An Old Microwave And What To Do With It - An Electromagnet And A Phone Charger
Vložit
- čas přidán 16. 04. 2020
- If you want to have a look at those special videos become a member and join by clicking this link / @thinkingandtinkering
There is just a ton of things you can do with an old microwave, you can make an inverter, a welder, an electromagnet, a charger, a homoplar motor, a homopolar generator - just a ton of stuff - i made two things here and a 3 rd on the mebers channel but really you could spend weeks playing with the stuff that's in there. - Věda a technologie
In schools they have exchange students, but I like to think of Robert and Scotty Kilmer as exchange teachers between England and the USA. If I knew a fraction of knowledge that either of them have, I'd be so much better off. Thank you sir, for sharing your vast and very practical knowledge.
So true
Wow that’s quite the compliment, I happen to wander into this channel while eyeballing potential projects and basic knowledge .
TIP: Your music volume should be 70% of the voice audio level. Music always sound louder.
unlike many of the multitude of tech-hacking videos, Robert actually created something useful. Bravo sir!
Edit: the smile and laugh at the end by itself was worth watching this video. Subscribed.
um please make your self a swirly jacks . their even simpiler to make and use yup . enjoy makeing simple improvements yup
Nice to know you are not alone when it comes to the simple joy of playing with bits and pieces of electronics - thank you!
21:22.
I think we all wanted to see the phone lighting up just as much as Robert did.
Very gifted gentleman.
lol - cheers mate
@@ThinkingandTinkering
Nice to get a personal response from the man himself.
Appreciations from a regular viewer across the pond in the US.
@@SI00000 no worries mate and have good one
Your explanation of the shaded pole motor was spot on ,most people have no clue why the copper ring is there . Do an episode where you dig the ring out and the motor just sits and hums and gets hot. With out the artificial phase it can’t start. Great job.
cheers mate
I always wondered how they worked and what that heavy copper wire was for. I part dismantle the iron former and use the coil and iron core to show how to generate AC using passing magnets on a bicycle wheel.
Bravo! From here in the States, good show old boy! Best of luck!
I also have an electronics workshop in my basement. I've been building electrical and electronic gadgets, and mechanical gadgets, since I was 10 years old in 1964. Model railroading is what got me interested in electrical things. I've been finding things someone was throwing away, taking it home and removing all the components off the circuit boards and I have quite a collection of parts I can use to make things with. Thanks for the ideas I can use for trashed microwave ovens.
glad it gave you ideas mate
i do the same
Yes. I picked up a microwave oven at the local dump a while back. The only thing wrong with it was that the light bulb that you removed at 3:50 was blown. Nothing wrong with the rest of it. But that's the world we live in these days. No one repairs anything. They just throw stuff away and buy new stuff... Two bucks to replace the light bulb as opposed to a couple of hundred for a new microwave.
Couple hundred?
I love these videos. My Dad was a blacksmith all his life (no not just horse shoes). They were the original recyclers and I grew up with making 'things' out of other 'things' and thinking outside the rubbish bin.
awesome mate - I love it too lol
That is just the way to be=creative. Same way with cooking.
Blacksmithing is a very versatile Art and one well worth preserving across its whole range.
The way you explain everything on the laughter and enjoyment you get from simple projects to complex,i definitely subscribed. The laughter and amusement you got out of making a simple phone charger made me lmao
such unbridled joy! what a pleasure to behold!
I've made a stick welder with one before, but the most fun(and I've never seen anyone else do) is I made a guitar magnetic pickup with one.
The Interfal fan has copper wire perfect to make the coil part, and there's also ceramic magnets inside that work perfect as the pole pieces, I mean they're the correct size and lengths its remarkable. It turned out great and sounded just as good as commercial pieces.
The joy on your face after completing and testing the phone charger is infectious!
cheers mate
Robert's laugh is so genuine it has made me look back at each and everyone of his videos I'm so thankful for your work.
