I watched them spinning big stuff at Arts Metal Spinning , outside of Vancouver BC . Canada . Never got over the endless possibilities for metal fabricating . Liked their background display too .
Beautiful work. I've seen it done in a more primitive work shop. Takes a skilled hand not to thin it down to much an its good to start with good metal. I've seen horns made an refinery parts made. That was nice work. Thank You Loader.
I did metal spinning for a few years after high school but mostly with brass and aluminum. Brass bed and lamp parts. Even made aluminum hoppers for Dunkin' Donuts. Loved the work.
Very cool video . Wish you could have elaborated on the different types they were turning and why certain actions were being taken by the turners and helpers !
Bollocks - frankly. Does he look like he's been doing the job for 5 minutes - since the last guy lost his head or arms? How did he get to be that old and skilled if head or arm removal was a realistic possibility. Armchair Safety Officer.
Enjoyed the video very much, thank you for putting these clips together with especially the sound of the machine so as you can hear the load being applied. In my opinion that is better than having to turn down annoying music and hear nothing. John, Australia. PS Thumbs up.
Iap tran, I don't understand what you mean, unless something is somehow changed a bit by me having to use Google Translate. John. Iap tran,我不明白你的意思,除非我不得不使用谷歌翻譯改變了一些東西。 約翰。
He means that many videos have annoying music, and if he reduces the volume of the music he cannot hear the machine. The same problem occurs in videos for cars and engines
@This Old Tony do you see how they have one bloke holding something on the edge whilst the other shapes it maybe something like this would stop yours from buckling.
Spinning has always been impressive... years ago I used to spin products off a 120 inch lathe... (with no assistance) if you've spun larger than that, I'll be very impressed!
Metal rolling is an art! Special alloys are available for aerospace products operating at very high temps. We used RA-330 & other materials for combustion chambers for the turbine engine start carts for military apps. Also, we used rolled wheel halves for "Rich Bogart Racing Wheels". (Phoenix Az) Pick your width & offset for a perfect fit. Really fine products! 👍
brave man. I did silversmithing at University. We had a visiting instructor who was to teach us spinning. he had a deep and long scar from his forehead, across his cheek and into his chin. He learned the hard way, made all of his students very nervous.
The first one was clearly a vase and the second one looks like the air vents that price manufacturing makes for the prisons and other large comercial buildings.
Před 6 lety
Then why did they punch holes around it? They could have told us what they are making.
Tony Papantoniou if that is a vent the holes are for rivets. At price they make several different sizes and then rivet them together in a cone shape to create several paths for airflow much like your typical square vents at home.
Shaping that huge disc is very hard work, I hope he's well paid for it. Does anyone know what the bowl shaped item is for, some explanation on these vids would be most helpful and what country each item was filmed.
That second one looks remarkably like a place I used to deliver sheet metal to in North London. They made big dished ends for tanks and vats. I'll be honest - it scared the shit out of me just going in there.
Только ЛАЙК, молодчик мужик, ни кождый согласиться на такую работу, я точно нет. Замотано и не успеешь опомниться. Хотя чугун, всё может быть, но подготовка всех преблуд и станок включая, может занять не один месяц. Удачи!
I made a 30" x 9" boss from 1" multi ply for a mettle spinner mate some years ago to spin large aluminium bowls I think to be put together to bounce some sort of electric current around ?. they did it with 1" fozzy bronze tips in their wooden mandrel s Cheers Tippo..GB.
I watched them spinning big stuff at Arts Metal Spinning , outside of Vancouver BC . Canada . Never got over the endless possibilities for metal fabricating . Liked their background display too .
Thanks great video even better because you put no silly music over it.
I find your comment discriminatory and offensive..... If Dems win next election I'll sue you.
@@thatoneguy-rp7dh EH?!!!
Its getting harder to find a video without silly music . Congratulations
Those 2 make a good team. Nice video!
Beautiful work. I've seen it done in a more primitive work shop. Takes a skilled hand not to thin it down to much an its good to start with good metal. I've seen horns made an refinery parts made. That was nice work. Thank You Loader.
I did metal spinning for a few years after high school but mostly with brass and aluminum. Brass bed and lamp parts. Even made aluminum hoppers for Dunkin' Donuts. Loved the work.
Ed Harris, great professional! 😁
Very cool video . Wish you could have elaborated on the different types they were turning and why certain actions were being taken by the turners and helpers !
