Simple but Extremely Beautiful | Textured Wooden Box Project
Vložit
- čas přidán 6. 09. 2024
- This Jewelry box is made from scrap walnut and oak. It's a beautiful, hand-carved piece that looks expensive but is super simple to make.
It doesn't require fancy joinery or any special tools. The only thing that needed to be invested in this box was time. Hand carving takes a while!
This whole project was super fun to make, and it was a nice practice for me as well to remember the basics. I think it is a good habit to knock off a small project now and then to go through the fundamentals. Most of the time I find another method that I can do the same thing more efficiently.
This Box can be the perfect woodworking gift. This Wooden Box takes very little material but makes the most of it with a splendid texture that will impress anyone lucky enough to receive it. It's perfect for storing a loved one's memories or even your own artworks, jewelry and other treasures!
Overall, it was a great project, and I hope you will enjoy the video and learn a few tips and tricks.
•• My Links ••
Website: www.kardamov.com
Etsy Store: www.etsy.com/u...
------------------------------
Music from Uppbeat (free for Creators!):
uppbeat.io/t/i...
License code: ZSYME76RF8S7QOQ5
------------------------------
Music from Uppbeat (free for Creators!):
uppbeat.io/t/p...
License code: AAZREFBN26CDVTC3
------------------------------
Music from Uppbeat (free for Creators!):
uppbeat.io/t/p...
License code: RMJJQQ8PQX8IOMDA
------------------------------
You can never have too many clamps 😁
True!
Or too much glue!
Awesome job! Simple yet stunning design. It's refreshing to watch a video about actually build something instead of these CZcams woodworkers trying to sell you tools. Never once did you have to mention what kind of tools you used to create this beautiful box. In my opinion, it doesn't matter what you use to create your project, what matters is what your project looks like when you're finished. Great video
Thanks for the comment. I agree that the end product is more important than what you use to my it.
Well done A**. Great use of offcuts. Glad i found your channel
Thanks and welcome. Hope you like my future videos, as well. :)
Hey 👋 This box is lovely. The texture really makes this box very special. Great job!!!
Thanks so much! 😊
How long was your carving time? Beautiful
Love the use of tape on the clamps so easy to clean up the glue.
It definitely saves time.
A bit of wax on the clamps does the same thing
Wonderful !
Glad you like it!
very nice, thanks
Thank you !
WOW!!!❤❤❤❤👍💓🔥
😊
I love the look of the box, time consuming but worth it lol. Awesome job! Thanks for sharing.
Thanks a lot!
This is a great inspiration. Thanks for sharing this project.
You are so welcome!
Nicely done!
Thanks!
love the texture
Thanks:)
the carving really looks like the bark of the tree. Great project! It reminds me that I need to use my eight million pieces of scrap walnut i've never thrown away🤦🏻♂️😜
It does look like a bit. Thanks.
super little box 👍👍👍💯 I remember the technique for locking the small parts on your format saw using a rail press 😉👍 great idea. thank you for this video 🙏😉
Thanks 👍
This Box Looks very beautiful!! I wonder, if it got cracks because you added the inner parts to keep the top in a perfect position. Actually theese parts would prevent the outer parts from shrinking if they should because of a change of the humidity of the surrounding Air.🤷
Thanks. I am still using it and it looks as good as new. Not cracks so far.
A perfect match for the coming Christmas season 🎄🎁💖
Yes, it is:)
Мастеру браво!!!
Thanks!
beautiful box, the texture is 🤌
Thanks!
this video is awesome bro! Thanks for your channel!
Thanks mate!
cant never have to many clamps
True!
I find that almost every day!
Beautiful!! Your gonna have 100 k + subscribers if you keep posting videos like this. 👊🏻
Then I should make projects like this :)
Really amazing project! Thank you. I really enjoyed this video.
Glad you enjoyed it!
Nice box, nice job on the texture, noticed you didn't show cutting the lid off, mine usually have
problems if the box isn't perfect square.
I forgot to press record. Mine wasn't perfectly square, but luckily, I have a huge table saw that I can square it up after the glue-up.
Just beautiful and within my capabilities so thank you.
Cool!
This is in a similar style to David Pyes fluted bowl he made many years ago. I love this design and please check him out.
Thanks, I will check him out.
totally beautiful. what did you use as the final coat?
I used %80 Bondex Hardwood oil mixed with %20 Hard Wax Oil. I am not sure if you can find the brands outside Germany.
Hermoso trabajo.
Thank you!
The result is well worth the effort!
I agree!
Very cool.
Reminds me of some briar pipe finishes.
Thanks, I haven't had that in my mind, but the texture resembles some pipe finishes indeed.
Beautiful work!
Thank you very much!
Great job
Thanks!
Brilliant design and smart techniques.😊😊😊
Thanks a lot 😊
That is badass, man! Beautiful job!
Thank you!
great work
!
Thanks a lot!
lovely work
Thanks!
Love that textured look
Thank you.
Lovely work. Love the details.
Thank you very much!
Great idea & execution. You seem to know your stuff my man!!! 10/10.
I appreciate that!
It remind me Kosambi wood naturally when open the skin tree looks like you carving
I don't think I have see that before. I will check it out.
nice
Thanks
Beautiful piece!!!!
Thank you very much!
Wow it's beautiful 👍🏾🇬🇧💙
Thank you so much!
Woooow, the box looks amazing!! I couldn't click on the video fast enough when I saw theat gorgeous thumbnail :D
Glad you liked it. It came out really nice:)
Love the design 👍👍
Thank you!