You are speaking my language. I’ve been wanting to find a person that could show me the ropes on reusing stuff that has broke or does not work, but use the parts for new stuff. I find all kind of stuff on the side of road, dumpster diving too. Which I hadn’t been in a while. But something about motors I like. I want to keep vacuuming cleaners motors, fan motors, if it has coil in it and rotates, it just speaks to me. I don’t know anything about motors and generators. But I’m learning. So a alternator is a generator! Simple stuff right now I’m picking up.
I hope you have more like these on your channel. 🎉🎉🎉🎉🎉🎉
Thank you so so so much! ❤
The best part of this video for me is the guys smile when he powered up the iPhone. I am a black man from Watts California and I have not had many positive encounters with caucasian males, however, I absolutely feel that this gentleman is a wonderful human being. Thanks for sharing your wisdom.
I am always looking for re-purpose videos just like this one. Mainly I am a gadget fiend and really like seeing videos like this one. Very original and quiet entertaining at the same time...not to mention somewhat useful too! Really enjoyed it, placed a like and I subscribed. Looking forward to more vids, like this one...Cheers!
Cheers Robert, my friend. With your Infectous laugh 😂.
GREAT!!!
Grate video, My granddaughter & grandson and I would just make plasma Pretty boring. So now Deconstructing is our next mission .
It was a pleasure to see the pleasure you got from working the charger ! Nice project , I've scrapped many of these so its nice to see what alternatives I can do with some of the parts !!
Glad you enjoyed it mate - cheers
Next, connect a hamster wheel to the hand crank of the charger and let the hamster do the work while you cannabilze more stuff.
@@ThinkingandTinkering ³0³3³
Hey Robert, I've just discovered your channel and well mate you are incredible! So many things that can be used to help the grandchildren with school science projects. Keep up the great investigations!
cheers mate - thanks for taking the time to post
Your genuine delight in cranking the smartphone into life was worth a Thumbs Up by itself. Thanks for the post. Good work.
While I have opened more than 15 microwaves (found on the street); many working I learned much from your tutorial. What impressed me the most is your lovely charming personality. I thank you and send all the best from New Rochelle N.Y.
Excellent job building the hand crank phone charger. You could mass produce that and sell as an addition to survival tools/emergency pack.
I like it a lot!
amazing idea actually
@@OMNITEK LOL
Love this vid. It’s nice to know there are people out there like me! Although you are much more knowledgeable TBH. Keep up the good work
That laugh at the end was just the best, it's so nice to watch such genuine enthusiasm!
A much better invention than the wind up radio!
One of the most interesting videos that I have seen. Thank you.
Fun to sit and watch. It gets the creative wheels turning:) Thank You!
awesome mate - that indeed was the point of the vid - really glad you liked it
That's it. I'm dismantling the old microwave I've been tripping over in my shop for the last two years. Thank you very much for this! 👍
I learn something new in each of your videos. Thank you for posting them!
Nicely explained Robert, I found lots of thrown away microwaves which I took to bits for the 2 magnets and the copper and wish I'd seen this film because I put the rest to recycling including those £100 bits off the magnatron. Loved your response when you managed to start charging your phone, hilarious, a genuine pleasure to see.
No way does that one capacitor cost or is worth £100… that makes no sense.
@@davadoff, fair shout, who knows what things cost but nothing surprises me anymore. As to what I said 2 yeas ago but re-reading the comment I guess the narrator had said the £100 figure because when I typed 'those £100 bits', that figure came from the script and not from my thoughts on electronics costings.
@@petergambier yeah you were correct, he said £100 in the video for the capacitor. Maybe he misspoke, but it didn’t seem like it.
If any of the bits were worth £100, you could buy new microwaves for £50 each, pull out the bits and sell them for £100. So can’t be true.
I guessed he looked on eBay and saw £100 asking price but it doesn’t mean anyone bought any.
