Lure Making Mikro Crankbait | Same Day Build to Catch ® 🎣
Vložit
- čas přidán 16. 07. 2021
- In this lure making tutorial, I'm doing Same Day build to catch mikro crankbait out of balsa wood 😉 28mm or 1" floating crankbait perfekt for panfish or in my case perch and chub fishing 😁 This time I'm going again for the mirror finish and after learning from previous mistakes it turned out perfect 👌 The video includes fishing session were I caught decent amount of perch 😁 Enjoy
- Jak na to + styl
Nice work, I started making lures a while back and they are starting to come out better than ever and when you have someone showing you how to build it it's just so much easier. Thx love your vids
Thank you 😊 that's what this channel is for 😉 to teach some tricks, to show some new technics and to inspire another lure makers 😉
@@SuchaJerkCustomLures Can I ask what wood you use to make your small crankbait and doe's it float or slow sink thanks hope you can help.
@@derekirelandsirsmokepotalo1152 here I'm using balsa wood 😉 since I wanted floating lure - this wood is soft and very buoyant - so perfect for small floating crankbait 👌
My made lures is as good as Rapala or other big brands, i cant catch on any of them 😅
@@Svendrys sure thing 👍 if you get them to swim right they're be as successful as the mainstream brands, but the satisfaction from catching on them will be way bigger 😊 I fish exclusively the lures I made 👌
Love it, Been Building lures for a year now. But i still find it pretty hard to build small lures, Loved your Video
Thank you 😊 for me is way easier to build the small ones out of balsa, compare to the big one from hardwood, due to fakt I don't own power tools 😉
Amazing. That viral minnow looked awesome as well.
Thank you 😊 the viral minnow it's a awsome lure with great potential for fishing in clear water, also would work great in the ocean I believe 🤔 I must make few more before the summer ends 😉
That crank really looks amazing. Awesome job !!
Thank you ☺️ I'm happy you liked y 😁
wow,so beautiful colour crankbait.👍👍
Thank you 😊 I like the effect as well - need to buy some different colour powders 👌
Awesome man, lm loving that powder coat 😁👌👍🎣
Thank you 🙂 yes, this time.the powder did the trick 😉
Прекрасное видео как всегда. Если нет бальсы, то можно использовать интересный заменитель, я нашел на берегу моря плавник и решил попробовать как он будет в качестве материала для воблеров. К моему удивлению это был супер материал, легкий, пористый и удобный в работе. Желательно брать старый просоленый и ветки не особо толстые. Думаю плавник с балтики будет не хуже черноморского. Удачи
Interesting 🤔 I could try to find one in the sea shore and made sea fishing lure out of it 😄 that would be 👍
Great job!!!
Thank you 😊 I'm happy you liked it 🙂
excellent work friend.. here in brazil/rio de janeiro I'm loving fishing with micro baits..your video serves as an incentive for me to make my baits...congratulations.
Thank you 😊 I'm happy to hear that 😊 give it a go, nothing beats satisfaction from catching fish on the lure you've made by yourself 👌
Отличная работа 👍 Рыба её тоже оценила. Молодец
спасибо 😊 Я рада, что вам понравилось видео 😉 окунь маленький, но все равно приятно ловить 👌 вчера на том же месте я поймал 35-сантиметрового окуня на приманку WTD
Wow 🤩 amazing. Thx 4 Sharing
You're welcome 😁 I'm happy you liked it 🙂
Estoy viendo todo tu 👍👍👍👍🎣
Gracias ☺️🙏🎣👋
Nice job!
Thank you Scott 🙂
Cara membuat lure untuk mancing casting. Salam satu hoby kawan. Kreasinya mantab abis...
terima kasih 😊 jika Anda juga suka membuat lure, Anda bisa mencoba membuat yang ini 👌
Fajny Super!!!! Pozdr. z Szczecinka👍👍👍
Dzięki 🙂 piona z Wrocławia 👋
Awesome little lure mate...you have convinced me to buy UV resin. That powder coat looked amazing too!
