Audi MMI 3G Low Basic 2021/2022 maps update + activation A4 A5 A6 A8 Q5 Q7 version 5.33 BNav_EU_xxxx

Sdílet
Vložit
  • čas přidán 7. 09. 2024
  • These steps are for MMI 3G Low with the 6.5 inch low resolution display. Not for the MMI 3G high or plus.
    Compatible with A4B8/A5/Q5/A6C6/Q7(2009-): MMI 3G Low Basic Navigation (BNav_EU_xxxxx)
    PXXXX - Factory installed firmware (the firmware that comes with the car)
    KXXXX - Firmware updated later
    South European maps to an SD card on a Win10 PC.
    Makes the route calculations much faster and the access to the maps quicker if you use the SD card instead of the DVD. It also increases the lifespan of the expensive DVD drive since without DVD it does not wear off the laser.
    After the copy on Windows is complete, just insert the SD card on the SD card slot 1 of the car. The navigator should read it properly.
    In this case an 8Gb SD card is enough because the Europe cartography is splitted in two parts. Only one was copied to the SD card. Currently you cannot have both even with a larger capacity card. It seems a technical limitation of the software.
    Since my MMI already had firmware 261, there was no need to update it. Using K0260 would in fact downgrade it.
    ---------------------------------------
    Certain cars have a "pseudo" type of MMI. These are the Audi A3 (8P), A4 (B6 and B7), A6 (C5), TT (8J), the R8, SEAT Exeo and Lamborghini Gallardo - when fitted with the RNS-E DVD based "Audi Navigation Plus" system. Whilst appearing to be a similar layout, and operating in a similar manner, these two systems are very different, are unable to share mapping discs or software, and are not able to control non-ICE functions (such as climate, convenience or suspension settings).
    ---------------------------------------
    Identify your MMI version here: mca.electricmu...

Komentáře • 86

  • @nadeemiqbal4067
    @nadeemiqbal4067 Před rokem +2

    Thanks for sharing. Its not working in my Audi Q7. I tried downloading the update from the link and install it in Audi Q7 2015 (Europe /UK map update). The version currently installed in my car is "MHI2_ER_AUG22_S2140" and Nav Database version is V03959801PR0166 ECE 2018". It keeps giving an error message "No valid update data found on the medium". Can you help / guide please

  • @mp8038
    @mp8038 Před rokem +1

    Boa noite. Pode dar-me o links para download dos mapas West Europe + Activator + firmware update, que não consigo encontrar? Obrigado.

    • @arpcpro
      @arpcpro  Před rokem

      Se os links que aparecem na barra de endereços do vídeo já não funcionam, pesquisa no duckduckgo por Audi BNav 5.33.2 West 2021-2022 e ele vai retornar alguns fóruns com os links. Lamento, mas aqui não posso partilhar links diretos sem ser penalizado.

    • @mp8038
      @mp8038 Před rokem

      @@arpcproObrigado. Já consegui encontrar e tudo funciona perfeitamente. Obrigado pela dica. Entretanto quero fazer a instalação das instruções do mapa para português, já que só me dá em espamhol. Tenho o ficheiro 4G0919884E.Rar (4G0919884E (SDS Language_CD_EU_0006)) mas não sei se é o correto nem como fazer. Obrigado pela ajuda

  • @imdraz_456
    @imdraz_456 Před rokem

    Hi, i need the New firmware for my A4 B9
    ( MHI3-ER-AUG45S-K3283) did you know where can i download it please ?

  • @Portufast-rc
    @Portufast-rc Před rokem +2

    Ola se pode meter os 2 mapas na mesma sd ? vai funcionar ? obrigado

    • @arpcpro
      @arpcpro  Před rokem

      Duvido que funcione. O equipamento não iria saber automaticamente que mapa carregar.

  • @Gozbite_na_MuTaKa
    @Gozbite_na_MuTaKa Před 4 měsíci

    where to download all necessary files activator cards

  • @Briesmi
    @Briesmi Před 2 lety +2

    "Since my MMI already had firmware 261, there was no need to update it. Using K0260 would in fact downgrade it."
    No! P0261 and K0260 are exactly the same Firmware! P is production, K is Consumer Service. There wouldn't be a downgrade. The lifecycle of the MMI 3G has ended, the 0260 will be the last Firmware.