The only thing needed now is someway of using it to hold a charge with a capacitor.... wait a min.... didn't he say there was a bit expensive capacitor he took out ;-). This is the kind of thing you can use it to put a voltage into some batteries for emergency use during black outs that are being predicted this winter in the UK. Now where can I find a couple of knackered thrown out microwaves 🤔
@@Aspie_Geek_UK , either dumped in the street or try you local dump.
that was one happy man at the end.. : ) bloody brilliant!!
Great laugh at the end, warmed my heart
Reminds me of my electronics teacher in high school.Twas the reason I continued studying it and ended up in telecom, where the jobs were. Your hobby speaks to me of a passion long past.
awesome mate
I came looking for comments about not wearing glasses when using an angle grinder, but I found none! Amazing! Either people are learning to keep their mouth shut (not likely) or the comments are managed. Either way, I really enjoy your videos!
I watch your videos for your scientific knowledge and endeavours.... my wife loves your infectious joy when you make something that works 😂👍
That is awesome mate - cheers
Excellent video,yer a man after my own heart, throw nothing away, it'll always come in handy ⚙️
apparently microwaves are a hot topic in chemistry, green chemistry to be specific, because they can be used to perform reactions that take hours of refluxing in minutes. Microwave assisted reactions also happen to give relitevly high yields. some reactions can also be performed neat with the assistance of a microwave. I think it's worth looking into!
🇬🇧 August 2023
Bluddy brilliant - as ever! 👍🏽
Pretty cool Robert. I bet you could mount the charger up to a bicycle so electronic devices could be charged while pedaling around the neighborhood. That would be a great project for any bored kid, looking for something to do during the pandemic. Might make a nice part 2 of this video.
Pandemic? LMFAO
@@VeritasEtAequitas bored kid pedaling around with a mask and a crank generator, LOL
Was thinking almost the same. Hook to waterwheel at the stream and have it charging 24/7
@@retromodernart4426 I dont see what's wrong with encouraging kids to go out more in this day and age instead of sitting in their bedrooms all day playing computer games etc, especially during the pandemic when they have the perfect excuse to say they want to stay in! Yes I know we are supposedly out of the pandemic here in October 2022, but even back in mid 2020 we were allowed to go out to get exercise and cycling to charge a phone is great exercise 😉
@@Aspie_Geek_UK I wasn't making fun of the going outside and exercising and getting fresh air part.
I was making fun of the 'pandemic' [scamdemic] pathological fear-control religious rituals, such as wearing a mask while exercising or just even walking, alone, outside (that we all know still goes on today in a certain deranged percentage of the population).
Regular exercise in fresh air outside is obviously always good, except if one is a victim of injected mRNA infections, as we are now seeing.
Great video your presentation style and humour make it far more interesting!
Out here in Slovakia we reuse everything nothing gets thrown away shame the UK is the throwaway society!
thanks for the ideas sir, now time to hit a thrift store for a cheap microwave...really appreciate it
Love the attitude "You've only got yourself to blame" 🤣😂 Good old school teachings . Love it
OMG, will you be my cool uncle? LOL. Loved how you truly appreciated the phone charger working. Very interesting. Thanks. Video zooming in a bit more would be really helpful, but you have a great channel.
Excellent video, could you show us, using the transformer from the microwave, how to make a induction coil to quickly heat up metal for heat treating.
Hahaha! Reminds me of my youth. We seldom had money so we fixed things using broken or scavenged bits.
I still have my first car, it’s clutch linkage is made from rotor-tiller tines and some round stock, it’s carb has a return spring from a screen door going to the firewall, it has a driveline that fit off a scrapyard truck, and so on.
A synchronous motor is great for making clocks. They make excellent time references.
What a breath of fresh air with regard to the health and safety warnings. I get so fed up with the pathetic 'don't sue me if you kill yourself' warnings that infest otherwise interesting channels like this. It makes me proud to be English.
Yes, let natural selection take its course.