Thank you 😊 just keep in mind in order for the mirror effect powder to work it need to be applied specifically on "top coat no wipe" nail UV resin - it wouldn't do the right effect on the normal UV resin - once you have the mirror effect done you can clear coat with resin of your choice 😉
@@SuchaJerkCustomLures I have used 5 min epoxy for top coat and worked OK but don't have to much experience. Did U tried 5 min epoxy and any pros and cons?
@@goran79kt pros: you can fish the lure already same day 😉 cones: not as durable as 30min/12h epoxy, will yellow on the lure rather fast - which will ruin the looks, very short working window to clear coat the lures(no chance to clear multiple lures at the same time) I did use it once in emergency situation, but in general I prefer regular long curing epoxy, or lately big fan of the UV resin - you can also make and fish the lure on the same day 😉
@@SuchaJerkCustomLures till now 5 min epoxy did turn yellow. I have purchased boat varnish which turned yellowish when cured. Regarding endurance, there is a lot of snags here so basically I lose it before it gets damaged 😎 Managed to break down a lip but 5 min epoxy remained OK. Tnx for the tips!
dokładnie tak to powienno wygldać podstawowe narzędzia, a nie żadne cudowanie ze sprzętem za 10k pln +, świetna robota, ja przy najbliższej okazji kupuje dremela i też się bawie, pozdrawiam :) ps pijemy to samo piwko :D
Lepszy sprzęt ułatwia i przyspiesza proces 😉 ale i bez niego można uzyskać taką samą jakość 👌 ja chyba też dremela zamówię na zbliżające się urodziny 🙂
I really like the content you are making keep it up
Thank you 🙂 I'm not planning to stop any time soon 😉
@@SuchaJerkCustomLures that’s very nice to hear
The lure looks great.
You can't see the action of either lure, because they're far too small on screen and submerged.
Nice
Thank you Chris :)
Hi, thanks for your videos. I’m a decent woodworker and a decent angler and I may give it a try. I’m learning a lot from your videos, but have million questions, have you ever planned on making a video on tools and materials? I.e. what type of transparent coating is needed? What paste do you use to close the weight hole? What type of colors do you use? I’m sorry, too many questions 🤣
After digging a bit more into your channel I found 3 tutorial videos which covers most of my questions! It would be very helpful at this point if you could an Amazon store, easy for us to see the right product and you also make some money of of it..
@@lucapelati I was thinking about this Amazon idea, need to look into it to see how it actually works 😉 for all the detailed technical questions you can always ask in the comment section 😉 or I also suggest this Facebook group - huge amount of very experienced luremakers, always ready to answer novice questions 👌
facebook.com/groups/320429427999060/?ref=share
@@SuchaJerkCustomLures thank you so much!
Awesome job!
I have a question: why tungsten instead of lead?
Regards
Thank you 😌 so tungsten ball of the same weight will have smaller diameter, so it will sit lower in the lure body and that equals more stable action 🙂 of course it still will work with lead instead 👌it's just that little extra that can improve on the lure performance, so why not 😉
Mantaaappp
Terima kasih kaka 🙏🤙
🙏its good Mr 👍👍🙏
It came out very nice... but it was made shallow runner for shallow river chub fishing - obviously the river was flooded, again... So I went for alternative perch fishing 😉
Yellow perch good fighting fish we have them in a private lake here in Missouri
Yes they are - very strong for they're size 👌 a week later in same spot I got 14" over one pound on top water WTD 🥳
@@SuchaJerkCustomLures what the heck biggest ive gotten so far was about a foot . Do you eat them?
@@phile1550 no always catch and release 😉 perch need to grow over 10years to reach one foot...
@@SuchaJerkCustomLures absolutely agree 🤙 you up north?
@@phile1550 no if you mean USA... and those aren't actually yellow perches. Those are European Perch and I'm living in Poland 😉
I should get some nail painting gear and practice on my daughters nails 😂 all jokes aside, that's probably not a bad idea 😆
Sure is not 😉 just buy her as a Christmas gift and than take.it whenever you need it for lure making 😅
@@SuchaJerkCustomLures That's even better 😂
Looks like Sweden.. 😊
It is in Poland 👀 but you're the second person that mentioned that 😉 however if it would be Sweden the perches would be three times the size 😅 I remember once on holiday in Karlsborg we were fishing with my girlfriend we caught plenty of perch from 25cm up to her PB 39cm 1kg ☺️
@@SuchaJerkCustomLures holy cow. My perch pb is like 700g. Good job!