    • @arpcpro
      @arpcpro  Před 2 lety

      Thank you. I was not aware of that fact. I had assumed that P0260 was the production version of K0260

  • @dinel6176
    @dinel6176 Před rokem

    I have a audi q3 2011, can I use this navigation and activator also, or should I use something else? And if I need something else what do I need?

    • @arpcpro
      @arpcpro  Před rokem

      I have no idea. I think there were at least 3 different navigation models for Audi in 2011. That gives you a 33,3% change that it works. You really need to find out details about your navigation model/version.

  • @hristiyanzlatkov8504
    @hristiyanzlatkov8504 Před rokem

    Hello what AMI cabel should i use to listen music in my audi A6 2010 with mmi low basic???

    • @arpcpro
      @arpcpro  Před rokem

      Just turn the radio on and tune a station. It will play music. Or put MP3 on an SD card. Or sync the mobile phone over bluetooth. No cables are necessary. If you have a jack input, then a 3.5mm Stereo cable.

    • @HristiyanKirilov
      @HristiyanKirilov Před rokem

      @@arpcpro do you have facebook profile mate so i can show you pictures, it reads the Sd card slot 1 but it doesn’t let me to enter in the sd card folder

  • @csmusic597
    @csmusic597 Před rokem

    which mmi should be audi q7 2011? mmi basic, mmi+ or mmi high? anyone knows?

    • @arpcpro
      @arpcpro  Před rokem

      It might be the basic or the high. Does it have google maps and internet?

  • @alexandru2373
    @alexandru2373 Před rokem

    Can i put in a4 b8 facelifit from 2014 with soft version bNav_EU_P0256_D1 the new maps without updating the software version?
    I have ECE 5.16.2 current maps

    • @arpcpro
      @arpcpro  Před rokem +1

      I would say yes you can, but without 100% certainty. Try to follow the procedure I did of just updating the maps. The firmware update is for bug corrections and does not add any new feature.

    • @alexandru2373
      @alexandru2373 Před rokem

      @@arpcpro and can i update the software directly to the latest version , k0260 or i need to install every firmware until k0260?

    • @arpcpro
      @arpcpro  Před rokem +1

      @@alexandru2373 From what I've read it is a direct upgrade

  • @banditorunner6946
    @banditorunner6946 Před rokem

    The links dont work anymore, have you got any new ones that might work please?

    • @arpcpro
      @arpcpro  Před rokem

      No I don't have any. Search for them on duckduckgo or check for example nachtfalke biz or audiklub cz.

  •  Před rokem

    Hello I have imported a car from Japan to Germany (Audi Q5 Hybrid 2013 model). It uses HN+_JP_AU3G_PO384 navigation version. Is it possible to convert the region from Asia to Western Europe through an update? Thanks a lot.

    • @arpcpro
      @arpcpro  Před rokem +1

      I never tried but there seems to be another procedure for region conversion through the engineering menus: pt.scribd.com/doc/300470694/MMI-3G-Region-Conversion

  • @ricardofelix9795
    @ricardofelix9795 Před rokem

    Boas nao me consegues passar esses ficheiros ? , no link o arquivo esta divido em 61 ficheiros , tu fizeste download assim ?

    • @arpcpro
      @arpcpro  Před rokem

      Eu saquei 3 ficheiros .rar e 7z que aparecem no video aos 1:01 minutos. Tenta sacar de outros links que sugeri nos comentarios anteriores. Ou carrega no link com o botao direito e escolhe Guardar como.

  • @curiosityhurts4453
    @curiosityhurts4453 Před rokem

    Hi! Can you help me find the green screen in my car pls, it has the same version as this model bnav, i tried to combine all the buttons but it’s impossible.. thanks 🙏🏻

    • @arpcpro
      @arpcpro  Před rokem

      You do not need any "green screen" in this video. I think you are referring to the engineering menu. To enter this menu, you need to hold the Car and Set up buttons simultaneously for a few seconds.

    • @curiosityhurts4453
      @curiosityhurts4453 Před rokem

      @@arpcpro my problem is the AMI device which isn’t recognized by the MMI, it appears device not connected while the AMI Is functional in my phone, I saw a video where I have to open a green screen which is hidden to diagnose the problem of AMI

  • @KS-vs4ke
    @KS-vs4ke Před rokem

    do you have also a video on how to update the firmware, Thank you

    • @arpcpro
      @arpcpro  Před rokem

      No, not for this car/navigator. Only for the older A4.