To be fair, if you don’t remind Americans to breath they will sue you.
To be fair, if you don’t remind Americans to breath they will sue you.
@@MortifiedU, sure..... Blame Americans for everything!! 😠😡
@@lylecoglianese1645 lol not blaming American for everything. But have you seen the level of education in some of America..
Great information and spurring me on to make the semaphore indicators for my old car. I dismantled my first battery powered reel to reel in the mid 60's aged 7. Always liked taking things apart and eventually learned how to put them back together. Learned how to not throw stuff away from my parents and now have a garage full of motors, fans and pumps waiting to be re-purposed. Keep up the good work.
I really appreciate your meticulous attitude toward reuse !
What! ring magnets!!! 😮😮
Now those sound fancy!
With the gears that were already in the motor you could make a gravity charger like those gravity lights. Hang it from some string somewhere up high, attach a weight like a bag of flour, sit back for a couple of minutes until the flour lowers to the ground, repeat.
Cool idea :))
Just a thought - while I've never HAD it happen, there's always a chance that the HV capacitor could still hold a deadly charge if mishandled.
Might have been good to show how to short the terminals with a screwdriver for those who are unaware or careless, rather than just reaching in blithely.
I do generally agree with the concept of 'caveat emptor' - adults absolutely must take responsibility for every project they undertake - but in a sense we're modelling behaviour when we do 'how-to' vids, so I'd probably add that if I were doing one of these.
The pulse duration for an HV cap like that is far from deadly unless you have a heart condition or some other ailment. That's not to say it won't hurt like hell and cause you to knock over your lit propane torch etc etc.
@@sempertard Mmm... potentially 2kv from 1uF... I have a lot of respect for that kind of 'pulse' :)
Me - I may be getting old, but to an extent I like to do what I can to 'idiot-proof' my interactions with the public.
Totally your call though as it's your channel - just making the suggestion.
@@Tassie-Devil I totally agree with everything you just said. I guess I was trying to say that it would not be an instant death penalty unlike grabbing the outputs of a 12KV neon sign transformer. I have gotten bit by CRTs (TV picture tubes) etc. Yeah it hurts!! :)
@@Tassie-Devil Oh.. To this day I refuse to wear any rings or metal watch bands. ;^)
There are bleed resistors built into all the capacitors I've ever pulled out of microwave ovens to help avoid just this issue.
Iv no knowledge of electrics but have become very interested in researching free energy and am finding your videos very interesting and informative. Love how you explain things and you have a good energy when explaining. Really makes it enjoyable to watch,learn and understand. Thankyou for spending your time to do these videos and keep them coming.
😂ITS THE ADS CZcams HAD BEEN RUNNING LATELY ABOUT A HEATER YOU CAN MAKE AT HOME..... DON'T LET THEM WASTE YOUR TIME, 1. FREE ENERGY ISN'T REAL.
2-) ENERGY MORE EFFECIENT OR RELIABLE THAN WHAT YOU HAVE AT THE PLUG, SORRY FRIEND BUT THAT CAN'T BE OBTAINED
When it comes to electronics and indeed electricity I'm a dunce totally ignorant, but I still love watching your videos, so thanks for doing them I dare say I'll learn something useful.
Ya know....one day info. like this could be very handy and in high demand. No, not for cell phones per say...but rather charging batteries for latterns, maybe a transceiver. Thanks Robert, many one day may wish they'd paid closer attention.
Thanks Robert! Loved this one. Would be great to know more about the voltage regulator and whether that can also be hacked or created easily (i.e. without buying something)
I would like to see this as well
What he made probably won’t work. There’s a good chance the voltage regulator he bought will be destroyed sooner or later by voltages above 20-30 volts. It’s expecting to get only 12v from the car. He said he was getting 40v AC or more didn’t he?
Cranking it slowly and/or having a big electrolytic capacitor between the bridge rectifier and the voltage regulator should mostly avoid damaging the volt reg with high voltage.