May I ask how you cut circuit board lip. I do with scissors and sand file, but takes too much time. Thanks
If I need specific custom shape I use copy jig saw and file and sandpaper - indeed long version - you can check in this video: czcams.com/video/opbgmXGonAs/video.html
However my most popular lip shapes I order cutted to my specifics on CNC machine 😉
เยี่ยมครับ
ขอบคุณครับพี่🙏
Dobra robota :)
Dzięki 🙂 widzę zaczynasz od najpopularniejszych 😉
@@SuchaJerkCustomLures tak jakoś YT podpowiedział, zaintrygowała nazwa.. patrze a tu ktos z pl ;)
Swietny film wlasnie zasubskrybowalem kanal.jaka czarna farbe uzywasz moze byc akrylowa?czy czarny lakier do paznokci?
Dzięki za suba 🙂 tutaj akurat zapomniałem wcisnąć nagrywania (normalnie pokazuje farbki) czarna akrylowa ( można aerografem, ale ja pomalowałem pędzelkiem by nie musieć czyścić aero)
Mantap 👍👍👍👍👍
Buena muestra 🙏
Muchas gracias ☺️
Love it! I make lures myself too and I know how much it hurts to lose a lure (big or small) that you have made and not just bought. I'm also from Poland.
Just wondering if superglue works well for wire eyelets and lips glue-ups. I thought superglue it might be too weak/unreliable for that. That's why I've been using epoxy resin for eyelets and lips. Is superglue strong enough for those glue-ups in your experience? Thanks
In my opinion super glue is stronger than 5mon epoxy, probably less than long cure epoxy. Using it for the lip glueing and never had any issue, that being said, I do not use acrylic/plexiglass and I've heard it make it brittle. Screw on eyes I almost never use, the only time I did it was in my glide bait lure, but than I used epoxy. Mainly I use it to seal/strengthen balsa wood, after layer of super glue is incredibly tough !!
Love your videos. Let me ask...does it make you want to cry if you snag and lose a lure? Hahah...I would after making that
Thanks mate 😊 well in case of snagging, sometimes yes 😋as was the case with that lure: czcams.com/video/eqKqW4NSPxY/video.html
I snagged it on the three in the 5th cast and I was really upset because it was labor intensive lure with special finish 😓 In case of the "viral minnow" of course it was replica already - the original after going viral on CZcams was straight away put on the wall of fame and never fished 😉 so loosing the replica is not a big deal, as at any time I can recreate it 😊 I also have the rule once I caught new PB on some lure it also goes on the wall of fame with fish picture and I will recreate it to fish with the replica 😉 those are the perks of being lure maker 🥰
I really like that powder would you mind sharing more information what that mirror magic powder is never heard of it
No secrets on this channel Mr 😉 You need to look in nail art section for "mirror finish" many different colours available. However keep in mind it will only give you the desired effect once applied over UV nail resin "top coat no wipe" 😉
@@SuchaJerkCustomLures Thanks Will check it out
@@SuchaJerkCustomLures ใใๆ
Great video! This guy really knows his lures! Any chance to send a wtd to China?
Thank you ☺️ unfortunately I'm not selling my lures... Just not enough time between my day job, family, fishing and making lures on You Tube 😪 please subscribe to the channel if I will start selling them for sure I will mention it in my videos 😉
@@SuchaJerkCustomLures thanks for the answer. I already subscribed of course
Cześć jakiej grubości balsy używasz i jakiej grubości drutu na stelaż i jeszcze jak można wiedzieć ile waży ta kulka na dociążenie ?
Tutaj w związku z tym, że grubasek to 2x 7mm, drut najcieńszy jaki posiadam 0.5mm a kulka z wolframu ma 4mm i waży 0.6g 😉
Красиво) Лайк)))👍👍👍
спасибо 🙏 я рада, что вам понравилось 🙂
отличная работа. больше uv лаком пользуешся?