Beautiful✨
Thank you! 😊
Beautiful.
Thank you!
The box looks amazing. What finish did you use?
Thank you! I used %80 Bondex Hardwood oil mixed with %20 Hard Wax Oil. I am not sure if you can find the brands outside Germany.
@KardamovMakes thanks for replying, I'll take a look
Beautiful
Thanks!
I love walnut. You put together a lot of off-cuts (not scrap) to make a very nice box. Nice job of texturing. Nice finish. Good use of the oak for a liner. Overall an excellent project.👍👍 That was the good. Now for the bad. I hated the music. It's boring and annoying. If you must have music pick something soothing and that doesn't repeat over and over.😥😥 Still, thank you for sharing. Have a great day and stay safe.🙂🙂
Thank you very much for the comment. Will try to pick something smoother in the future videos.
Superb!
Thanks a lot!
Amazing
Thanks
What finish did you apply?
Check the comment from DogDog173 .
Beautiful work.
Subscribed.
Thanks for the sub!
Cool 👍🏽
Thanks!
So sickkkkk!
Thanks!
Nice project👍
Thank you!
Wow!!!
Thanks :)
Such a difficult job.
I can't imagine how much it might cost.😅
It definitely takes time. Unfortunately, I wouldn't be able to afford it myself.
вещь!!!
👍
-How many clamps do you have?
-Yes.
Not enough, I think.
Amazing work. What finish do you use?
Thank you! I used %80 Bondex Hardwood oil mixed with %20 Hard Wax Oil. I am not sure if you can find the brands outside Germany.
@@KardamovMakes I believe Bondex is a solvent based oil. Probably similar to teak or tung oils
fantastic
Thanks
nice job!
Thanks!
Bummer, no link or mention about the chisel being used to get that texturing. Hopefully it won’t be too hard to find one that can do something similar to that texturing work.
Martind.4930 had the same question. Check out the comment from him to find out about the chisel. It's not so hard to find the chisel.
sehr cooles Kistchen - schade, dass es dieses nicht in Deinem Shop zu kaufen gibt
Ich hatte vor, dieses Design auch in verschiedenen Größen auf meiner Website anzubieten.
Wenn du weiterhin Interesse daran hast, kontaktiere mich über meine Website.
Danke.
@@KardamovMakes PM auf Etsy ist raus - vielen Dank Dir! :)
👍💓!!
🙂
What should I put in such a cool box?
I'd put something that you use quite often then you can have the box somewhere you see every day ;)
I made it for a bottle of wine
Very Nice!! DD
👍
Which kind of finish do you use ?
I used %80 Bondex Hardwood oil mixed with %20 Hard Wax Oil. I am not sure if you can find the brands outside Germany.
Perfeito
Thanks
What is the liquid u put on the wood in the end to make the wood appear darker?
It is a normal wood oil ( Brand - Bondex Hardwood Oil) . Most oils would make the wood look darker.
Really nice! What kind kf chisle is that? Cheers!
You can find it out in the comments;)
Check out the comment from martind.4930 .
how much would you sell something like this - asking cus im a new woodworker and im not sure how to price time consuming projects. thanks. its awesome btw.
Advice I got was the price of materials should be the lostest "labour" cost. As time go on and you have experience, pricing won't be such a problem. Good luck 👍
There are so my different opinions about this topic. I suggest, there are some videos about that topic on CZcams. Just watch few of them and come up with number that feel good to you.
👏👏👏👏👏
👍
What is the brand name of the finish you use?
I used %80 Bondex Hardwood oil mixed with %20 OLI-Natura Hard Wax Oil. I am not sure if you can find the brands outside Germany.
Bellissimo complimenti, gentilmente mi daresti le misure e lo spessore del legno che hai usato? grazie mille
It was a one-off project. If I recall correctly, The walnut was approximately 10 mm thick after being cut to the final dimensions.
❤😮
😊
3:26 Not enough clamps. You need more.
I luckily have way more than that.
Time consuming job in 20sec 😂😂😂 i had to laugh!!!
Good. Then it served its purpose 😉
I would like to get that chisel, how it is called? (so i can google it)
BeaverCraft is the brand. It's a Ukrainian brand. I bought some of their chisels to support the company.
@@KardamovMakes Thank you, they are available on Amazon, is the one you used is the 8A/14 ?
Yes, it is.
😁
How is this simple???
Well, the design is quite simple but application is not so simple.
Creepy music!
I do like it but seems like you are not the only one don't like the music.
Nice looking box , but I don’t understand making all that end grain only to carve it up. Hours of labor for nothing.
I don't think it's for nothing. I like the look of it 🙂
The end grain are on the top and bottom, not the carved sides. Also, your comment was not pleasant. The box is obviously to his liking. (I agree.) No need for you to put it down.
@@DavZellI was gonna say, this guy watched the whole video to not even notice the box's actual construction then moan about a non issue revealing his poor observational skills...
@@DavZell I was not putting it down at all. It was my observation. You’re a little too sensitive don’t you think. I thought the box came out great. Get over it. I’ve been a furniture maker for 60 years. Criticism is what Make us better. It’s called constructive criticism.
@@sphlouge "Hours of labor for nothing" isn't constructive, and in fact was incorrect, because he did not carve the end grain. 60 - wow, I hope you're able to enjoy your hobby for at least a few more. Be well.
That added texture made it soooo beautiful 😍 way to go!
Thanks, it puts the box in another league. I agree:)
Shirt
👍
Look really interesting your design...great job and dont forget follow us too..👍🧡
Thank you! Cheers!