Hi Robert, I just learned about homopolar generators from watching this videos. The CNC lathe electromagnet could also be used for a standing bench drill piece and shaving holder.
You're awesome man putting things to use and understanding how it might work. I also play with things building different stuff I'm an auto mechanic 40years plus many. Things that people do can make a difference not only for you but many others keep up the great work really enjoy your enthusiasm
Got a Montgomery ward 1.5 cu.ft-700W, after High School in 1976, damn thing won't stop working!👍👍👍👀
A lot of the older appliances last longer because they didn't have electronic controls. When things did go wrong with them, they were easy to fix with parts that were readily available. The old clothes washers and dryers lasted for what seemed like *forever* and when they did quit working, it was often something simple like a drive belt that needed replacing. The same can't be said for the new units with the electronic controls. The controller board is often the part the goes bad and the cost of a new board is probably as much as the unit is worth, so people just throw them away and buy a new one. The same goes for refrigerators these days. I have a small refrigerator (about 30" tall) that I had while living in the dorms in grad school and it just has mechanical controls (i.e. doesn't even have an auto-defrost). After a few decades, that thing is still working as good as new and I still use it to keep beer cool in my workshop. There has been quite a few cans of beer that have made their way through that refrigerator -- not much else though. :)
@@CurmudgeonExtraordinaire It's also because appliance manufacturers hadn't caught on to built in obsolescence at the time. I remember reading an article about John Deere tractors almost going belly up because they lasted too long. Taking a look at automotive industry, 10~12 years seemed OK for agricultural equipment with repairs becoming more common and more expensive after that
Good learning material. If I had the opportunity, I'd spend hours at your place to pick up those skills. Keep the videos coming.
Jayhere me too , wouldn’t it be lovely to be so knowledgeable. lovely voice too .
Thanks...very neat stuff. you are a man after my own heart! I love it. I have torn apart about 7 Microwaves and threw everything away except the transformers that I use for Fractal Burning and the big magnets...........Cheers, Jim Jakosh
I made a rotating powerhead for my saltwater aquarium. Used the turntable motor w/ PWM circuit and swing arm linkage with a cam on the shaft mounted to the pump head. It worked great ! Now they make and sell them everywhere !
"There's the high-voltage capacitor right there"...ZZZAAAP!!!! 3:16 lol
My favorite is cut the high-voltage winding out of the transformer and wind 4 turns of heavy gauge insulated wire through it, making it produce 2 volts at massive amps for use as a spot welder.
what gauge
cool... I believe I speak for others in that we need more detail.
Can't remember the gauge, there's a CZcams video tutorial, I'll find it and post the link here.
Hi, just been introduced to your channel with this episode. I am a firm believer if it has stopped working, try and fix it, if not possible save the parts. I have literally lots of circuit boards stuffed full of components and they do come in very useful. Along with an old pencil case with all the screw, washers and nuts from electrical items. I have made a car alarm for use during this lockdown running off a power bank. Car battery has an isolator on neg terminal to keep it from discharging. Shall enjoy watching your vlogs.
Just love that combination of stuff around the drill press. Function Generator - turned on, Copper and PVC Pipes, Calculator and a Syringe! Hahaha. I like this guy. We share a similar brain.
I love the amount of space you have to spread out. My own workshop is also full of electronics, industrial arts tools and lots of raw materials. It is much more cramped and cluttered, but also includes chemicals and glassware!
Thanks very much for the great applications for some of your salvaged parts. I am forever taking apart VCR's, Copiers, Microwaves, etc. But actually coming up with something practical to do with the parts is a bit of a challenge for me sometimes. Your videos provide a lot in inspiration and ideas. Count me as a subscriber.
This is what the young generation missing.
Back in time our generation was more crafty anything we find we play used.
Old prams used for racing down on the hill old bikes welded extended together.
Old electron valve TVs fixed or salvaged for other projects etc.