спасибо 🙂 в последнее время я использую больше УФ-лака, когда хочу сэкономить свое время, или когда я хочу использовать зеркальный эффект - в этом случае УФ-лак для ногтей является обязательным 😉
That bronze powder looks insane. Mind sharing what it is? 😊
That is called "mirror effect powder" it's normally used for the nails decoration - available in many different colours - one important note it must be apply on top of "too coat no wipe" UV nail polish 🙂
@@SuchaJerkCustomLures awesome. It really looks like magic. 😁👍🏻👍🏻
👍
あなたのチャンネルに興味深いコンテンツがあります😉私の動画に興味を持ってくれてありがとう🙂ポーランドからの最高のすべて👋
You mention that you can no longer get balsa in Poland. Would you like me and/or other followers to send you some, or is the shortage temporary?
Thank you for the offer Chris 😊 I'm afraid it may not be temporary, it's ongoing for few months already and the shop owner says none of the main suppliers has it 😟 so I would kindly accept your generous offer, please contact me at rafaltheluremaker@gmail.com 😉
💗👍
🙂🙏👋🎣
Why balsa?? Seems super soft and not real durable, Can I use Aussie hardwoods instead ?? Cos that's where I am and what I have at hand
I don't see why not 😉 I choo balsa because of the bouyancy - you can place relatively big weight to make the lure stable in the current 😉 also to shape 1" crank of hard wood might be dangerous for the fingers and also keep in mind to put less weight 👌
I still have a lot of balsa for my airplanes😉
Good for you 🙂 I received today nice package from my subscriber Chris 😊 will last me at least two years 🥰
What was that powder
Hi, it's called the "magic powder mirror effect", it's a powder for 💅 art, you can buy it in nail art salons, or online. Important is that you will buy the "top coat no wipe" type of nail UV gel, otherwise it will look like regular glitter instead of giving the reflective effect 😉
Pełna profeska💪 a te „złotko” to co za materiał? Piona
Taki pyłek - napisz sobie "efekt lustra" na Allegro i szukaj w zdobienie paznokci 😉 warto przeglądać tą kategorie bo jest dużo fajnych rzeczy na woblery 😅 piona 👊
@@SuchaJerkCustomLures dopiero zaczynam amatorsko wykonywać wobki lecz z lipy. Jestem na etapie farb akrylowych wiec pełna amatorka. Niemniej jednak oglądając Twoje filmy wyciągnę jakieś metody, sposoby itp. Spoko ze odpisujesz czym je wykonujesz. Salmo powinno się uczyć od Ciebie 😜🤛🥃
@@Hm.Fishing167 do poziomu Piotra Piskorskiego jeszcze mi bardzo daleko (jak polubił mój filmik na grupie to jarałem się jak dziecko) Powiem tak metody zdobienia wobków materiałami do paznokci, mogą na początek, być fajna alternatywa kupna aerografu 😉
Wood?
Balsa
Can you tell me the name of the lip plastic?

Hi, it's glass fiber and epoxy laminate, called FR4 😉 I'm using 1mm thickness
@@SuchaJerkCustomLures tq for your reply🤪
Hi. Where u buy magic powder? :)
Check with your local drug dealer 😅 jokes aside - it is called mirror effect powder and you need to look in nail art section of your eBay/Amazon/AliExpress 😉
@@SuchaJerkCustomLures Thank you. Nice work ;)
Классно 👍Ок
Спасибо 🙏🙂
Пожалуйста 🙂
where can i buy that powder
Any shop with nail 💅 decorative accessories, important that you'll also buy this specific "top coat no wipe" cause it wouldn't have the mirror effect on top of any other UV resin)nail polish 😉
will it work on normal uv resin@@SuchaJerkCustomLures
@@blinddoglures it will work, but it will not be shinny, but more like frosty look, like you would add glitter into the epoxy
Could you please make a how to version of this?
What do you mean by "how to version" ? All the steps are shown one by one in this video - the only mandatory thing is that you will use "top coat no wipe" UV nail polish before applying the mirror powder 😉 and as the powder is concerned just look up online "mirror effect powder" in the nail art section 😉
@@SuchaJerkCustomLures I mean you make something a bit more like what you did in the video of the beginners minnow. And before i forget, what thickness is the balsa sheet you used.
