Avoid These Resin Mistakes!
Vložit
- čas přidán 17. 06. 2024
- Hi Everyone. It is important to ensure that you are using the correct resin for the project you are making. The Tips and Tricks in this video will save you from wasting resin and having disappointing projects. I go through when you should use an art resin, casting resin, slow cure resin, and many others, including examples and tips and tricks.
🎥 BE SURE TO CHECK OUT THIS VIDEO NEXT on how to make your own words from resin to save money on moulds: • Can YOU make your own ...
📖 Colouring books available here: stevemcdonaldcrafts.com/
📹 Check out my other Crafting CZcams Channel: / @stevemcdonaldcrafting
📬 If you would like to post something to me, please use:
PO Box 277, Newmarket, CB8 1GY, United Kingdom
👕 Steve McDonald Arts and Crafts merchandise is finally here. / @stevemcdonaldartsandc...
😍 CHANNEL MEMBERSHIP Check out the perks by clicking the JOIN button on the link below. / @stevemcdonaldartsandc...
☕ TO BUY ME A COFFEE. Every contribution is very much appreciated and allows me to keep making regular videos. www.paypal.com/paypalme/SMcDo...
✍ My WEBSITE, available here: stevemcdonaldcrafts.com/
💻 As an amazon associate, I earn from qualifying purchases:
(USA👍) Here is my amazon store for the USA: www.amazon.com/shop/stevemcdonaldartsandcrafts
(UK✊) Here is my Amazon Store for the UK: www.amazon.co.uk/shop/stevemcdonaldartsandcrafts
Or see the individual links below for the items used in this video:
LINKS FOR MATERIALS USED FOR THE (USA👍), (UK✊), (Canada👋) and (Australia 🙌) ARE BELOW:
⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇
LINKS FOR USA (USA👍Only)
(USA👍) Art Resin: jdiction.online/?ref=w6l74mbw04
(USA👍) Casting Resin: amzn.to/3B8W32j
(USA👍) Slow Cure (deep cast) Resin: amzn.to/3D98BHO
(USA👍) UV Resin: jdiction.online/?ref=w6l74mbw04
(USA👍) Polyurethane Resin: amzn.to/2YkhuiR
(USA👍) UV Torch: amzn.to/3a4i0Ug
(USA👍) Measuring Jugs: amzn.to/3ouyMV9
(USA👍) Stirring Sticks: amzn.to/2YdV9Tw
(USA👍) Resin Tools: amzn.to/3oq4YsN
(USA👍) 5 Minute Epoxy: amzn.to/2YlCHsK
(USA👍) Gloves: amzn.to/3oIFZ4f
(USA👍) Full Face Mask: amzn.to/3uF73Cm
LINKS FOR UK (UK✊ Only)
(UK✊) Art Resin: resincolour.co.uk/shop/ols/pr...
(UK✊) Casting Resin: resincolour.co.uk/shop/ols/pr...
(UK✊) Slow Cure (deep cast) Resin: resincolour.co.uk/shop/ols/pr...
(UK✊) UV Resin: jdiction.online/?ref=w6l74mbw04
(UK✊) Polyurethane Resin: resincolour.co.uk/shop/ols/pr...
