Lanzar 6000 watt amplifier real power output

Sdílet
Vložit
  • čas přidán 22. 08. 2024
  • UPDATE: This amp still lives and still pounds. It smoked both super cheap 12" subs that said they were rated 1200rms. FYI sub ratings are also not real. I did burn out one side's low pass filter section somehow and have to run it on full range with an external filter. I figured out I was running it wrong. Although it says bridgeable it says 4 ohms or more in bridged mode and by bridging dual 4ohm subs I was running it at 2ohms. It pounds this way but gets hot quick. I got new subs and run them the same. I just redid the heat paste in the amp, added some fans to the amp, and don't run it full blast for extended periods.

Komentáře • 15

  • @kimberlys8008
    @kimberlys8008 Před 5 dny +1

    The only Lanzar amps that are any good and actually produce their rated power the optidrive line, my optidrive 2000.d still works, not being used right now but I ran it at half an ohm for years, might put it in my sons car.

    • @paulksycki
      @paulksycki  Před 5 dny

      Ya those seem on a price level up from the rest and probably do reach their rating. . I'm not saying mine is bad, I'm still using it, I just wish the whole market was truthful.

  • @jaysonwilliam850
    @jaysonwilliam850 Před 7 dny

    I have one of these in my closet
    Never bothered hooking it up but was always curious what they could do.

  • @1ohmwrecker
    @1ohmwrecker Před 15 dny

    Ive heard this on some highs and it gets pretty damn loud lol

  • @elguerocomentero
    @elguerocomentero Před 2 dny

    I'm only 2 min into the video... first problem I see is trying to run 2 12s of a 4 channel...

    • @jay1185
      @jay1185 Před dnem +1

      I'm pretty sure that the front 2 channels and rear 2 channels can be bridged, like a lot of 4 channel amps...

  • @Dominancelogistics
    @Dominancelogistics Před 17 dny

    How is it a scam? It’s a $128 amp. Anyone with common sense knows that a $128 amp would never get you 1250 watts. Check and see if you can buy any other amp for $128 that gets you 700 watts.

    • @paulksycki
      @paulksycki  Před 17 dny

      I'm saying the whole market is a scam and should use the truth in output values.

    • @Dominancelogistics
      @Dominancelogistics Před 17 dny

      @@paulksycki you have to pay for overrated. Rockford, audison, D4S, wolfhard, I’ve never seen them underrated. This amp Stevemojo dynoed. 800+ watts for $129 dollars

    • @paulksycki
      @paulksycki  Před 17 dny

      @@Dominancelogistics Yes Stereo MoJo got 868watts out of the 2 channel version of this. But it was rated at 2400watts 6000watts max.. Yes it is a good price for what it does put out, but why accept a system of lies? If n no one lied then people could actually choose what they truly needed. You will never convince me to accept lies when the truth could have been used.

    • @Dominancelogistics
      @Dominancelogistics Před 17 dny +1

      @@paulksycki you’ll enjoy car audio far more by understanding that it’s about sales. The principle “you get what you pay for.” Always is consistent. You can’t expect companies to be responsible for customers not educating themselves. When anyone buys anything. They should educate themselves about what they are buying. Most people learn the hard way. They spend $100 on an amp that has 6k on it. When a real 6k costs 8-10x the price.

    • @brianwatson3705
      @brianwatson3705 Před 4 dny

      Hey i bought this 85" inch for $120. I mean its only really a 52" but hey it was only $120. Same logic.

  • @grenorrodriguez4301
    @grenorrodriguez4301 Před 3 dny

    You have a copy/ fake lanzar ..lanzar board are green and have specific model and name of manufacturer and uses mosfet transistors

    • @paulksycki
      @paulksycki  Před 3 dny

      I guess that is possible, it came off of ebay. I don't remember seeing the brand silk screened onto the circuit board. I've had custom PCB boards made many times and that doesn't cost extra, you just add it to the design with the component labeling.... It is a class AB amp which is why it has transistors. Class D amps use mosfets on the output.