@@jarivandermaarl8700 on this occasion I used 2 layers of 7mm balsa 😉
Är detta någonstans i svergie?
Nej Christoffer, det är i Polen 😉 om det skulle vara i Sverige skulle abborrarna vara tre gånger större 😁 Jag minns att jag fiskade i någon kanal i Karlsborg på min semester minsta abborre var 25 cm och största för min flickvän 39 cm😌
@@SuchaJerkCustomLures okej 😂😂 vill bara säga att det var riktigt kul o se tillverkningen av betet och att du har en ny subscriber
@@chrkar86 Jag är glad att du gillade det 🙂 och välkommen ombord 👋
Привет.. Ростова на Дону. В Польшу.. благодарю за внимание классное видео удачу... зачёт...с кого материла из готавлеваеш
спасибо мой друг Привет из Вроцлава 👋
Из бальзы
Who can i buy those showels?
They're not commercially available, I'm buying the material separate and have them CNC cut to my specifics 😉
@@SuchaJerkCustomLures Oouu…ok, i need a CNC cut 😂
@@SuchaJerkCustomLures or maybe i can buy it from you?
@@malawihood4100 Were are you based??
@@SuchaJerkCustomLures in Germany. But i think its difficult
Plis Vobler Rak 🦀
I'm planning that, but for next week is special episode to celebrate 10k subscribers 👌 so the lure is already decided - but crayfish wobbler definitely will come soon 😉
Good👌
That second fish is 100% dead now. Poor guy got caught in the gills
There is a chance for that... it swim off fine, but you never now. Not much you can do about it, now and than it will happen for sure 😟
Did you know balsa is actually a hardwood
🤔 No clue, however this batch was rather hard for balsa standards 😉 the big issue is for whatever reason is not avaliable in Poland from few months already... No distributors have it... I still have decent stash 😉 but I hope it will be avaliable soon enough...
@@SuchaJerkCustomLures wood is not classified by how hard they are but what the grain structure is and how the tree it comes from looks
Coniferous and Deciduous. Cone shaped (think pine trees)
Deciduous (broad leaves like maple leafs or oak leafs)
Coniferous are classified as softwood
Deciduous are classified as hardwood
There may be exceptions, but rare outliers.
1:09 One day! everyone who knows whats up like or comment
Not to copy from Nate I changed mine to "Same Day Build to Catch ®🎣" 😉 but the concept is awesome and challenging for every lure maker - the guy is a genius 🥰
"SAME Day Build to Catch®" eh? 🤔
Yep, no point to copy from Nate 😉
@@SuchaJerkCustomLures what's your main game fish over in Poland? I'm assuming you don't get many largemouth bass.
@@bubbleheadft no large mouth 😢 mainly Perch, Zander (European walleye) and Asp (like fresh water mini Tarpon 😜) and pike - but I don't target them because they're rare in my area. We also have native brown trout and stockie rainbows, but I need to travel around 100miles for them 😉
@@SuchaJerkCustomLures that's a nice variety! Perch seem like fun to catch but unfortunately we don't have many here in Tennessee. Maybe some day I can head up north to find some.
Anyway, your lures look great, keep up the good work!
*micro.
Micro indeed 😉 thank you for pointing it out - but now better not amend it, as it may messed up the algorithm...
hey friend you want to send me your baits. willing to pay you. good luck
Hi 👋 Actually for now I'm not selling my lures... Just not enough time between my day job, family, fishing and making lures for You Tube 😪 please subscribe to the channel if I will start selling them for sure I will mention it in my video 😉
Wydawalo mi sie że to kanał jakiegoś typa z USA a nie dosc że to Polak to jeszcze łowi tam gdzie ja, niezle odkrycie
Hahaha, pozwolisz, że zacytuję moja ulubiona polska komedie "A co Ty myślałeś, że Polak nie może się na świecie wybić..." 😜
@@SuchaJerkCustomLures
Bardzo dobra robota hehe pozdrawiam
@@JanKowalski-rc5xc dzięki i również pozdro 🤙