It was so fun as many children’s didn’t have high tech games or toys so the entertainment started always by our imagination.
The transformer weld can be broken by tapping with a hammer .I have scrapped hundreds of those for the copper .
Ha ha when I saw you sitting in the circle like that , I pictured this is how we’ll get our phones charged ‘post apocalypse’
For me , like an induction motor, I see a microwave as as much an education device because as one learns more you can keep going back to it and finding more things.
Great vid.
cheers mate - and to my mind it's all about learning and sparking creativity
Laughed out loud at the "it's your own fault" line - brilliant! Many decades ago when I was in an A Level Physics class our teacher was showing us an inductor circuit, pointing at different bits and suddenly he yelps out loud and gets thrown back against the wall as he got a shock. You can imagine there wasn't a single teenage lad in the room that didn't piss himself laughing.
Right on sir. I love taking old microwaves apart. I built a "carbon arc Welder" from a M.O.T. I used the plate motor on my outdoor lighthouse to turn an old food can (with a piece cut out) around the light. It looks like the light is rotating at night (it has been running non-stop for about 6 years.) Love the videos. Peace
that is awesome mate and you have just given me an idea - cheers!
People here use them to slowly rotate home made and wound fishing rods while they apply epoxy over the hand wound decorative nylon on the rods this keeping the epoxy evenly dispersed until solid.
Rob please please take great care with that magnetron ! !
Kev
Yes there is some nasty materials if you broke it ant inhale some dust
@@mindaugaskazlauskas5530 there is?
@@Justin-bd2dg .....beryllium
Wow ok that I didn't know thanks
people say this stuff mate - most of the time it's just fake news or misunderstood reports and when you look into it you find they spoon fed a load of rats kilos of the stuff and surprise surprise a few died. It does cause beryllium disease but you need to be working with it every day and machining it to create dust - pulling the magnets off is going to do - well - nothing
the music is way too loud when you time-warp
Also, it just doesn't suit the channel in my honest opinion. It's a wee bit cringey.
Yeah, had headphones on and microwaved my brains when the music started.
Ive found myself humming it when taking stuff apart.. Proper earworm
I just hit the mute button at that point and speed it up
Indeed it is. Break music should never be greater than accumulative average sum of the narration proceeding it. And should be -50% db of it!
This dude gets so excited about things ..
Enjoyed the video very much and your excitement made it that much better. Think I will go see what other videos you have 👍👍👍👍👍
Just discovered your channel, I love the no nonsense northern approach you advocate but that's not the reason why i stayed, I noticed right away your heavily tannin stained mug on the bench, the mark of a true engineer! subscribed immediately😃
When you're on quarantine and you you're so bored that you start taking everything in your house apart... xD
lol - it's putting it all back together that is the challenge lol
@Fone Zombie Really? This story is even cheaper than the politics-show, the biggest story is the story of god which brought property and slavery with it, but still not sure if the story of god is bigger than the story of money, the value of colored paper and old metal which makes people massmurder the own species, around 6.5 billion in the last around 4-5 thousands years. The corona story is just another try to rescue the monetary system, two wold wars, growing humanity to mindless consumers, oveproduction and planned obslescence, destroying the planet within a couple of decades, nothing helped so far to make this system work for longer than 20-30 years, but it is just not possible, because nothing is endless, but money is very important, because it makes theft and corruption ways easier and the true scum powerful and important, while it makes the rest of life to cattle for the scum, the dirt on the surface of the mass. The dead will follow afterwards through vaccines and a global "depression", when the system gets another reset.
@@ThinkingandTinkering DOH! I forgot that there was a step #2.
Sasha Z I was collecting these a few years before this just for the transformers and other bits, of use
@@Wilson84KS Well, we have to keep the system cranking; this cov19 was just a temporary spike in the wheel.
Normal broadcasting will resume shortly.
