Permahyd Hi-TEC 480 - Application Guide
Vložit
- čas přidán 9. 09. 2024
- In this video we show the essential aspects of applying Hi-TEC 480 on the full side of a car. The focus on several key points like how the 1.5 coat process should look like, the importance of spray gun distance, how to control overlaps and how the basecoat should look whilst it’s still wet.
Follow these simple steps and you will improve your results.
For more videos subscribe to our channel or visit bit.ly/2wSHT6y
Thank you so much I learned something new about painting 👍👍👍👍👍💪💪💪💪💯💯
Thanks for the great tips
I would have liked to see a blend on the fender away from the hood and bumper and a blend on the 1/4 away from the bumper and lift gate. Is there enough room or is the color match so good that it doesn't matter? I can see a difference in the video but hard to tell for sure>
Hi, thanks for taking the time to make contact. The purpose of this video was to show the correct application process wen painting a complete side of a car. For advice on blending we do have other videos that may help you - czcams.com/video/m_EWI86V6xU/video.html czcams.com/video/eSc-8HUwXVQ/video.html
Добрый вечер, MB 977 попал в цвет, клиент остался доволен. Спасибо за совет, с уважением!
Рад, что смогли помочь. Всего наилучшего, продолжайте ...
I love your videos they have helped me a lot but would like to see more in depth on what size spray nozzle Tony was using ,what air pressure and what were the climate conditions in that paint booth (hot,cold,humid,dry?) I hope you make more videos on how different climate conditions affect the waterborne base since what our paint reps aren’t much of help .Would love to attend your training center someday
Thanks for the comments, always nice to know the videos help and are appreciated. From emory the application video was made in winter and the conditions were around 22OC/28% RH. I do recall that I used the slow WT Additve 6052 for this job to help with wetting/rewetting. With regards to other climate related videos we had planned to make a hot and dry version but unfortunately the Covid pandemic prevented us from making it. We will try to get back to that in due course...
👍👍👍👍👍👍
What about solid colours. What's the recommended application method? Nice Phaser, is that HVLP?
Love these tips would like to see more on clear 8180 if possible thx also what set up works best I use a sata 5000 rp 1.3 at about 30 psi waiting for the 5500 to try the I set up if that makes sense keep up the good work
I hated 8180 !!! 8600 , 8035 or 8046 !!! My favorite clears from spies
Ok why dont remowe mirror.