(UK✊) UV Torch: amzn.to/3uAkcMR
(UK✊) Measuring Jugs: amzn.to/2YkZnt6
(UK✊) Stirring Sticks: amzn.to/3itVJUq
(UK✊) Resin Tools: amzn.to/2ZJzqni
(UK✊) 5 Minute Epoxy: amzn.to/2ZUUNSP
(UK✊) Gloves: amzn.to/3B25D7b
(UK✊) Full Face Mask: amzn.to/3orSmkX
LINKS FOR CANADA ONLY (Ca👋 Only)
(Ca👋) Art Resin: jdiction.online/?ref=w6l74mbw04
(Ca👋) Casting Resin: amzn.to/2YeDcoA
(Ca👋) Slow Cure (deep cast) Resin: amzn.to/3FgqdDt
(Ca👋) UV Resin: jdiction.online/?ref=w6l74mbw04
(Ca👋) Polyurethane Resin: amzn.to/2ZSIczA
(Ca👋) UV Torch: amzn.to/3FeW2fB
(Ca👋) Measuring Jugs: amzn.to/3a3vCiQ
(Ca👋) Stirring Sticks: amzn.to/3AcOtmg
(Ca👋) Resin Tools: amzn.to/3D7JLYB
(Ca👋) 5 Minute Epoxy: amzn.to/3A1JrbT
(Ca👋) Gloves: amzn.to/3itWJIa
(Ca👋) Full Face Mask: amzn.to/3ivQbJn
LINKS FOR AUSTRALIA ONLY (Au🙌 Only)
(Au 🙌) Art Resin: amzn.to/3mnMVke
(Au 🙌) Casting Resin: amzn.to/3mnMVke
(Au 🙌) Slow Cure (deep cast) Resin: amzn.to/3itOKex
(Au 🙌) UV Resin: amzn.to/3q5nfeb
(Au 🙌) Polyurethane Resin: amzn.to/2YfQMrn
(Au 🙌) UV Torch: amzn.to/3otWZuB
(Au 🙌) Measuring Jugs: amzn.to/3Be5Q7y
(Au 🙌) Stirring Sticks: amzn.to/3a06PfB
(Au 🙌) Resin Tools: amzn.to/3D7KAAF
(Au 🙌) 5 Minute Epoxy: amzn.to/3FhTw8K
(Au 🙌) Gloves: amzn.to/3DbjUiK
(Au 🙌) Full Face Mask: amzn.to/3Fe33gV
Stop Making These Resin Mistakes Easily!
Important Resin Tips and Tricks to Know Before You Use Resin
Warning: Important Health and Safety Notice:
Resin is an industrial chemical and as such should always be treated with respect and the manufacturers safety advice taken. Here is a video I have made on how I keep myself safe: • Stop Making Yourself I... - Jak na to + styl
Great video! I’ve found something super helpful for me when using PU resin is to weigh out part A and mix all the colorant, glitter, metal powder, etc into that, THEN weigh in part B and do a quicker stir. I find that helps so it can get really thoroughly mixed without wasting precious pot time!
Brilliant!
Great minds think a like, I couldn't be the only one 😎
I’m using it on my bar top. Great to see someone tell the truth about food safe. I didn’t trust it but never heard anyone say this till now. Thank u
I just ordered some EcoPoxy slow cure resin. I'm really hoping it works well, since it's bio-based, sustainable and eco-friendly, which honestly would make me feel a lot better about using resin😅 Fingers crossed!🤞
Such a massive help! Thank you Steve 💗
Really informative, thanks Steve.
Very informative. Thank you.
Thanks so much, Steve. Great information!
Thanks so much for this! Some of these things I knew already but I also learned some new stuff too!
Thank you this was very helpful 😊
Thank you.. always good to have a safty reminder. X
Thank you! As always Steve you have given great information and insight into the differences kinds of resins.
Thank you Steve - a wealth of information presented in a concise manner. Excellent.
Great explanations. Thank you so much
Thanks for the information it’s very helpful
Very useful information! Thanks Steve! 😄
Thank you for all of the useful information! It's good to be reminded of these things from time to time.
Great vid Steve … love the advice
Thank you very much for this video.
Great info...thanks !!!
Thanks Steve great information 😘🦋
Brilliant information thank you still experimenting myself and very new to all this xx
It's a shame there wasn't such an informative video back when I started casting! There was a lot of learning the hard way about the properties of different materials!
Thank you for sharing your expertise!
Thank you so much for this video! I always learn so much from your videos. I've really gotten n2 doing uv resin jewelry and 2 part resin stuff and you have helped so much!!!
Steve thank you so much! I needed this tutorial. Hope you are doing better. God bless you and your family and furbabies.
Wonderful information thank you for sharing.
Super helpful, thank you!
