Video

Hi, Which 12 teeth caper you use the release the bearing? Which # you use?

I had the cl model with the easystart. It was on sale for half price. I loved it, used it the last few years on my daily driver Volkswagen. In winter here it can get so cold that a few nights a year i wanted to run it all night. I could not do that, the timer only let me go 2 hours. I just changed it out for the cs model. With the easystart pro. Not only do i now have the option for up to 12 hours or infinity just in the timer, but i can later if i want, use the s+ for other options. I think the cl was a pretty poorly implemented. If eberspacher had made a s+ input into the controller would have been fine, or let longer run times, i was perfectly happy with my heater, just hated the two hour limit.

I am a small fleet mechanic and we have about 10 of the original airtronic heaters , when a driver says it's not working it has only ever been a bad gasket for the cumbustion chamber. Simply disassemble clean and put in a new gasket. Recently I installed a new airtronic 3. I have not disassembled one yet, the wiring looks more difficult difficult being in one plug rather than each sensor and glow plug having there own plugs.

Thanks for the video. First time working on a diesel heater. Problems starling and white smoke. Cleaning the diffuser, plug and burn chamber made it work again. 😊

Salut,ce parere ai despre s3,merita, sau e mai bun webasto?

Un glet de valoare este... Gletul de ipsos tata ați înțeles... Dar.... Cine știe sa îl tragă pe pereți.... Asta pt cine știe, nu pentru toți meseriași de cartier 20-30 de ani pământești.... Ca pe unt... Se ia din butoiul de varza de 60 de litri👍👍👍👍

Thanks for the great video. I have a Hydronic D4W 12v (25 2096 05 00 00) but the control panel was not covered in the video. It is a Combitronic panel and the temperature up and down and enter buttons stopped working?? Can I use the Easy Start Timer as a replacement?

Cum de nu ați testat nimic de la Knauf? Cele la găleată?

Cel de la fino grande mi s-a parut ca se intareste foarte repede (mi s-a intarit in galeata in 10-15 minute). Poate am nimerit eu un sac vechi...

Thanks so much for this, just what I was looking to do after I purchased both these sensors for an ESP project. I have used your file and ordered a handful via JLPCB. Appreciate your efforts and sharing this with the community.😃

Just pull the fan back a little bit 😂😂

Qhy do people keep poppin that end cap off to remove the unit theres absolutely no need for it

Always new o rings.

Price

Is there anything I missed to press, like the button you pressed before it supply out

After Modifying mine, it's not working...

Very well done! 😊

If your using it with 3000w inverter and minimum 300ah of Lithium batteries, you need to add a soft start to dampen the LRA of 48.5a to something less than 24a. Looking at the wiring diagram it's clear from the wiring diagram that there is no soft start, the type that significantly dampens LRA rating. Otherwise the Lithium battery can't supply the huge compressor start in-rush current. I had to add a SoftStartRV to my Atmos to get it to work from my 13vDC Lithium battery/3000w system. The SoftStartRV did solve the compressor in-rush issue by cutting it in half. I don't understand why a soft start wouldn't be automatically incorporated to reduce the LRA to less than 24a for a real game changing RV air conditioner on 120vAC or 13vdc power systems alike.

Very good thank you, I'm doing my fabia estate 2006 soon and this has helped me greatly!!!!

Timewaster!

Nice video. This is a different animal than a Hydronic 10. Why not coat the screws lightly with Anti-Seize to ease latter disassembly?

Did it ever work?

Daca tot ai vrut sa incerci mai multe categorii de glet trebuia sa aduci si gleturile Apla , au cel mai bun glet de incarcare

Cool (or hot). My kit (not and Airtronic, but not a knock off either) came with an intake silencer. It's maybe a fraction smaller than the one you have here, iIt's not easy to tell and it also makes a big difference. I think it knocks down some of the combustion roar that comes back up the air path and also the noise from the blade tips. Intake piping is also useful as it reduces the chance of sucking up stuff into the heater. It also makes the heater less noisy for anyone else close by. Thanks for this!

I truly love your channel. Keep doing the best work! 👍

DEPINDE ȘI DE MANA DE LUCRU

You are a legend, thankyou very much. This fixed mine and now it's flawless!

Thanks for sharing this video. I have tried ZHA and Zigbee2mqtt both in Home Assistant and I decided to stick in with Zigbee2mqtt since some features are better supported with this. The plugs have for example the child lock function which is normally available in the original Tuya app. This feature is missing for some switches in ZHA but in Zigbee2mqtt it is available.

Exactly what I was wondering about the thermal paste. Thanks

Good video. Any idea when staring it sounds like a plane taking off?

Magnificent very helpful thank you

How did you pair the switch? That's what we all want to know

Hello, do you know anything about error 71 and 17? I can see that it is related to the temperature sensor, i tried measuring the resistance on the sensor and that reads okay. I tried shorting the wires to the sensor like the manual says to do, but that didnt change anything either. I originaly had the error 31 and used you video to fix it, but now i get the error 71 and 17. I read in the manual that to test the controller for the heater i would need the diagnostic tool you use in this video but i dont have access to one. I hope you have an idea for a solution.

hello I have my unit locked what is the usual cost for a repair like this ?? thank you

Наклейку сними, чепух

Back to school for lessons

Good morning first of all thank you for the beautiful videos I am an Italian who has an Eberspacher hidronic Q4W sc could you help me to repair it? If so, please give me my email, thanks

Thanks for this truly excellent video. Very well done!!

Thank you for nice video I have just cleaned my filter after using your video. Once again Thank you very much

Multu pentru video, am reusit sa resuscitez si eu unu cu problema asemanatoare! ✌️🤟

What’s the tune?

I wrote to you on Instagram. Can we write? I have a few questions.

Is it hard to remove this heater from the car? Is it safe to run car when heater removed?

Thanks for the video. I had the same fuel problem and was able to save the pump by polishing out those scratches, works perfectly now! Also for you DIYs with out testing equipment. On your B2 connector pin #5 and #2 you can use a LED with a 1K resistor to get the flashing error codes. If the unit is locked out you can take the yellow and red wire and apply DC power to it for 3sec. then the unit will unlock.

I have the same heater but it will not get hot just blows cold i had it all apart glow plug works of a battery but fan only comes on in the high setting any help would be great thanks 👍

Thanks for taking the time to do such a great video for us. I've had my espar running only ~6mo with regularly screen servicing. I'll use your tutorial to go through everything.

well how do you clean it the right way ?

Safety pressure for valve in the compresor is 8 bar. Higher pressure can damage pwm valve.

Changed the fuel pump,screen ,heat sensor ,screen and glow plug unite runs for.5-10 minutes and shuts off. Can you help

Chinese heater cost under $80. to your door VS $900-2500.00 same problem and issues. can't go wrong with the Chinese heater 10 for the price of 1...