Kingbolen BM580 battery analyzer & charging tester, pros & cons

Quick test of Kingbolen BM580 battery tester - simple tool to analyze vehicle #battery and car charging system. Load #test for power generator, #ripple test to spot electrical system noise disruption, voltage drop at startup test, waveform display, multimeter, cold crank amp measurement - those are the most important diagnostic procedures while checking and fixing battery related issues. Check how BM580 is performing in those tests.
🛒 Amazon USA: www.amazon.com/dp/B093KHS3GQ/
🛒 Amazon DE: www.amazon.de/dp/B0B1QBCGHR/
👍 Pros
Multimeter
Ripple test
Color display
Wide range of supported battery standards
👎 Cons
Short cables
Laggy interface
No 24V system support
Unclear guides
Unused potential of LCD
🛠 Tech Specs
6V and 12V battery support;
100 - 2000 CCA;
2 - 220 Ah;
Supported batteries: regular flooded, AGM flat plate, AGM spiral, EFB and GEL;
Supported test standards: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB;
Functions: Battery Health Test, Cranking Test, Charging Test, Load Test
Raw data: SOH, SOC, CCA value, CCA rating, voltage, resistance;
Languages: English, Spanish, French, German, Italian, Polish, Portuguese, Russian, Japanese, Chinese, Traditional Chinese;
0:00 Kingbolen BM580
0:40 out-of-vehicle battery test
2:15 multimeter
3:15 in-vehicle battery test
4:05 short cables - difficult to work alone
4:35 charging test & ripple test
5:25 Load test
6:20 Startup test
7:55 Waveform display
8:50 Pros and Cons of BM580
✅ mr-fix.info/​
✅ Facebook: / ​
✅ Instagram: / ​
✅ Patreon: / mrfixpl

[@mototrippl]

A ja właśnie zamówiłem bm550.

[@mrfixpl]

Daj znać jakie wrażenia jak się nim pobawisz.

[@QasimHussain1]

hi there I just want to know if can do mileage correction with obd 11 thanks

[@alexanderthomas412]

The alternator charging voltage is low & not suitable for an AGM battery which would have an open circuit voltage of 13V.

[@mrdan9826]

Hi do you do mail in service. To unlock a mib2 unit.

[@AquinoSamuel]

Mine, I can only save 3 screenshots of the screen, although the specifications state that you can record 10 screenshots. Mine can't record more than 3, and if I insist it overwrites images 1, 2 and 3 respectively. Does yours also have this problem?

[@Mickytdi]

Did it fail to start or what were the symptoms? My 6 year old Passat has the exact same battery but reading approx 400A. On cool mornings i get errors flashing up on the screen when cranking sometimes.

[@mrfixpl]

Old battery in my MK7 gave me ACC and EPB errors on cold start. Faults would disappear as soon as the engine is running, but at crank voltage drops caused couple modules to restart.

[@Mickytdi]

How old is the old battery?

[@krzysztof7077]

Witam. Czy posiadasz jeszcze ten tester BM580?

[@marcinswitalik2299]

A to ładowanie nie za małe troszkę? Z tego co kojarzę w większości przypadków na uruchomionym silniku przekracza 14V

[@mrfixpl]

W tym aucie jest dobierane napięcie ładowania w zależności od potrzeb. A do tego sterowni lubi utrzymać akumulator lekko niedoładowany, aby miał miejsce na przyjęcie prądu przy hamowaniu regeneracyjnym.

[@user-yl5oh5yq7d]

Здравствуйте! Кто нибудь знает,как прибор откалибровать по напряжению?