Thank you for sharing your knowledge ,and all your videos great information ,and entertainment
You're a riot and I enjoy your videos so much!! Thanks for the great info and the laughs!! 🥰🥰
Thank you for the wonderful tips
Thank you so much for this video Steve. I really needed this. I just want you to know, I think you're awesome, you do really cool things. I've learned a lot from your videos. 🙂❤️
Love your videos! Very informative.
Thank you Steve! May God bless you! I really really needed this video. Thank you for making this video. Really needed this!
Brilliant info, thanks for this. I'm always confused by the different epoxys out there and this has REALLY helped. Xx
Just discovering how amazing epoxy is! Loving your videos Steve. Thank you.x
Thank you so much!
Thank you so much for making this video, I have tried to find someone to explain all the different resins as I find it like a mind field. This is a really useful video. Thanks again 👌👌👌
So much awesome information Thank u so much
Brilliant video, I have saved it so I can refer back to it. Thank you & lovely to see your face again
Thank you so much for this video. You’ve answered many questions for me. I’m about a year into resin art and have never found these answers straight forward
This is the most useful video I've seen on this subject. Very clear. (No bubbles. LOL.) Thanks!
Thank you for the information. It will definitely help a beginner like myself
I really love your videos, I've been pouring resin since 2012 and had to learn many of your tips by trial and error and a lot of research. I love how you cover all of the good and bad info, great info for resin users to have to avoid having to learn on their own. Would have saved me a lot of time lol. Keep up the great work.
Fantastic video!! I’m new to resin and have spent hours trying to find these answers! You rock!
Thank you so much for your latest clean-up video! My tools and area were in a real mess but not anymore! Tools and molds are clean and nothing is sticky, PLUS Im able to recycle my tools. 🙌🙌🙌🙏🇦🇺💕
So many thanks for the links, it makes such a difference for the PU resin!!! my amazon fu is usually pretty good, but this was awesome, thank you for all that work.
I've just gotten interested in doing resin. I have to say I love your videos. I feel encouraged when I watch them. Thank you.
hi steve this video is just what i needed ... i have just strarted using your PU resin , Must say its brillent many thank x
HI Steve
I am a newby an i have been looking at starting pouring either using paint or resin so i am so happy i found your channel so i wanted to say thank you and i will be joining ass soon as i have bought the resin and i will buy you a coffee then but until then i wanted to say thank you as your attention to detail is second to none and i love it xxx I will be watching all your videos from now on xxxx All my love Tracey x
This video is great for beginners, who might not know that there are so many different types of resins & what to use depending on what you're making & what type of mold you're using. But it's also nice for those of us who have been doing this for a while, as a refresher. Thanks for the info!
I can't see where to send you a PM so here goes. I saw every video you've made. I learned more than I originally knew. I usually make tumblers, but have used molds as well. I purchased the JDiction fast curing on your suggestion. I have had nothing but trouble for WEEKS! I thought it might be the temp in my workshop, then the humidity. After fixing those I was still getting pits in my epoxy. When I say pits I mean thousands of pits. Not like regular bubbles. I could feel them like they were sand! I had much trouble scraping off my epoxy so I did not have to go through so much sanding as I have done for weeks now. That's when I realized that it was the epoxy, not the temp or humidity or anything else. What is happening? I have used it at room temp and I have warmed it in a sink of hot water. I have applied it with my hands. I have applied it with my spatula. Thin coats, thick coats. Every time I get pitting...lots and lots of pitting! This epoxy is very bad for tumblers. I do not usually have any issues creating my beautiful tumblers... until I ran out of my epoxy and started using the JDiction at your suggestion. And then I was so depressed and started questioning my own abilities. Has anyone else had this problem? As I said, you can literally feel something like 'sand' under your fingers as you apply this resin!
Yes, I had the same issue with jdiction resin on tumblers. I got with my contact over there and they were just finding out about the issue too so now they will state on that specific resin that it is not for use on tumblers 🥲 luckily I was able to use it up for other projects 🥰 I haven't done any resin for awhile now so they may have come out with something special for tumblers now. I also LOVE jdiction products! I have used their casting resin, doming resin (4 hr cure), their clear silicone for mold making and also their UV resin (that was the first product I tried) and I will never use a different UV resin ever again bc it's the absolute best by far! I also love their mica powders! In fact I got quite a large set for free way back and they're just gorgeous 😍.