  • @vokdbs1175
    @vokdbs1175 Před 2 lety

    Hi, I wanted to know how you did to put the folders like this, to make the installation, I have all the files but they come in folders that are not like yours.
    Can you also install on DVD/CD?

    • @arpcpro
      @arpcpro  Před 2 lety +1

      I am not sure what you have downloaded. If you have an *.ISO file, you can burn it to a DVD. Otherwise, just install 7zip and uncompress the ISO. Uncompress your downloaded files more than once if necessary.

    • @vokdbs1175
      @vokdbs1175 Před 2 lety

      @@arpcproOk thanks, but I have already fixed it as the files were corrupted so I unzipped them and that's it. But I bought the DVD to install it I did everything and did not read it, then I did it by SD card and it goes perfect. PD: I did it with the Bnav_K0260_1_D1 version and it works perfectly.

    • @Everything-One
      @Everything-One Před 2 lety +1

      @@vokdbs1175 It's good to know you got it working. The DVD player can be picky about the burned DVD-R/+R, especially if it already has some dust on the laser. I always burn the DVD at the slowest possible speed. Using the SD card you save the life of the laser and the loading and route calculations are much faster. Because it is only a matter of time before the player starts having problems reading even the original DVDs.

    • @vokdbs1175
      @vokdbs1175 Před 2 lety +1

      @@Everything-One Yes, but I think the MMI 3G Low does not read DVD+R DL, as the maps take up more than 5 GB. The DVD I had before was the original one with the 2018 maps and it read it perfectly.

    • @vokdbs1175
      @vokdbs1175 Před 2 lety +1

      @@arpcpro Although Audi's version 5.34.2, which is the 2022 maps, has been released, these are the 2021/2022 maps.

  • @joaoratao3920
    @joaoratao3920 Před 2 lety

    Ola ! O carta sd numéro 1, tem que ficar sempre dentro agora? Nao da para instalar en CD?
    Obrigado

    • @arpcpro
      @arpcpro  Před 2 lety +1

      Sim, dá para gravar em DVD dual layer. Caso contrário tem que se manter o cartao no slot SD1. Mas com a cartografia no cartão de memória o sistema é consideravelmente mais rápido a arrancar e a calcular as rotas. Além do facto de que poupas o laser da unidade DVD de desgaste.

  • @carlosrodrigues5887
    @carlosrodrigues5887 Před rokem

    ola,poderias fazer um video en portugues para atualizar firmware e os mapas + ativaçao e se for possivel com radares??tenho um como o teu👍👍👍🇵🇹

    • @arpcpro
      @arpcpro  Před rokem +1

      Não sei pôr radares no MMI 3G Low/Basic. Se descobrires algum procedimento diz-me, que eu faço um video. Não tenho tempo para fazer videos em portugues. No PC, liga as legendas no botão CC, e seleciona Auto-translate para Português.

  • @EDDY-lv6li
    @EDDY-lv6li Před 2 lety +1

    hello cool video, where can you download this?

    • @arpcpro
      @arpcpro  Před 2 lety

      Search on duckduckgo.com for Audi BNav 5.33.2 West 2021-2022 and you will get some results of forums containing the links. I cannot share here direct links, sorry.

    • @nikolalekic272
      @nikolalekic272 Před 2 lety

      @@arpcpro For HNav ?

    • @arpcpro
      @arpcpro  Před 2 lety

      @@nikolalekic272 This tutorial is not for HNav. It is for the DVD based versions.

    • @Briesmi
      @Briesmi Před 2 lety

      Wanna have the latest maps 5.34.2 ?

    • @vokdbs1175
      @vokdbs1175 Před 2 lety

      I did this tutorial to get the 2021/2022 maps, then over the months, I bought the Audi 5.34.2 version (Maps 2022) and it doesn't make much difference. Not very essential to update

  • @andrepereira7953
    @andrepereira7953 Před rokem

    Olá
    Qual é o site para fazer o download disso?
    Já eu tenho um audi a5 de 2010 que é o MMI 3G basic, é tudo igual certo?

    • @arpcpro
      @arpcpro  Před rokem +1

      O site está no topo do video, na barra de endereço do browser. Não posso partilhar aqui nos comentários para não ser penalizado. o 3G basic penso que é low, portanto será igual sim. Mas confirma se os numeros das versoes sao parecidos (ao 1:38min no video)

    • @andrepereira7953
      @andrepereira7953 Před rokem

      @@arpcpro não dá para fazer o download disso no site que dizes

    • @arpcpro
      @arpcpro  Před rokem

      @@andrepereira7953 Ok, é porque já removeram os links ou apagaram o post. Então tenta pesquisando no duckduckgo ponto com por " 8P0060884DJ forum " que aparece alguns links. Do automotiveforum net, do r8talk com e do garageforum org por exemplo.

