Motorcycle trailer DIY
Vložit
- čas přidán 29. 06. 2019
- After having a hard time to my favorite camping site using my 4x4. I decide to build motorcycle trailer. I design it to carry camping gear up to 50 kg and can be dissemble to fit into car and store it when i dint need it.
i bought a quietcat bicycle trailer last yr for bout 370 bucs on sale new from the manufacturer,along the same lines as to what u built,including trailer suspension.it also has the 4"x20" rear wheel,an upgrade from yours.since it was designed for a bicycle rather than a motorcycle i have decided to motorize my phat tire bicycle.it has been put on hold for bout 2 mths now,but will b finished in bout 2 mths or less.thanks 4 ur inspiration here.
Great, thanks for sharing Sir 🙏
Beautiful welding work!
Thanks bro
Amazing!! Gretting from Chile!! End of the world
Great product! Well done! I'll be subscribing for more content.....Greeting from Sydney, Australia.
Increíble idea, gracias por el video, saludos desde México
Good job buddy 😎
i used to pull a bicycle trailer with 20" tires before,it was a 150cc one,i simply mounted the hitch on the shock bolt at the bottom,but i could go no faster than 30mph because it had the tendency to wanna fishtail.i could get it up to 35 if the heavy weight stayed in the frt,but i feel in the end since their was a tensioned spring on the hitch bar that allowed twisting/swiveling was really the culprit that allowed the trailer to fishtail.
Excellent Post, Thank you for Sharing.
I love it! Thank you so much for sharing.
you're welcome
So good to see you mount the trailer onto the bike frame and not the back wheel / rear fork which causes a very harsh ride for the trailer.
by special jig build near the panier foot peg
Great work.
Nice trailer, well made. I need trailer well made too!
Thanks Roger Baker, get a bigger tyre and Suspension. Small like mine wearing off to fast.
Came across this again....I really like your design, but think your frame is much stronger (and therefore heavier) than it needs to be. I built mine out of 3/4" square steel thin wall tubing and gusseted by 1/4" plywood. It is very strong and much lighter. I am building light because it is being towed by a 1970 Honda Trail 70 / CT70 with 140cc engine. I use a heavy steel wheel as I believe the gyroscopic effects of that rotating mass helps stabilize the trailer as the wheel spins faster.
Using tube pipe with 1 mm thickness is good enough. You can arrange the tube formation to make it stronger. This design is to heavy. I made a new one with tube design 2x lighter than this.
Excelente trabajo 👍
That was awesome!
Thanks bro
Excelente!!!!!!
Not sure how long the trailer wheel will last off road but it would be easy to replace with something more sturdy. Nice design, like the hitch, very good
Do you have plans for this trailer? Of all the ones I have seen, I like yours the best.
Exelente, trabajo
How would this perform during emergency braking while fully loaded?
Excellent job! People would buy those. I think a front wheel from a kx85 would be stronger for hard core off road riding.
Front wheel kx are to expensive. Budget for the build is below 100 dollars.
@@NextBuild I have a front and rear wheel from a kx85. I'm In the US if you pay shipping I'll give them to you. What country are you in?
I would agree. Also is the bearing up to the load weight and the continuous higher speeds that the motorcycle is capable of. Even the front wheel and hub off a 50cc scooter would be better than a bicycle hub
Brilliant
Can you show me how to make attachment to the motorbike..
👍 👍
I need one
Buenas noches en cuanto me vendes los planos soy de Colombia gracias
Bom dia amigo, gostaria de saber se este tipo de reboque de uma roda para moto é necessária ter documento pra rodar nas rodovias... obrigado obrigado pelo
Terbaik. Salam support dari utara
terima kasih bro
@@NextBuild sama2 bosskur
Good 👍
awesome design! care to comment on how did u build the swivels?
Молодец чужеземец!
Do you think a 8kw electric moto can tow it?
i think yes. The drag on it are not to much. unless u going off road.
What did you use for a shock? Do you have a link?
hi Erick, shopee.com.my/product/134784946/7831750418?smtt=0.195148777-1662340772.9
Nice
Thanks
ace cakap melayu.owoh dok pahang starang aku
good job mady.....dey bila mau ngeteh da......persanda ape citer......ada lg ke dh jual
Ada lagi kat sana. Agen paymen cun kalinie. Anytime ko singah cyber atau puchong roger jer.
What is maxx speed with this trailer ?
Above 100km on tarmac, it starts bouncing.
Hi next build. I did mine with out the cage and the absorver just the lower plan but it swing to much. I would like to use the same high as you but i do not have an idea why ti swing to much.
The absorber pivot point are far from the trailer frame pivot point. Or the absorber are too soft.
@@NextBuild im not actually using absorver. if you dont mind ill keep in thouch to show you mine later.
Hi! good job! please tell about weight ?
Hi. It is about 7 kilo. But if you using half inch tube pipe it can be lesser than that.
mantap
I have to ask arent 2 wheel trailers better, more stable even? Why the heck are these legally better?
Two wheel trailer For bicycle only good at tarmac. Once u hit offroad, stone half size of knuckle can make it flip.
@@NextBuild Thanks.
I have been studying these trailers & my question is the high center point. When you go over a hump in the trail. What is the angle where the trailer high centers?
so far difficulty i got is when crossing above 1 feet tree log. only need to slide over. ditch never give me problem yet.
@@NextBuild Im in process of building one too, I have a break-away point point on the swing arm. When Im done, would you like me to show you what I did? Im pretty sure that you could modify your swing arm to adapt this modification if you think its something worth your time.
@@jameshaney4494 yeah sure james. Im building latest trailer for my klx 250. I got a lot of weight reduction because now im using tube instead of square tubing.
@nextbuild what do you mean tube instead of square tubing?
@jameshaney4494 can you share your break-away point with me please? Thanks
💪🔥👍🔥👍🔥👍
Bicycle wheel?
Yup. Bicycle wheel. For motorcycle that move less then 80kmh. It's ok.
@@NextBuild good
Thank you for sharing !!! Love it, love it !!! I always wandered if this type of trailer is a suitable alternative for side racks and pannier system. It seams that yes. What top speed were you able to obtain with that wheel ?
That are offroad bike. It can go only 100kmph max. Still good at that speed.
Bang kalau trailer kecik nak tow motor kena ada permit jpj ke
Kene ada.
@@NextBuild ok bang trima kasih. Sy plan nak buat trailer tarik moto size cub to vx250 guna kenari. Agak2 berapa cost. Dan lokasi abg dimana
@@karlamin9116 bandar saujana putra
@@NextBuild minta contact number bang
@@karlamin9116 0136033454
🏆🇨🇦
Can you make me one?
Yea bro. Where you at?
I know this is 5 years old, but i wanted to know what shock did you used?
mountain bike cargo trailer $260 done
260 meters, broken and in the garbage
Omg make a more durable design and you'll be filthy rich trust me those will blow up and everyone will buy them
How fast can you run on the highway?
the klx's can go as fast at 100 kmh at highway.
@@NextBuild Thank you