Great job working on yourself. Proud of you. Great haircut too!
Yay thanks for the video, I'm happy to report that between watching you and
"Pour Your Heart Out", I've managed to put together the kit I need to make resin items and also to keep safe. Thanks for that Steve.
I'm a traditional Artist for more years than I care to remember. Lol!! Who specialises in Watercolour, oils, acrylic, ink and coloured pencils With Polymore clay as a craft I enjoy working with. There is a lot of mediums I have tackled. However, resin is a new one, and I'm glad there are CZcamsrs who know what its all about. Thanks again :-)
Thanks!
Alright, I'm trusting you and purchasing the resin you recommend!
Brilliant video. Thank you Steve. Can you do a video on cleaning moulds etc xxxx
Good call on the polyester resin..the stuff is so brutal..I'm sticking with the others..Hello from Canada 🇨🇦
Thanks for the very informative video 🥰🇦🇺
i love it Thank you
I am a resin beginner and I'm so happy I found your channel! You are so knowledgeable and fun!!!! Thanks for all the info!!!! Quick question: do you need to add a top coat to a tray? and if so, do you know what brand/type? I'm in the USA. Thanks Steve and cheers!
Thank you this helps a lot. What about different viscosity?
Thank you for all this information in a very confusing art form. Everyone says THEIR product is the best....I'm new to using resin for coasters, painted vases, and canvas paintings. So confusing
Thank you Steve. So far I like the UV resin for the jewellery pieces I make as I rarely waste any. I have a UV nail light I use which has a timer. Seems to work very well.
What kind of UV nail light? Jw cause I have one and the resin always turns out tacky/sticky/ not cured all the way. I leave it in for 120 secs still not cured all the way. So, I wonder if its the wrong resin to the uv light 🤷♀
@@denim2132 it was a light that came with a nail set I bought several years ago. No particular brand that I can see 🤔 It does have light on 3 sides though. The only time it doesn’t seem to work is if I use too much alcohol ink. Learned that lesson! Also can’t be too deep.
New sub!!! From USA, I'm new to resin...
We get many nice sunny days. UK. I don't like it when it's too hot though.
You aare right about the UK weather, it is piss-awful LOL
Thanks for the video Steve. I wondered and not quite sure still, if I was only going to make keychains and or coasters what Brand and type of Resin would you suggest?
That was really useful and informative thanks. I love the PU resin as it works so fast. Take care
Brilliant tips. I've got myself some of this resin now. Can you tell me if it's heat resistant? As I can't find info about this. Thanks Tracey
Hi Stephen. Love your channel. Is this resin heat resistant. I want to cover hand painted coasters. Thanks
HI Steve, I have just Subscribed to your resin channel on u tube the video you posted was really helpful & I liked the fact that you Where honest about the different resins you where Talking about 👍 I have only been using resin for about ( 2 months) so very new to the Whole process I have Been using the resin Called. ( CRAFT RESIN ). have you used this resin & if so what do you think of it ? ………
I am going to head over to your channel & have a look at the different tutorials you have posted ALL THE BEST LIN ✨👍🙂
Thank you for this video. It was helpful as far as it goes. I have found that many brands just say "resin" and don't say casting, deep coat, UV, etc. I have made some pretty bad resin mistakes. One resin I bought must have been one of the ones you described as 5-minute resin though it didn't say so on the package. It called for being mixed twice. Mix A & B for so many minutes, then pour it into another cup and mix again. (Don't know why it needed another cup and a second mixing). When I mixed the 2nd time it got really hot and hardened before I could do anything with it. I'm a real newbie to resin and mostly use it to seal paintings. I've had one brand turn yellow, which was a shame since I had 2 paintings that went together. The white in one painting is great, the other using a different brand is slightly off white and actually doesn't look bad until you put them side by side. This happened during the worst of the pandemic and I was blindly ordering stuff on line and taking what was available. I have watched several of your videos and really enjoy them. Again, thank you for sharing.
nearly all 2 part resins call for mixing a second time in a new cup. The general purpose of this is to ensure you're not scraping out unmixed resin into your mold which would inhibit curing, most resin artists I've found (including myself) seem to prefer using just one cup, mixing it well and scraping the sides as you go. It's a bit of a risk, but I've only ever had issues the first time I add colorant to a 2 min pot time PU resin. For me, any resin with 5+ minutes of pot time can get a thorough mixing in one cup.