Yeah. How big is the bloody apples that go in that first bowl??
Sexy videos
來臨門
H
Ye konsa des me
hai
Nice poster collection.
T H we had better one but the PC assholes made us take it down
Standard in UK, they're called Pin-Ups.
I like the poster with the car
T H kko
canadianöuo īyweld6yyer
One tear on that metal spinning and there goes the head or arms 😱
Bollocks - frankly. Does he look like he's been doing the job for 5 minutes - since the last guy lost his head or arms? How did he get to be that old and skilled if head or arm removal was a realistic possibility. Armchair Safety Officer.
@@sideshowbob5237 ur right.. risky for new guys
Enjoyed the video very much, thank you for putting these clips together with especially the sound of the machine so as you can hear the load being applied. In my opinion that is better than having to turn down annoying music and hear nothing.
John, Australia. PS Thumbs up.
joandar1 唱歌9吗
joandar1 翻从风格各异方便
Iap tran, I don't understand what you mean, unless something is somehow changed a bit by me having to use Google Translate. John.
Iap tran,我不明白你的意思,除非我不得不使用谷歌翻譯改變了一些東西。 約翰。
He means that many videos have annoying music, and if he reduces the volume of the music he cannot hear the machine. The same problem occurs in videos for cars and engines
Bernard W Thank you, makes sense. John.
@This Old Tony do you see how they have one bloke holding something on the edge whilst the other shapes it maybe something like this would stop yours from buckling.
The missing ingredient could be the pictures on the wall.
These videos are truly fascinating! Thanks for adding them.👍👍👍👍
Amazing Spinning! Amazing Metal Processing!
Spinning has always been impressive... years ago I used to spin products off a 120 inch lathe... (with no assistance) if you've spun larger than that, I'll be very impressed!
3:29 the ghost cackles one final time as it is trapped in the vessel. Good work, boys!
Man,if OSHA saw this guy using his bare hands on a high speed spinning piece of metal they would freak out.
And aren't you supposed to roll up long sleeves? 😳
Love how the two guys work together as one .
Because they have a common ground in watching; ladies naked pictures daily.
That's why they work together as one.
5:52 Ed Harris in his most dangerous role.
HAhaahahaha, exaclty
never knew Ed Harris was so multi talented
No ads, ball's of steel shined to perfection
Looks like the Max Headroom guy had to get a day job.
damn that looks dangerous. great job man, really a skill
Metal rolling is an art! Special alloys are available for aerospace products operating at very high temps. We used RA-330 & other materials for combustion chambers for the turbine engine start carts for military apps.
Also, we used rolled wheel halves for "Rich Bogart Racing Wheels". (Phoenix Az)
Pick your width & offset for a perfect fit.
Really fine products! 👍
Now I know how UFO's are made.
excellent way to make car wings /fenders . if in the usa.. just form and then cut in half.. hey presto
mesmerizing...
watched it 3 times, still not sure what they are making, but still bad ass...
I think this is the first time I have seen hand held tools used in metal turning!
that's some amazing shit I've never seen before....ty
brave man. I did silversmithing at University. We had a visiting instructor who was to teach us spinning. he had a deep and long scar from his forehead, across his cheek and into his chin. He learned the hard way, made all of his students very nervous.
What exactly is the risk? Seems rather low risk to me?
I been to a place in Colorado where Two brothers spun metal, they used big maple molds
great stuff
Jesus Christ I’ve been a CNC machinist for 17 years. I had no idea you could use hand tools on the lathe. That’s nuts.
súper vídeo . súper work exelente..thx. gracias....
Nice pictures on the wall :)
Highly talented craftsmen cheers from a manual machinist
3:30 Looks like these guys get inspired by ladies naked pictures on the wall, to work hard through out the day.
Isn't there a guy on the wall too?
I think every workshop is required by law to have these posters...
11
Keep your eye on the prize
It's not a raditional British workshop if the walls aren't plastered with tits & ass
And i think those are big light reflectors for like stadiums
Metal spinning is a lost art.It almost remind me of metal forming.
Nice hearing protection!
That is some great work
What an expert touch these men have.. Bravo! Skilled professional labour is hard to find... Well done men..
It would be nice to know what they are making. Very interesting procedures.
Me too!
The first one was clearly a vase and the second one looks like the air vents that price manufacturing makes for the prisons and other large comercial buildings.
