How to change to a MTKT Undertray on a Speedfight
Vložit
- čas přidán 20. 08. 2024
- MTKT - Bakre Underkåpa (Speedfight2) www.twostroke.s...
Great for cover for your Speedfight2!
Description:
Really delicious in the hood that gives your Speedfight2 a unique style!
The casing is made of ABS plastic.
Fits backlight
NOTE: The hood is attached in the same way as the original cover.
Comes with a few longer screws and spacers that replace the original screws to backlight.(Abutments have a length of 30mm and an outer diameter of 10mm)
-------------------------------------------------- -------------------------------------------------- -------
Here is a description on how to assemble a MTKT rear cover.
1st You start by assembling the mudguard from the moped, and unplugging flasher
2nd Since when is the so screw the cap that sits along the saddle. After the screw and disconnect the entire backlight.
3rd You got a box of accessories for the hood and in the lies screws with spacers.
4th Now that the cover is, you take the spacers and screws, and draws on backlight. with them. This allows the lamp to move any farther, so that the cap can sit on.
5th Now sit backlight. on and attaching the hood in the same place from the beginning.
6th flasher can be attached as one wants, one option is to drill a hole in the hood and disconnect the cables in the old blinker wires. There is a coil bolted to the frame, so if you turn it off and attach it with stripes in the further up you'll see that the cover fits perfectly when you attach it as it should sit.
7th Now take undertray and stuck behind the cover along with the saddle. If not positioned properly yet so pick up a flat screwdriver and remove the cover along the saddle and press down so the tape out. NOTE. PRESSURE VERY GENTLY (CAUTION).
8th Now, take the screws that will fit a flat head screwdriver and screw the cap so it sits. You saw it came with a foam with a sharp piece of tape on it, attach the upside back to the lamp. adhesive must be at upside This makes the lamp is pressed against the hood of the tracks.
How long are these spacers? I don't have mine so my light is kinda free-flowing
can anyone help me where i can get the spacers for the rear light for the mtkt undertray
thanks for the video man, there's only one thing i need to know. i got a liquid cooled, two stroked speedfight 2, are there any differences / what speedfight did you use for the video?
how long are those spacers?
Who can send me a link or tell me were i can buy the undertray from
Here sir, www.scooter-attack.com/shop/#!/en/Peugeot/Speedfight-2-50-AC-air/Fairing-Parts/MTKT/ADURCHMTKTSPEEDY2-MTKT-Undertray-2008.html
I have a speedfight 2 special edition and the light at the back is longer than the plastic..(about 2cm)...if i put this undertray will it fit?
where do you get the backlight with built in indicators? and also are there built in indicators in the lexus ce approved tail light?
Does someone know how to install speedfight 2 rear spoiler?
Hello, which screws you have taken for the untertray?
were can i get the undertray from? also... were do u put the numberplate
hade du ingen transport ögla?
hmm the english version.. Great tutorial!!!
Alrite bud were did u get tht undertray and whos it made by?
were can i get the undertray from?
led slingan i under kåpan vid 4.12 kan du länka dom eller
www.twostroke.se/product.asp?product=12371
***** tack kan du göra en video hur man installerar dom men du behöver inte om du inte vill
Andreas Jernström finns redan
Aha länka eller ;)
***** hittar en inte videon
Vet du vart man kan köpa en sådan fast till speedfight 1?
Thx very helpfull
Ska skumkudden sitta kvar när man har tryck till baklyset? :)
hi do u no where i can find a uk dealer for this
Where i can buy the undertray? Please you can give me the link?
Camt buy them anymore they stopped making them
@@kbikelife ok,thank you 👍
Is this video useable for the speedfight 3 darkside?
bis long are the sleeves?
how long are the sleeves?
do you need to take the 2 stroke oil tank out ??
No
Where do u put number plate
Skingirl for Life you get a new holder and screw it in
Yeah looks good where's the number plate not road legal LMAO 😂😂😂
how do you work the indicators?
Build in in a led light