Multi zone Thermostat with Home Assistant, Node-Red, Aqara, Sonoff Basic Zigbee
Vložit
- čas přidán 5. 09. 2024
- In this video I share my multi zone thermostat that is active in my home.
The beauty of these DIY solutions is that anyone can improve and perfect these until they are their own like.
Link to NodeRed flow:
drive.google.c...
Link to zigbee router video:
• Zigbee coordinator/rou...
Link to Sonoff Zigbee dry relay:
• Zigbee dry contact rel...
Ești cel mai Tare !!!
would be nice to see the wiring schematic for this to help have an idea of how everything is linked together
Thanks a lot!
Salutare, in flux ai un switch pe care ma chinui sa-l inteleg. Un exemplu TRW Living iar ca entitate gasesc switch.trw_zone_living. Este vorba de TRV in sine sau chiar exista un switch fizic care activeaza TRVul? Sau.. chiar este climate.trv_living? Merci
Este vb de un sonoff basic care activează bobina de pe distribuitor, deci este un switch
Hi, does the temperaure in the room overshoot? If it does then you need to add proprtional control compared with on off as it now. With proprtional control as the temperature gets near to the set point temperature the water valve will be slightly closed.
Maybe 0.5 degrees C, but barely noticeable. For me it is just fine. It don't see myself investing in proportional valves just for this.
The valve does not need to be changed. It is the conrol, for instance on for 10 minutes then off for 10 minutes would reduce the heating by 50%.
@@mikey8156 like I mentioned, I don't mind the overheat. The valve shuts down when temperature is reached. Valve takes about 2 minutes to close so if in another zone heat is on there will be 2 more minutes of heating + residual heat from radiator. I am fine with this. What is worth eventually doing is buying opentherm capable boiler and regulating water temperature directly from the boiler but for now this is off the table for me. Current boiler is only 1 season old.
I have just bought a boiler with opentherm. I can highly recommend it. You could try to replicate what opentherm does if you have access to the water temperature.
Hola loco! Viendo que tienes tú termostato tado y válvulas de otra marca, me.gustaria que nos explicarás cómo las haces funcionar en conjunto en HA. Automatizaciones hechas a mano? Algún HACS? Es que se me ocurren automatizaciones quizás demasiado complejas para, por ejemplo, forzar encender/subir el termostato si una válvula pude chicha y/o bajar el termostato si todas las válvulas están por debajo de la temperatura objetivo del termostato
Como puede ver, hice automatizaciones con Nodered, que es un complemento HA.
@@DIYHelper gracias!
Salut! Foarte interesant proiectul tau. M-ar interesa cum se prezinta la 1 an de cand l-ai facut? Functioneaza totul ok? a trebuit sa intervii des la el sau ceva? Si daca ai undeva mai detaliat acest proiect, gen pe platforma github. Cu lista si linkuri piese folosite, codul folosit si o documentatie step by step. Eu as fi interesat sa fac un proiect asemanator pentru o incalzire prin pardosea cu control asupra 12 zone. Ce gasesc in comert ori sunt rudimentare rau, ori costa o avere. Astept un raspuns din partea ta, mersi!
Salut, a mers fără probleme. Din păcate nu am documentat mai mult decât acest video. Senzorii sunt Aqara, actuatoare Salus (sub brand Romstal), relee zigbee pentru actuatoare sonoff basic și pentru centrala sonoff zigbee modificat pentru contact dry. Softul de baza Home Assistant care rulează pe un server Intel nuc. Automatizarea este în Node-Red care este un add-on pentru home assistant.
Hi, can you approve my request for access to the google drive flow? I am trying to recreate it manually, seems identical (based on my entities) but I can't seem to make it work, stops in the middle of the flow.
All requests are approved
noticed that, thanks a lot
You can set the speed to 2.0 as he speaks extremely slowly and repeats almost every word