Is there a way to make one of these little Motors variable speed? I would like to make a small turntable. Thanks
Use a variable control resistor , potentiometer it may be known as. Let less or more voltage in and amperage through by turning the knob
Clearly an Electrical Engineer I think . Masquerading as a Mad Scientist . Lots of good little projects come out of this page .
WOW, if you were in a MAG prepping group you would be THE MOST valuable member because you’re not only clever, but inquisitive & resourceful as well‼️
Just one thing with the videos. The 'speedup sections music' is much louder than your voice. I turn it up to hear what you're saying then have to jump for the volume when those sections hit.
It does give me a little exercise though.
Sorry about that - I'll mute it down next time
Robert Murray-Smith thank you Sir!! Other than the volume difference, I really love your videos and am learning a lot and appreciate you making them.
John Morrison Yes I have to agree .... Pretty intense to say the least
Currently watching this at 0141 in the morning. The music was rather startling HAAHH!!!
@@thomastallis7245 Same here just after midnight and woke all the family up and they are still calling me an idiot .. No noise or what people call music is better
Hey Robert, I noticed the international shortage of PPE especially when using the angle grinder.
Looking forward to your next video. Keep safe - Andy.
Ooh, that made me wince. I enjoy a bit of recklessness, but I've been near too many exploding discs to not wear gogs with a grinder. Eek.
folks are far too worried about their own safety mate - if I hurt myself I have only one person to blame - me lol
35 years working with these things - never an exploding disk - what on earth are you doing with them? don't you check them for wear before using them?
@@ThinkingandTinkering I know loads of guys that don't wear goggles. Your choice, as you say, just nor for me. I'll happily handle acid without gloves, but not grind without goggles. Using .8mm slitter discs and user error caused by lack of concentration is the only time I've had them explode. My fault entirely, but unpleasant all the same.
@@ThinkingandTinkering may be. but others may suffer too, imagine you're hurt, your family is depending on you. what now? If you've got family, that is.. ;)
Really ... All that ... I don't think no one will spend 2 or 3 hours + to crank and charge a phone .... BUT your enthusiasm and smile explains everything things... I'm glad you are happy ☺️😁
I thought you were going to make a wireless nuke charger
Excellent presentation...enjoyed the information-packed
Graphene scientists discovers hand powered induction generation and exudes in bliss.
lol - it's the little things mate
@@ThinkingandTinkering I know, I was mostly joking. I still remember the first time I powered an LED... I hope you do well with the flash graphene experiment
@@johanponin1360 cheers mate
@@ThinkingandTinkering Hey, since I had lots of MWO parts lying and nice rectifier ICs I finally made your handcrank generator ! hand powered light, so cool.
ps: can't wait for the flash joule graphene experiment (I stashed all them HV capacitors just for this)
Great video! You are mad as a hatter sir, but that's how great inventions happen, people tinkering in their basements or garages.
Not close enough to see wtf is happening!!!
Love your videos , cool projects and always make laugh, very cool , seems to me we need more people and videos like you and yours these days , thank you very much for the bit of happiness !
A true MacGyver greatly appreciated the video.
Thank you
Yes it was rice university that did flash graphene. At About 400v zap 7.2 kilojoules per gram over 200 milliseconds i think. Thats a lot of energy and i think to do the same 1 with gram at 400 volts you are going to need about 0.1 farads.
A typical microwave High Voltage Capacitor, 2100 VAC, .85 uF is orders of magnetude too small for 1 gram of graphene.
I wonder how much capacitance one can get with a capacitor made with aluminum sheets between the pages of an oil soaked phone book. That should be able to store 400v. Who uses them these days? Upcycled phone book. 😁
.........the phone book is a good suggestion. Oddly enough Robert has already exceeded the capacitor performance required in a now 7 year old video . He experimentally constructed a bopet sheet a4 size dielectric graphene plate capacitor with impressive performance. 400 volts is nothing for bopet sheets...
..caution.