Then why did they punch holes around it? They could have told us what they are making.
Tony Papantoniou if that is a vent the holes are for rivets. At price they make several different sizes and then rivet them together in a cone shape to create several paths for airflow much like your typical square vents at home.
They should show a picture of the finished items.
This job very good
A workshop inside a brothel
Remember when every workshop used to have posters like that?
Google "Rigid tool calendar". Miss those...
Ah, bad times, bad times.
Сказ о том,как быстро запилить тазик) Very good. Golden hands.
Un maestro en su profesión ...y bonitos posters
Was so into the work being done I didn't see the ladies on the walls until my SO pointed it out. lol Amazing stuff.
Nice job.
yup 1:14 to 3:54 mm love the back round i wander what books thy came out of lol ?
Satisfactory ☺️
Are those gongs that guy was making?
Super technical video
AMEZIN MUSIC good
Pink Floyds new speaker cones and horns for his Leslie speaker cab.
stratocaster1greg
yeah man,
any color you like... ;-D
gua fokuss sama gambar yang nempel di dinding sebelah nya😄😄 amazing...
So very dangerous. These are highly skilled operators. Respect.
Hello, I am Marwan from Morocco and I have mastered this craft
ils ont de beaux poster quand même :p
This is really satisfying to watch. I'd never go close to one though. Seen too many videos of people being sucks into them!
- ТБ?
- не, не слышал
Разок на рукав намотает - будет вспоминать на пенсии по инвалидности .
fantastic!
Shaping that huge disc is very hard work, I hope he's well paid for it.
Does anyone know what the bowl shaped item is for, some explanation on these vids would be most helpful and what country each item was filmed.
The posters in back are pretty funny. That would never fly in our facility, too PC.
That dude is a real man bad ass
I like the posters
Up until 8:15, no CNC involved. Nice lathe work, though. Thanks for letting us hear the machines with no annoying music.
That second one looks remarkably like a place I used to deliver sheet metal to in North London. They made big dished ends for tanks and vats. I'll be honest - it scared the shit out of me just going in there.
💥Great 💡 amazing perfect 👍
啊伯手藝美邁哦
The more attractive the video is, the more useful information the author has
how it looks good , you have very nice skill . my job is welder , thank you .
Super video wie immer und einen schönen Tag wünsche ich euch allen noch
Back in the good ole days, when real men knew how to turn a massive copper buttplug ...
Только ЛАЙК, молодчик мужик, ни кождый согласиться на такую работу, я точно нет. Замотано и не успеешь опомниться. Хотя чугун, всё может быть, но подготовка всех преблуд и станок включая, может занять не один месяц. Удачи!
That seems like a good way to keep something in tolorance
La bermudas son obligatorias para el oficio?
Who knew Sting was so great at metal spinning
Nice spining working
really enjoyable
amazing ,cnc spinning is similar way
What was that?? The death ray dish??
How much for two of these large bowls made in this video with (L) flanges at the outer edge?
Hell of a strong guy. Beautiful teamwork.
Super ! The best, the machine doesn't working but the human working.
Maestro de maestros increíbles trabajos ¡felicidades!👍
que diferencia hay entre este método y usar molde y prensa?
Looks super safe.
I made a 30" x 9" boss from 1" multi ply for a mettle spinner mate some years ago to spin large aluminium bowls I think to be put together to bounce some sort of electric current around ?. they did it with 1" fozzy bronze tips in their wooden mandrel s Cheers Tippo..GB.
Could you imagine what that guy would do if his daughters boyfriend had her home too late? "Come here boy, imma show you how we make'em squeal!"
votre travail est formidable svp peut on repousser un disque en inox inoxidable
That is one bodacious "live center"
зур
@@xulomiskandarov6685 त्रबश
Very impressive was it a large bowl for cooking?
What would it cost for me to get 2 of those bowls made with a 4'W x 2'H? Message me if possible
good~~
I need the first one, I’m going to use it as a FMJ to cover my giant pellet.
Belo trabalho, porém faltam equipamentos de segurança e proteção!
long shirt short shorts. Top Job. Safety first :D
you should try flame spinning titanium or inconel now thats a pucker factor!
Crazy boys crazy wallpapers dude's 😜
Dadi ne bisa apik nemen..joslah pokoke..alekit
Gods of metal working