    • @andrepereira7953
      @andrepereira7953 Před rokem +1

      @@arpcpro 8P0060884DJ

    • @andrepereira7953
      @andrepereira7953 Před rokem

      @@arpcpro não me consegues enviar para o email o link do download disso?
      Agradecia imenso, não consigo simplesmente encontrar

  • @imerramadani444
    @imerramadani444 Před rokem

    Hello, where can I download this?

    • @arpcpro
      @arpcpro  Před rokem

      Search on duckduckgo for Audi BNav 5.33.2 West 2021-2022 and you will get some results of forums containing the links. I cannot share here direct links, sorry.

  • @zakariaelmoustahi4800

    Salut j'ai un problème mon autoradio mise a joure

    • @arpcpro
      @arpcpro  Před rokem

      Je suis désolé de l'apprendre. Les problèmes sont ennuyeux.

  • @valetelobitolobito8273

    ola amigo onde conseguiste a firware 261

    • @arpcpro
      @arpcpro  Před 2 lety

      Veio com o carro do concessionário. Se reparares tem a P0261 e nao a K0261. A letra "P" indica que veio assim de fábrica e nunca foi actualizado. A letra "K" indica os nossos upgrades DIY.

    • @valetelobitolobito8273
      @valetelobitolobito8273 Před 2 lety

      Boas amigo quero instalar os mapas não consigo passar do start carrego mas não dá nada

    • @arpcpro
      @arpcpro  Před 2 lety

      ​@@valetelobitolobito8273 Possivelmente será o cartão SD que não foi bem preparado com os ficheiros correctos, ou não foi formatado em FAT32, ou é um SDXC e não um SDHC. Como pode ver no video ao minuto 2:45, eu não preciso de fazer nada. É só inserir o cartão, ligar o GPS, e aparece logo a pergunta "Instalar base de dados".

    • @valetelobitolobito8273
      @valetelobitolobito8273 Před 2 lety

      Ya amigo mas no meu ponho o cartão e só aparece a controlar suporte dados. Aguarde e não sai daqui já fiz de tudo e se fizer instalar os mapas quando faço start download e depois vai para o start carrego e não dá 🤦🏻🤦🏻🤦🏻

    • @videosfamiliaribeiro
      @videosfamiliaribeiro Před 2 lety +1

      @@valetelobitolobito8273 Pode ser várias coisas, inclusivé cartao defeituoso. O cartão tem de estar formatado em FAT32 para funcionar. Use um SDHC no maximo com 32Gb. Formatar o cartao com o SD Formatter, e depois testar o cartao com o h2testw.

  • @18kril
    @18kril Před 2 lety

    És português?

  • @murattopcu439
    @murattopcu439 Před 2 lety

    Where can i get the full update with all maps do you have maybe a link 😳😁

    • @Briesmi
      @Briesmi Před 2 lety +1

      I have a link for the latest Maps 2022, 5.34.2

    • @murattopcu439
      @murattopcu439 Před 2 lety +1

      Can u send me the link

    • @mrsbrownsboysofficial
      @mrsbrownsboysofficial Před rokem

      @@Briesmi hello sir, can you send me also the link please to download the latest maps
      thank you

    • @evelingradinaru8028
      @evelingradinaru8028 Před rokem

      @@Briesmi hello, i wanted if u can send to me

    • @veliborikonic
      @veliborikonic Před rokem

      @@Briesmi can you send me a link please 🙄🙄🙏😄

  • @liondany_official
    @liondany_official Před 2 lety

    Where do you get the data from, like on which website?

    • @arpcpro
      @arpcpro  Před 2 lety +1

      If it is not obvious from the address bar on the video, then search on duckduckgo for Audi BNav 5.33.2 West 2021-2022 and you will get some results of forums containing the links. I cannot share here direct links, sorry.

  • @alexbelysymo6618
    @alexbelysymo6618 Před 2 lety

    I don t find activator.

    • @Briesmi
      @Briesmi Před 2 lety +1

      I can give you latest map 2022 , 5.34.2 with activator for firmware K0260.

    • @alexbelysymo6618
      @alexbelysymo6618 Před 2 lety

      @@Briesmi How bro?