......oh, don't forget that if the microwave capacitors were charged to a scary 2000 volts that their energy dumped would be 25 times greater than at 400 volts , but they'll happily tolerate 3000 volts meaning 50 times more energy dumped. If using a mechanical contactor switch for discharge then hearing protection is essential. It really needs a suitable hard to obtain semiconductor scr or triac trigger cos about 50% of energy is lost vaporising the mechanical switch if used ....it's a heluva lot of amps in a millisecond ; I wonder if it would produce a short range emp pulse strong enough to fry a smartphone nearby ?
nice idea mate - that got the wheels turning
@@ThinkingandTinkering By that one must conclude that Robert will be driving around looking for his next haul... ...when I think about all the electronics that end up at the Council Dump and loading into containers it sickens me.
@@stoatrepublic ...and they get pulled apart by some poor children in a tip in Bangladesh.! Who roast the bits over open fires and breathe in the fumes. Still, the west did all those things decades ago, and lost a few souls in the process. Life is/was cheap. Progress.?
If the protection diode fails (and they do! replaced lots) the capacitor stores a charge of 2500v at 10 amps, thats not a 'ouch that hurts' like mains voltage does (and could kill you), thats a 'your dead' guaranteed, and that capacitor can stay charged for weeks. The microwave is called the most deadly electrical appliance in your house for a reason! Don't just rip a microwave apart without ALWAYS discharging the capacitors first! You'r just a fool asking for death if you dont... Also Magnetrons contain Thorium which is radioactive and causes cancer, never crack the ceramic ring (pink /blue or white colour usually) at the end of the Magnetron...
the cap has an internal discharge resistor , never had one hold a charge and maybe only 1000 volts at 1 amp . the insulators are beryllium and pose no issues unless you grind them
Been following you for a while now, love your work on the Graphene batteries and capacitors.
cheers mate
I've wound Transformers for 40 years. Take that small transformer put it in your oven at 250 degrees, let it sit for about an hour while it's still hot those coils should push out a whole lot easier it will not catch fire, that's if your welds is still holding the E part of the lamination together. If there's nothing holding that lamination together, the varnish will break loose and it will all fall apart. I have taken laminations apart and put it back together it is a challenge. But always have room to learn something. And I do like your videos very interesting
Be careful of the beryllium mate
If You dont cut it and breath the dust its safe
I wouldn't even touch it.
Magnetrons can contain beryllium which is highly toxic if breathed in.
only if you cut them and breath the dust
@@mottthehoople693 Can you tell me where the beryllium is in ,so I can avoid it .(want to get the transformer outof a Micrco )
@@tianharvan it's the purple ceramic ring around the tip of the magnetron.
I like your editing where I don't have to watch you do....every.....little....thing. You say take it apart like this and "POOF" it's apart. Thank you for that.
You make me smile. Excellent, entertaining videos.
As most of us know that microwave capacitor is deadly fully charged. Having taken a number of microwaves apart you can clearly see the large diode attached to the capacitor with its direction of current away from the capacitor and with its farther wired into the ground of the microwave (which then directs the charge from the capacitor into the house ground and then into the dirt in your backyard).
Essentially, if the microwave was turned off first (stopping the active charging of the capacitor), and then unplugged (giving time for the capacitor charge to leave the capacitor, via the diode, and find its way through the house grounding system via the microwave plug), there won't be any charge in the capacitor if everything does its job right. Still...there's always that chance that things didn't go right so short-circuit the capacitor anyway. But, don't be surprised if nothing happens.
I short the caps every time, I never trust the diodes.
I quite watching when he started grinding with no eye pro.........not the brightest crayon in the box
You are amazing Good Sir. I’m hooked on your videos. Your Knowledge base is incredible, keep up the good work. Fantastic to watch and listen to👍👍👍
Good lord man you are getting 450 thousand views now! How far you have come. Well done. I have enjoyed watching and supporting you over the years.