintageOutboards Yards, feet and inches.. i'm a tradesman. lol
Just covering the bases! 😄
Nice work on that beauty. Hey I aquired a well taken care of 61 18 evinrude last summer. Top cylinder @ 100psi. The bottom@ 65psi. When I pull it over its not making any unusual noise. Is there anything you would recommend me trying to bring up the compression short of pulling it all apart? Thanks
Did you try the Sta-Bil Fogging Oil?
@@ALVintageOutboards I'll give that a go. Thanks
@@jbow27keep me in the loop!!