25 psi for base. Clearing with iwata supernova about 28 psi clearing with sata about 30 psi. I have fluid fully open for all my guns. Fan on satas are fully open. Iwata supernova fan is about 3 turns out.
15 is definitely a lot for a bumper. Especially with Axalta. This stuff covers so well. It only takes me about 9 for a bumper. Depending on size. But usually about 5 for replacement panels or whole door (not including door jambs.) and 3 for blend panel.
I think this was a more medium gray. But yeah for the most part. This paint covers extremely well. Haven’t noticed any problem with the color sealers I’ve chose.
@@everyday_painterthank for the input. I know with auto wave plus the closer the sealer was the better coverage you got. Just recently switched over to spies as well
Undercoat definitely mattered with Autowave. When I used Autowave I had the colorbuild system as well so I would use color primer and sealer. Spies is nice. It doesn’t seam to matter what the undercoat is. It covers. Haha.
Thank you! I love the way both of them spray. Iwata seems easier to go for a glass like finish. The 5500 is an amazing gun though. I use the I cap for clear with a 1.3. It lays it out nice and hammers it on. Which is great for this clearcoat.
👍👍👍👍👍👍
Hello, how long time do you wait between the layers?
1.2O for base….& 1.3 I for clear ?? do you ever use the HVLP
Nice job man
Thank you! I appreciate it! 👍🏻👍🏻
Do you ever have problems with certain colors not laying down nice? I noticed about half the colors have alot of peal in them.
Most colors look like they have a lot of pearl when wet. But should dry flat. Spies is very thick. But it always is nice and smooth when dry.
Seems mostly colors with 385 is thick. I take it you work for caliber to
What air pressure do you spray base ? Clear? Also are you full fluid and full fan ?
25 psi for base. Clearing with iwata supernova about 28 psi clearing with sata about 30 psi. I have fluid fully open for all my guns. Fan on satas are fully open. Iwata supernova fan is about 3 turns out.
How much base coat did you mix for.this.job
I think I mixed about 17 ounces for this job.
@@everyday_painter I must be doing something wrong I use cromax pro and it takes me 15 for just a bumper
15 is definitely a lot for a bumper. Especially with Axalta. This stuff covers so well. It only takes me about 9 for a bumper. Depending on size. But usually about 5 for replacement panels or whole door (not including door jambs.) and 3 for blend panel.
Are you always using a light grey sealer for dark colors?
I think this was a more medium gray. But yeah for the most part. This paint covers extremely well. Haven’t noticed any problem with the color sealers I’ve chose.
@@everyday_painterthank for the input. I know with auto wave plus the closer the sealer was the better coverage you got. Just recently switched over to spies as well
Undercoat definitely mattered with Autowave. When I used Autowave I had the colorbuild system as well so I would use color primer and sealer. Spies is nice. It doesn’t seam to matter what the undercoat is. It covers. Haha.
Do you prefer sata 5500 o iwata ws400 for clearcoat? You are a fantastic player
AMAZING
Thank you! I love the way both of them spray. Iwata seems easier to go for a glass like finish. The 5500 is an amazing gun though. I use the I cap for clear with a 1.3. It lays it out nice and hammers it on. Which is great for this clearcoat.
Everyday Painter if you choose one?🤔😂
Everyday Painter for 5500 the best is 1,3i or 1,3o?
What type of gun do u use for spraying sealer? Awesome job bro
I use a sata 4000 HVLP 1.4 for sealer.
Thank you!
Thank you for the info
No problem.