I wonder, can you mix pigments into your part A PU resin before mixing with part B? The only PU resin I've been able to get my hands is the Amazing stuff, and it seems like it has a pot time of about 3.5 seconds, so anything that might give me a tiny bit more time to pour would be helpful!😅
Hi could you tell me what would be best to cover a can of pop in a silicone cylinder mould please 🙏 🙂
Hi Steve. I am a totally beginner on this. I want to try to do a project. In one of your videos you mention a release spray. Would you let me know what type of spray or when I go to the store to get it what I need to ask about.
Another question will be that some imperfections you sand it but what do you use to make it clear after sanding.
Thank you kindly in advance 😊
Can I spray my finished resin piece with Montana uv protection spray to protect it from yellowing ?
LOVING this video, taking notes like a school girl, and mean no disrespect but wonder why the first two resins listed for USA as Art and Casting have the same link. Could you help us, wise sage??
Can you use resin to make tea candle holders? Are there any issues with a hot candle against the resin?
Just out of curiosity, what type of resin would you use to infill carvings in wood, e.g. patterns or lettering cut with a CNC machine. I normally cut to 2-3mm deep. Thank you, Steve.
So if I have something like an abalone shell I want to make shiny and glossy, should I even be using resin? What would be the best one to use for that?
Sounds like either the polyurethane resin or the art or coating resin (1 to .5 parts)? Could I use either?
When you say none are food grade. What about the spoon rest molds are they safe since you are putting an item on it and then back to your food?
Hello where can I get the coaster heater can I heat resin in a cup
can we use resin to preserve a plaster mold?
I didn't know about the UV light. How do you know how strong your light is?
Question= How long do you keep the uv light on for it too cure?
I've never heard of the first 2 types of resin.
I made a cutting board with the colored resin just on the top part. I would assume the large portion that has nothing on it is food safe. It was a commercially made cutting board.
Can you still use resin if it has turned yellow?
Dear uncle, could I have a question, could I mix flexible epoxy resin with hard epoxy resin to control the flexible level of product? thank you and waiting your answer ^^
The more powerful the torch, the more likely the resin is to cook the mold, however! You can do permanent damage to molds with U.V. resin! I've warped quite a few before I realized what was going on!
I used PU resin for the first time. But how do you colour it. I used glitter and mica and it cured white or very pale colour. Glitter was non existent in it... would love to know how to get a good vibrant colour with it
@@SteveMcDonaldArtsandCrafts Thanks Steve! I'll give that a go. I do like the PU as I used it to make wine caddys, so love the hardness of it - no drooping :)
It's my understanding taht in the US, if it claims to be food safe, it must have passed FDA approval.
I wouldn't heat it and proceed to serve anything in it. The same is true of any plastics. Borosilicate is apparently safe.
Have you used jesmonite? I see many videos from Australia artists that love it. I never have used it, don't think I like it. How about you?
Hey,i just wanted to ask if you ever used an Indian brand and if yes ur opinion/suggestions on the same...
If I could give you a million thumbs up for the ‘not food safe’ comment I would!!!!
The links to resin shops don’t exist
👍👍👍👍🙏🙏🙏🙏🙏❤️❤️❤️❤️❤️❤️
Steve, this is another video that I took a second look at, and I've changed another dislike to a like. I now appreciate all of the info., especially since there's so many people giving out info, or doing videos. I like that you do experiments with things, so viewers can actually see. Thanks for all of the important info.
Yes you look healthier.
How did you lose weight Steve please